Ganesh Genturn-52TTMY, 2015, 6"Chk, 2", Twin Spindle/Turret, Live tools, sub   Our stock number: 404889

Ganesh Genturn-52TTMY, 2015, 6 Chk, 2 , Twin Spindle/Turret, Live tools, sub

Click on picture below for larger version
Ganesh Genturn-52TTMY, 2015, 6 Chk, 2 , Twin Spindle/Turret, Live tools, subGanesh Genturn-52TTMY, 2015, 6 Chk, 2 , Twin Spindle/Turret, Live tools, subGanesh Genturn-52TTMY, 2015, 6 Chk, 2 , Twin Spindle/Turret, Live tools, subGanesh Genturn-52TTMY, 2015, 6 Chk, 2 , Twin Spindle/Turret, Live tools, sub
Ganesh Genturn-52TTMY, 2015, 6 Chk, 2 , Twin Spindle/Turret, Live tools, subGanesh Genturn-52TTMY, 2015, 6 Chk, 2 , Twin Spindle/Turret, Live tools, subGanesh Genturn-52TTMY, 2015, 6 Chk, 2 , Twin Spindle/Turret, Live tools, subGanesh Genturn-52TTMY, 2015, 6 Chk, 2 , Twin Spindle/Turret, Live tools, sub

"To the best of our knowledge all details listed below are deemed correct. It

is the buyer's responsibility to confirm all details and we encourage an

inspection of the machine(s) and accessories prior to purchase."          
============


Equipped With:
  8-Axis Mill / Turn Center with a true linear "Y"-Axis 
  Dual 16-Station Live Tool Turrets with 32-Driven Tool Stations
  Finished Parts Pick-Off Unit with Parts Conveyor, Barloader Interface
  Headwall air blast and coolant outlets for main, subspindle & thru turret
  Dual 4-amp coolant pumps with coolant flow sensor monitoring for driven tool

  turrets
  Dual coolant pumps for external coolant, chip flushing and chip washdown 
  Dead-Length collet chuck on Main & Sub

  for each spindle
  Chip Conveyor (42" Barrel height with air-curtain lean-off)
  BMT-65 Toolholders 


Approximately 25-STATIC BMT-65 TOOLHOLDERS INCLUDED WITH EACH MACHINE

Available: list of tool holders in the machine turrets that are extra to the

ones in the picture on the table:
13 pcs. 1-1/4 ID tool holders
14 pcs. OD tool holders
 4 Radial Live Tools
 4 Axial Live Tools
11 Metric tool holders

Bar loader has a 2'' pusher with 6 collets
1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-9/16, 1-3/4


================

OEM Specifications

CAPACITY
Turning diameter:                    7.48" (190mm) maximum,6.7" (170mm)

Turning length/Center distance:      15.75" (400mm)/36.22" (920mm) between

                                     Centers

MAIN SPINDLE / SUBSPINDLE
Spindle nose / Bearing Diameter:     A2-5
Spindle Bar Capacity:                2.0" (51mm)
Chuck Size:                          6"
Spindle Center Height:               46.45" (1,180mm)
Maximum spindle speed:               6,000 RPM Integral (4,000 RPM Hi Torque)

Spindle motor horsepower:            20 HP Peak, 15 HP (30 Min. Duty Rating)

LIVE TOOL TURRETS
Number of turret stations:           32
Index time 
(adjacent tool/180 Deg. Index):      0.2 Seconds/1.2 Seconds High Speed
Live Tool Power / RPM:               7 HP/ 6,000 RPM, 14.75 ft lbs. (20Nm)
Tool Size:                           25mm (for square tool and round tool)

Collet Size:                         ER-32 Tool Holder Type & Size:BMT-65

Base Mount Tooling
Turret Thru-The-Tool-Coolant:        Rated to 1,000 PSI for High Pressure Cool 
"Y" AXIS
Y axis travel:                       2.75" of travel-1.378" off of Y Axis Y

axis Rapid Feed Rate:                236 IPM (6m per minute)

"C" AXIS
Spindle Radial Resolution:           360,000 Radial Positions w/ Contouring

"B" AXIS (sub spindle travel)
Distance Between Spindles:           36" (914mm)
B Axis Rapid Traverse Rate:          1,573 IPM (40m per minute)
B Axis Travel:                       25.59" (650mm)

AXIS SPECIFICATIONS
Axis Travel-X1, X2- Axis:            5.9" (150mm)/9.05" (230mm)
Axis Travel-Z1, Z2- Axis:            17.32" (440mm)/17.32 (440mm)
Rapid Travers Rate-X1, X2 -Axis:     630 IPM (16m/minute)
Rapid Travers Rate-Z1, Z2 - Axis:    1,574 IPM (40m/minute)
Minimum Programmable Input:          0.0001" (0.001mm = 40 millionths inch)

FLUID CAPACITY
Hydraulic System:                    10.5 Gal. (40 Liters)/3 HP (2.2kw) Motor
Coolant Pumps - Dual Coolant Pumps:  (2) 1.7 HP Pumps for Tooling/Chip Flush
Coolant Tank:                        70 Gallon (280 Liters)
Machine Weight:                      22,751 lbs (10,320 kg)
Electrical Requirement:              49.5 KVA (220VAC +5%, 3 Phase,60hz,131amp
Air Requirement:                     85 PSI @ 8-cfm for parts catcher, ejector
Machine Dimensions:                  165" x 88" x 84"

MACHINE OPTIONS


Automatic operator door - installed (pneumatic control):          $6,995.00
6" Hydraulic Chuck:                                               $2,995.00
Renishaw Tool Setter - Plug-in style Tool Setter - installed:     $7,995.00
Voltage Stabilizers & Transformers (Specify voltage):             P.O.R
FIRETRACE Fire suppression system - installed:                    $7,495.00
  See Fire Waiver in Ganesh Terms and Conditions
Mistbuster-850 Mist Oil Filtration System 
Coolant oil chiller unit - (36,000 BTU's) to control coolant 
MP-Systems High Pressure Coolant System 

Additional tooling & accessories available .... PRICE ON REQUEST

Rigging, shipping, installation and training quoted separatley


Service and Parts available from Exspand Machinery, Chatsworth Ca



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page