GANESH, Cyclone 32GT, FANUC 0iTC, 1 1/4", 2006, 8-Station Turret   Our stock number: 403749

GANESH, Cyclone 32GT, FANUC 0iTC, 1 1/4 , 2006, 8-Station Turret

Click on picture below for larger version
GANESH, Cyclone 32GT, FANUC 0iTC, 1 1/4 , 2006, 8-Station TurretGANESH, Cyclone 32GT, FANUC 0iTC, 1 1/4 , 2006, 8-Station TurretGANESH, Cyclone 32GT, FANUC 0iTC, 1 1/4 , 2006, 8-Station Turret
GANESH, Cyclone 32GT, FANUC 0iTC, 1 1/4 , 2006, 8-Station TurretGANESH, Cyclone 32GT, FANUC 0iTC, 1 1/4 , 2006, 8-Station Turret

To the best of our knowledge all details listed below are deemed correct. 
It is the buyer's responsibility to confirmed prior to purchase.


Equipped with
    8-Station Turret
    16C Collet Nose
    Part Catcher
    Tool Holders Included:
     (2) Single Drill Sleeve 
     (1) Double ID 
     (4) Boring Bar ID for turret
     Misc drill chucks
    Door Interlock
    Tool Box/wrenches


General Specifications per manufacturer's brochure

AXIS TRAVEL

X-Travel                               8.46" (215mm)
Z-Travel                               5.98" (152mm)
Maximum Turning Diameter / Length      7.87" / 5.5" (200mm / 140mm)
Swing over Bedways                     12.59" (320mm)

AXIS FEEDS
Rapid Traverse - X, Z                  787 ipm (20/20m / min)
Rated Cutting Feedrate                 236 ipm (6/6m / min)
Mechanical Way System - X/Z            Box Ways 
                                       Turcite coated & pressure lubricated
Slant Bed Angle                        20 deg Slant Bed Angle for tooling
Axis Drive Motor Power - X-axis        1.0-HP (.75 kw)
Axis Drive Motor Power - Z-axis        1-1/3-HP (1.0 kw)
Ballscrew Diameter - X, Z              32mm
Positioning Accuracy - X/Z             0.00015"  (0.004mm)
Positioning Repeatability - X/Z        0.00008"  (0.002mm)
Least Input Command Increment          0.0001" / 0.000040" 
                                       0.001mm / (40-millionths in metric)
SPINDLE
Spindle Nose Mount                     A2-5
Spindle Speed                          6,000
Maximum Tapping Spindle Speed          2,000 rpm
Maximum Bar Capacity                   1-1/4" (32mm)
Spindle Bore                           34mm
Spindle Bearing - inside diameter      70mm (80mm optional)
Spindle Motor Power -                  3.7/5.5kw (7.5-HP 5.5kw) 
                                       (10-HP 7.5kw spindle motor optional)
Spindle Motor Torque                   26 ft. lbs. 35Nm
Spindle Motor Drive Coupling           Belt Drive
Spindle Runout                         0.000040" T.I.R.

TOOLING PLATE & TOOL SYSTEM
Tool Plate Overall Dimensions          8.66" x 36.45" (220mm x 706mm)
Tool Plate T-Slot Dimensions           21mm base & 12mm neck width, 
                                       (8mm base height /17mm total)
T-Slots                                3 T-Slots on 63mm centers 
Turning Tool Shank Size                20mm (3/4") square shank
Internal Tool Shank Size 32mm 1-1/4"   (25mm for optional tool turret bores)
Optional Driven Tool HP (.75kw)        1-Horsepower with 2:1 speed reduction

                                       for increased torque
Optional Drvn Tool Collet Size (1/2")  2-ER20 collets in a hydraulic

                                       positioned upper/lower format

SPECIFICATIONS
Air Service Requirements               85 psi @ 5-scfm 5.5 Kg/cm2
Electrical Requirements - 
    connected load                     10kva, 28-Amps 220vac  5%, 60-Hz
Coolant Tank Capacity / Motor Power    21-gallons / 1/2-HP 
                                       (80-liters / 2-amps)
Lubrication Pump                       150 watts
Hydraulic Pump Motor / Pressure        1-HP / 500 PSI (.75 kw / 32-bar)
Floor space requirements (W x D x H)   81" x 64" x 64" 
                                       282x135x183cm 
                                       (+ chip conveyor)
Machine Weight 4,850 pounds 2,200 kg

Machine:  65" x 61" x 67" 4,850 lbs
Chip/Coolant Pan:  44"x 26" x 20" 170 lbs



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page