24.01"X, 15.75"Y, 17.72"Z, Ganesh Genmill 2416, 2019, "New" 12,000 RPM, Mits 830   Our stock number: 403955

24.01 X, 15.75 Y, 17.72 Z, Ganesh Genmill 2416, 2019, New 12,000 RPM, Mits 830

To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.

Option: These new machines are being sold as-is with pre-installation
checkout in Chatsworth, Califonia. Parts Warranty Only Starting at: $10,000.00

Equipped With:
   12,000 RPM Direct-Drive Beltless Spindle
   "Big-Plus" Dual-Contact High Performance Precision Spindle
   24-Tool High Speed Twin Arm Tool Changer
   32-GB Solid State Data Server Intergral to CNC Control
   Chip Wash Down Coolant System 
   300 PSI (20-Bar) "Through-the-Spindle" Coolant System
   Full Machine Enclosure with Top Covers (precut for exhaust duct)
   Spindle Air Blast by M-Code
   Spindle Oil Cooler - Thermostatically controlled
   Remote Operator MPG Hand wheel
   High Speed Synchronous Rigid Tapping
   Dual LED High-Intensity Worklamps
   32GB Solid State Data Server
   6-Thru-Tool-Coolant Pull Studs

General Specifications:
Axis Travel
   X-Axis:                                24.01"         610mm
   Y-Axis:                                15.75"         400mm
   Z-Axis:                                17.72"         450mm
   Spindle to Rotary Table Surface:       5.11-22.83"    130-580mm
   Spindle Center to Z Way Covers:        15.35"         390mm (Troat)

Table
   Table Size:                            25.59" x 15.75"650mmx400mm
   T-Slot Width (3 T-Slots Total):        18mm           100mm Centers
   Table Load:                            882 lbs        400 kgs load

Spindle
   Spindle Motor:                         15 HP S3 Power 10HP 30-Min

   Spindle Speed:                         12,000 RPM
   Tool Type:                             CAT #40 Taper
   Retention System/Holding Capability    BellVille Spring Stack (1650-1760 lbs)
   Spindle Runout:                        <0.000040" TIR
   Spindle Bearings - Rear:               95mm NSK70BNR  2-P4 Class 7 Bearing
   Spindle Bearings - Front:              95mm NSK70BNR  2-P4 Class 7 Bearing
   Retention Knob:                        C40-4502H (Coolant)

Axis Feeds
   Rapid Traverse (X,Y):                  1,417 IPM      36m/minute
   Rapid Traverse (Z):                    1,260 IPM      32m/minute
   Cutting Feedrate:                      0.02-393 IPM   10m/minute
   Axis Drive Motor Power (X,Y/Z):        2.7/3.35 HP    2.0/2.5kw
   Ballscrews (X,Y,Z):                    32mm Ballscrews12mm Pitch
   Linear Ways (X,Y,Z):                   30/35/35mm
   Least Input Command Increment:         0.0001"/0.000040"0.001mm(40 Millionth)
   Accuracy X,Y,Z Axis (JIS6338):         +0.0002"/12"   +0.005mm Over 300mm
   Repeatability X,Y,Z Axis (JIS6338):    +0.0001"/12"   +0.003mm Over 300mm

Tool Changer
   Tool Capacity (24+1):                  24 Tool Twin ArmChain Drive Rack
   Tool Shank:                            CAT#40 Taper
   Tool Change Time:                      1.7 Seconds Tool to Tool
   Tool Diameter / w/adjacent tool:       5.90" / 3.15"  150mm/80mm
   Tool Length/Weight (from gage line):   11.81" / 15 lbs300mm/7Kg
   Tool Selection/Tool Access             Random         Bi Direction: 

General
   Coolant Capacity:                      68-Gallons     256 Liters
   Electrical - Connected Load:           50 amps        220vac+5%, 60hz
   Air Service Requirements:              85 PSI @ 14-scfm
   Machine Dimensions:                    87" x 73" x 113"218x186x288cm
   Machine Weight:                        9,923 lbs      4,500 kg


*Machine Options*

Factory machine installation: "Peace-of-Mind Factory Installation" - Includes

Expenses:                                                POR


Factory On-Site 3-Day Machine Operation and Program Training - Includes

Expenses:                                                POR

Belt Type Chip Conveyor w/ 38" Barrel Height Discharge:  POR


15,000 RPM Spindle Speed Upgrade:                        POR

24,000-rpm HSK-63 Integral Spindle 
w/ Ceramic Bearings & Spindle Chiller:    POR 

Second-Year Machine Warranty:                            POR

Voltage Stabilizers/Transformers 
(specify voltage needs):                                 POR

1,000 PSI Through-The-Spindle Coolant Upgrade:           POR




Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page