1 1/4" TSUGAMI BO326II, Fanuc 31iTB, 2013, w/ Chuck Kit, HPC, Mist Clltr, BF   Our stock number: 392710

1 1/4 TSUGAMI BO326II, Fanuc 31iTB, 2013, w/ Chuck Kit, HPC, Mist Clltr, BF

Click on picture below for larger version
1 1/4 TSUGAMI BO326II, Fanuc 31iTB, 2013, w/ Chuck Kit, HPC, Mist Clltr, BF1 1/4 TSUGAMI BO326II, Fanuc 31iTB, 2013, w/ Chuck Kit, HPC, Mist Clltr, BF1 1/4 TSUGAMI BO326II, Fanuc 31iTB, 2013, w/ Chuck Kit, HPC, Mist Clltr, BF1 1/4 TSUGAMI BO326II, Fanuc 31iTB, 2013, w/ Chuck Kit, HPC, Mist Clltr, BF
1 1/4 TSUGAMI BO326II, Fanuc 31iTB, 2013, w/ Chuck Kit, HPC, Mist Clltr, BF1 1/4 TSUGAMI BO326II, Fanuc 31iTB, 2013, w/ Chuck Kit, HPC, Mist Clltr, BF1 1/4 TSUGAMI BO326II, Fanuc 31iTB, 2013, w/ Chuck Kit, HPC, Mist Clltr, BF1 1/4 TSUGAMI BO326II, Fanuc 31iTB, 2013, w/ Chuck Kit, HPC, Mist Clltr, BF


Includes Chucker Kit & Guide Bushing units


Equipped with (all detail must be confirmed by the buyer):
    Fanuc 32iTB Dual Path Control
    Edge Patriot Magazine Bar Feed
       w/ 2 channel sets, 33mm & 17mm
       & long stroke mode for chucker kit
    Chucker Kit (3291-Y251) 
    Parts Chute
    Parts Conveyor
    MP Systems 8-line High pressure Coolant System (V2-HO8)
    TriMist 850 Mist Collection System
    Turbo Chip Conveyor, 42" discharge height, Part# 4475-8554
    (1) 3290-Y010 Rotary Driven Tool (beside the sub spindle)
    

Original Cost: apprx $270,000 for this machine

Approx 27000 Power on Hours
       14150 Run Time Hours
        7942 Cutting Time Hours


=================

General Machine Specifications per Manufacturer's Brochure

Number of Axes:                            8 (X1,Y1,Z1,C1,X2,Y2,Z2,C2)

Chucking Barstock Diameter:                8 - 32mm  (0.31 - 1.25")
Max Machining Length:                      320 mm (12.59")
                                             (w// direct Drive Rotary GB)
Max Drilling Diameter:                     12 mm (.47")
Max Tapping Diameter:                      M10
Max Back Spindle Chucking Diameter;        32mm (1.25")
Max Back Spindle Drilling Diameter:        10mm (.39")
Max Back Spindle Tapping Diameter:         M8
Max Tool Spindle Drilling Diameter:        8mm (.31")
Max Tool Spindle Tapping Diameter:         M6
Max Tool Spindle Slotting Diameter:        45mm (1.77")
Main Spindle Speed:                        200 - 8000 rpm
Back Spindle Speed:                        200 - 8000 rpm
Rapid Traverse Rate:                      =32 m/min (X1,Y1,Y2 24 m/min)

Tool Storage Capacity (std/max):           31/43
Stick Tool Size:                           16 x 16 x 100mm
Tooling Configuration:
    Live Cross Drills:                     7
    OD Turning Tools:                      7
    ID Tools (by sub spindle:              2
    ID/BW Tools:                           5
    BW Tools:                              4 Live + 4 Fixed

Main Spindle:                              3.7 / 5.5 kW
Back Spindle:                              2.2 / 3.7 kW
Tool Spindle:                              1.0 kW
Rotary Guide Bushing:                      1.5 / 3.0 kW
X1, Y2:                                    0.5 kW
Y1, Z1, X2, Z2:                            0.75 kW
Coolant Pump:                              400 W
Lubricating Pump:                          3 W

Power Requirements:                        21.4 KVA
Air Requirements:                          0.4 MPa or Above
Air Discharge rate:                        40 NL/min
Coolant Tank Capacity:                     180 L (47.5 gal)


Machine:  106" x 59" x 80" 7,500 lbs
Conveyor:  97" x 27" x 80" 800 lbs
High Pressure Coolant:  44" x 24" x 38" 750 lbs
Mist Collector:  48" x 48" x 24" 300 lbs
Barfeed: 170" x 25" x 51", 2500 lbs



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page