3/4", Ganesh SL-20Y2, 2018, Mits 830, Dbl Y-axis, Sub-Spindle, Only 430 HRS   Our stock number: 403800

3/4 , Ganesh SL-20Y2, 2018, Mits 830, Dbl Y-axis, Sub-Spindle, Only 430 HRS

Click on picture below for larger version
3/4 , Ganesh SL-20Y2, 2018, Mits 830, Dbl Y-axis, Sub-Spindle, Only 430 HRS3/4 , Ganesh SL-20Y2, 2018, Mits 830, Dbl Y-axis, Sub-Spindle, Only 430 HRS3/4 , Ganesh SL-20Y2, 2018, Mits 830, Dbl Y-axis, Sub-Spindle, Only 430 HRS3/4 , Ganesh SL-20Y2, 2018, Mits 830, Dbl Y-axis, Sub-Spindle, Only 430 HRS
3/4 , Ganesh SL-20Y2, 2018, Mits 830, Dbl Y-axis, Sub-Spindle, Only 430 HRS3/4 , Ganesh SL-20Y2, 2018, Mits 830, Dbl Y-axis, Sub-Spindle, Only 430 HRS3/4 , Ganesh SL-20Y2, 2018, Mits 830, Dbl Y-axis, Sub-Spindle, Only 430 HRS3/4 , Ganesh SL-20Y2, 2018, Mits 830, Dbl Y-axis, Sub-Spindle, Only 430 HRS

To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.

         ==========================================================


KE-NEW CONDITON.
8 FOR $189,500.00
AND ONLY RAN ONLY PLASTIC

       ================================================================


Equipped With:
   FMB MicroMag 20 Magazine Bar Loader, 12ft bar cap, s/n 28-0531R1617500
     Walking beam bar separation system - drops out of the way when running
       larger diameter bars
     Complete with 2-Guide Channels (10mm & 20mm)
     Axial Shift option
   MP Systems High Pressure Coolant System, s/n NC08-30-1P-0T-150-CVPV 
   Harbor  HJ-750PSA2 Coolant Chiller s/n LC321457
   TriMist Mist Collector
   Parts Conveyor
   Chip Conveyor
   Air Blast
   Synchronous Rotary Guide-Bushing Holder 
   Non-Guide Bushing Holder (Chucker Kit)
   Parts catcher 
   Parts conveyor w/ output ramp & collection bin Cutoff confirmation sweep-

arm switch 
   Sub-spindle programmable air blast and finished parts ejector
   High-Performance "C"-Axis on both the main and sub spindle 
   Rigid Synchronous Tapping
   Manifold for 4-High Pressure Oil Ports
   Cutting oil chiller system - 18K BTU's (For Machine Thermal Stabalization) 
   Coolant flow confirmation monitoring switch w/ fault interrupt interface 
   8-live-tool ER-16 collet spindles (3-not mounted)
   3-Postion Z-axis (Live Face) Tool
   Collets, TF-25: 3/8", 7/16", 1/2" 
   Guide Bushings, TD25S: 3/8", 7/16"  
   (4) Foot pads
   Manuals: Ganesh Operations, Parts, Electrical, Mitsubishi M800/M80
   Tool Box

** Machine is like New 
** Ran only delron 
   On-time ONLY 430 hours

=======================================

GENERAL SPECIFICATIONS:
Main Spindle:
   Spindle Speed/Bearing:                 10,000 RPM/5-Bearing Spindle
   Spindle Motor:                         5 HP
   Collet Style for Main/Sub Spindle:     Hardinge TF-25S/ S&M TS-25
   Synchronous Rotary Guide Bushing:      TD25S
   Barstock Diameter:                     23mm (3/4")
   Distance Between Spindles:             23.6" (600mm)
   Spindle Centerline Height:             42" (1060mm)

Main Spindle Tooling:
   OD Turning Tool Holders:               6 - 12mm
   ID Internal Tool Holders:              4 - 22mm
   ID Deep Hole Drill Positions:          2 - 22mm
   Cross Slide Live Tools:                5 - ER16 (8,000 RPM)
   Drilling/Tapping Capacity:             10mm Drilling / M8 Tap
   Cross Drilling/Tapping Capacity:       8mm Drilling / M6 Tap

Sub-Spindle:
   Spindle Speed/Bearings:                8,000 RPM / 4-Bearing Spindle
   Sub-Spindle Motor:                     5 HP
   Collet Style for Main/Sub Spindle:    =Hardinge TF-25S/ S&M TS-25
   Barstock Diameter:                     23mm (3/4")
   Workpiece Length for Front Ejection:   110mm

Sub-Spindle Tooling:
   OD Turning Tool Holders:               3 - 10mm
   ID Internal Tool Holders:              4 - 22mm
   ID Internal Tool Holders:              3 - ER-16 Fixed Tools (3/8")
   Sub Spindle Axiel Live Tools:          3 - RE-16 Live Tools (4,000 RPM)
   Backworking Machining Length:          6.1" Turning Length / 3.14" Boring
   Drilling/Tapping Capacity:             10mm Drilling / M8 Tapping
   Cross Drilling/Tapping Capacity:       8mm Drilling / M6 Tapping

Axes:
   Main Spindle Stroke:                   9.840" Single Stroke (250mm)
   Turning Length (Rotary Bushing):       7.48 (190mm)
   Turning Length (Without Bushing):      2.36" (60mm)
   X1, Y1, Z1, X2, Y2, Z2 Rapids:         944 IPM (24m/minute)
   X1, Y1, Z1 Axis Motor Power:           1 HP
   X2, Y2, Z2 Axis Motor Power:           .67 HP
   Minimum Input Unit:                    0.0001"

Power:                                    220 Volts/3 Phase/ 60hz/ 60 Amps

Sold As-Is, with a start-up warranty, FCA Colorado


Machine:  120" x 60" x 84" 6,000 lbs
Barfeed:  230" x 32" x 54" 2,500 lbs
Chip Conveyor:  94" x 22" x 38" 1,500 lbs
Chip Pan 1:  55" x 48" x 13" 150 lbs
Chip Pan 2:  49" x 37" x 19" 180 lbs
HPC:  46" x 24" x 46" 500 lbs
Mist Buster:  30" x 28" x 24" 225 lbs
Oil Chiller:  27" x 23" x 59" 300 lbs
Chip Cart:  39" x 22" x 33" 190 lbs



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page