27.95"X, 17.71"Y, 18.11"Z, Ganesh Genmill 2818, "New", 2018   Our stock number: 403963

27.95 X, 17.71 Y, 18.11 Z, Ganesh Genmill 2818, New , 2018

To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.

Option: These new machines are being sold as-is with pre-installation checkout
in Chatsworth, Califonia. Parts Warranty Only Starting at: $10,000.00

Equipped With:
   12,000 RPM Direct-Drive Beltless Spindle
   "Big-Plus" Dual-Contact High Performance Precision Spindle
   24-Tool High Speed Twin Arm Tool Changer
   32-GB Solid State Data Server Intergral to CNC Control
   Chip Wash Down Coolant System 
   300 PSI (20-Bar) "Through-the-Spindle" Coolant System
   Full Machine Enclosure with Top Covers (precut for exhaust duct)
   Spindle Air Blast by M-Code
   Spindle Oil Cooler - Thermostatically controlled
   Remote Operator MPG Hand wheel
   High Speed Synchronous Rigid Tapping
   Dual LED High-Intensity Worklamps
   6-Thru-Tool-Coolant Pull Studs
   4th & 5th Axis Prewired with a Quick-Disconnect Connectors

Axis Travel
   X-Axis:                                27.95"         710mm
   Y-Axis:                                17.71"         450mm
   Z-Axis:                                18.11"         460mm
   Spindle to Rotary Table Surface:       5.11-23.62"    150-600mm
   Spindle Center to Z Way Covers:        17.71"         450mm (Troat)

   Table Size:                            29.92" x 16.53"760mmx420mm
   T-Slot Width (3 T-Slots Total):        18mm           100mm Centers
   Table Load:                            2205 lbs       1000 kgs load

   Spindle Motor:                         20 HP S3 Power 15HP 30-Min

   Spindle Speed:                         12,000 RPM

   Tool Type:                             CAT #40 Taper

   Retention System/Holding Capability    BellVille Spring Stack (1650-1760 lbs)
   Spindle Runout:                        <0.000040" TIR
   Spindle Bearings - Rear:               95mm NSK70BNR  2-P4 Class 7 Bearing
   Spindle Bearings - Front:              95mm NSK70BNR  2-P4 Class 7 Bearing
   Retention Knob:                        C40-4502H (Coolant)

Axis Feeds
   Rapid Traverse (X,Y,Z):                1,417 IPM      36m/minute
   Cutting Feedrate:                      0.02-393 IPM   10m/minute
   Axis Drive Motor Power (X,Y/Z):        2.7/4.0 HP     2.0/3.0kw
   Ballscrews (X,Y,Z):                    32mm Ballscrews12mm Pitch
   Least Input Command Increment:         0.0001"/0.000040"0.001mm(40 Millionth)
   Accuracy X,Y,Z Axis (JIS6338):         +0.0002"/12"   +0.005mm Over 300mm
   Repeatability X,Y,Z Axis (JIS6338):    +0.0001"/12"   +0.003mm Over 300mm

Tool Changer
   Tool Capacity (24+1):                  24 Tool Twin ArmChain Drive Rack
   Tool Shank:                            CAT#40 Taper

   Tool Change Time:                      1.7 Seconds Tool to Tool
   Tool Diameter / w/adjacent tool:       5.90" / 3.15"  150mm/80mm
   Tool Length/Weight (from gage line):   11.81" / 15 lbs300mm/7Kg
   Tool Selection/Tool Access             Random         Bi Direction: 

   Coolant Capacity:                      68-Gallons     256 Liters
   Electrical - Connected Load:           50 amps        220vac+5%, 60hz
   Air Service Requirements:              85 PSI @ 14-scfm
   Machine Dimensions:                    86" x 81" x 113"218x186x288cm
   Machine Weight:                        10,582 lbs     4,800 kg

*Machine Options*

Factory machine installation: "Peace-of-Mind Factory Installation" - Includes

Expenses:                                                POR

Factory On-Site 3-Day Machine Operation and Program Training - Includes

Expenses:                                                POR

Belt Type Chip Conveyor w/ 38" Barrel Height Discharge:  POR

15,000 RPM Spindle Speed Upgrade:                        POR

24,000-rpm HSK-63 Integral Spindle 
w/ Ceramic Bearings & Spindle Chiller:                   POR

Second-Year Machine Warranty:                            POR

Voltage Stabilizers/Transformers 
(specify voltage needs):                                 POR

1,000 PSI Through-The-Spindle Coolant Upgrade:           POR

Heidenhain Linear Scales for All 3-Axis - Installed:     POR

Get a Quote

City St ZIP:

How did you hear of us?
Additional information on your request:

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page