43"X, 25"Y, 23"Z, Toyoda Stealth AA1165, 11/2016, 51" x 25", 12,000 RPM   Our stock number: 403846

43 X, 25 Y, 23 Z, Toyoda Stealth AA1165, 11/2016, 51 x 25 , 12,000 RPM

Click on picture below for larger version
43 X, 25 Y, 23 Z, Toyoda Stealth AA1165, 11/2016, 51 x 25 , 12,000 RPM43 X, 25 Y, 23 Z, Toyoda Stealth AA1165, 11/2016, 51 x 25 , 12,000 RPM43 X, 25 Y, 23 Z, Toyoda Stealth AA1165, 11/2016, 51 x 25 , 12,000 RPM43 X, 25 Y, 23 Z, Toyoda Stealth AA1165, 11/2016, 51 x 25 , 12,000 RPM
43 X, 25 Y, 23 Z, Toyoda Stealth AA1165, 11/2016, 51 x 25 , 12,000 RPM43 X, 25 Y, 23 Z, Toyoda Stealth AA1165, 11/2016, 51 x 25 , 12,000 RPM43 X, 25 Y, 23 Z, Toyoda Stealth AA1165, 11/2016, 51 x 25 , 12,000 RPM43 X, 25 Y, 23 Z, Toyoda Stealth AA1165, 11/2016, 51 x 25 , 12,000 RPM

View a video demonstration of this machine by clicking the link below:

https://youtu.be/yC-peS6APoM

To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.

Equipped With:
   Fanuc OiM-D Control - Package A

General Specifications Per OEM Brochure:
   X-Axis Travel:                         43.3" (1,100mm)
   Y-Axis Travel:                         25.6" (650mm)
   Z-Axis Travel:                         23.6" (600mm)
   Distance - Spindle Nose to Table:      4.9" - 28.5" (125-725mm)
   Distance - Spindle Center to Column:   25.6" (650mm)

Table
   Table Size:                            51.2" x 25.6" (1300 x 650mm)
   Table Load:                            2,425 lbs (1,100kg)
   T-Slot Size (Width/Distance/Number):   0.71" x 4.92" x 5
   Table Height from Plant Floor:         35.4" (900mm)

Spindle
   Taper:                                 CAT40,CAT50
   Spindle Motor (Gearbox):               15/20 HP (11/15kW)
   Spindle Motor (Direct Drive):          20/25HP (15/18.5kW)
   Spindle Speed (Direct Drive - CT40):   12,000 RPM
   Spindle Speed (Gearbox Only -  CT50):  6,000 RPM
   Spindle Speed (Gearbox -  CT40):       8,000 RPM
   Spindle Output Torque (Direct Drive):  CT40 - 92 ft lbs (125Nm)
   Spindle Output Torque (CT40 & CT50):   282 ft lbs (380 Nm)
   Spindle Bearing Dia. (Direct Drive):   CT40 - 2.75" (70mm)
   Spindle Bearing Dia. (CT40):           2.95" (75mm)
   Spindle Bearing Dia. (CT50):           3.35" (85mm)

Feed Rates
   Rapid Feedrate (X&Y Axis):             1,181 IPM (30 m/min)
   Rapid Feedrate (Z Axis):               945 IPM (24 m/min)
   Cutting Feedrate:                      945 IPM (24 m/min)

Accuracy
   Positioning Accuracy:                  +.0002" (+.005mm)
   Repeatability:                         +.0001" (+.003mm)

Coolant System
   Coolant Tank Capacity:                 113.5 Gallons
   Flood Coolant (GPM):                   20 Gallons
   CTS Preperation Only:                  1,000 PSI Capable 

ACT - 24 Tool "Drum" Type With "S" Cam Drive
   Tool Magazine Capacity - CT40:         24
   Tool Magazine Capacity - CT50:         24
   Tool Diameter - CT40:                  2.99" (127mm)
   Tool Diameter - CT50:                  5" (127mm)
   Tool Diameter - Empty Pocket - CT40:   5" (127mm)
   Tool Diameter - Empty Pocket - CT50:   9" (229mm)
   Tool Length from Gage Line - CT40:     9.8" (250mm)
   Tool Length from Gage Line - CT50:     11.8" (300mm)
   Tool Weight - CT40:                    15.4 lbs (7kg)
   Tool Weight - CT50:                    33 lbs (15kg)
   Tool Taper:                            CT40/50
   Tool Change Time: Tool to Tool:        3 Seconds
   Tool Selection:                        Random
   Tool Access:                           Bi-Directional

Utilities
   Power Required:                        3 Phase, +10%, 220V (35KVA)
   Air Pressure:                          100 PSI
   Power Supply Frequency:                50/60 Hz
   Control Voltage:                       24 Volt




Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

      RETURN to our home page