To the best of our knowledge all details listed below are deemed correct. It is the buyer's responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase. Equipped With: Fanuc 32iB CNC Control 10.4" Color TFT C-Axis Live Tooling on Main & Counter Spindles 28 Tool Positions (4) Live Tools for Slide 1 (4) Live Tools for Slide 2 Y-Axis on Slide 1 & 2 (6) Turning Holders 16 x 16mm on Slide 1 (4+4) Frontal Tool Holders 25mm for Slide 1 (4) Driven Tools on Slide 1 for ESX 20 Collet (4) Tool Holders 25mm for Slide Y2 (4) Axial Driven Tools on Slide Y2 for ESX 20 Collet (2) Fixed Positions 25mm Beside the Counter Spindle Pneumatic Ejector with Workpiece Unloading Check Device Pneumatic Cleaning System for Counter Spindle Collet Angular Synchronism Between Main & Counter Spindle Rigid Tapping for Spindles & Driven Tools Helical Interpolation Changing Kit from Steady to Sliding Headstock Belt-Type Chip Conveyor (Side Exit) Mit for Machining with Soluble Water Coolant 4 Colors DMG Patrol Light Iemca Boss 338 HD Superfast 12 ft. Magazine Barfeed Mist Collector --------- Note: Oil/water and swiss vs chucker mode DMG Sprints are designed to run Water soluble or Oil as they have sealed ballscrews & bearings. DMG Sprints can run in a Swiss mode with the guide bushings or in a chucker mode without a guide bushing. General Specifications: Clearance Turning Diameter: 1.3" Turning Length: 23.6" Bar Diameter: 1.3" Axes Number of Axes: 8 Number of Linear Axes: 6 Number of Y-Axes: 2 Number of C-Axes: 2 Main Spindle Spindle Speed: 8,500 RPM Output: 7.4 HP Torque: 29.5 ft./lbs Sub Spindle Spindle Speed: 8,500 RPM Output: 3 HP Torque: 10.3 ft./lbs Tool Carrier Number of Tool Carriers: 3 Number of Tool Pockets: 28 Driven Tool Speed: 6,000 RPM Output: 1.3 HP Torque: 2.2 ft./lbs Cutting Hours: 1,175 Machine Weight: 7,826 lbs Space Needed for Machine: 30.1 Sq. Ft.
to complete inventory display
to our home page