OKUMA LB3000EXII, OSP300, 10"Chk, 2 1/4", 2013, HP, Live Tools,   Our stock number: 403684

OKUMA LB3000EXII, OSP300, 10 Chk, 2 1/4 , 2013, HP, Live Tools,

Click on picture below for larger version
OKUMA LB3000EXII, OSP300, 10 Chk, 2 1/4 , 2013, HP, Live Tools,OKUMA LB3000EXII, OSP300, 10 Chk, 2 1/4 , 2013, HP, Live Tools,OKUMA LB3000EXII, OSP300, 10 Chk, 2 1/4 , 2013, HP, Live Tools,OKUMA LB3000EXII, OSP300, 10 Chk, 2 1/4 , 2013, HP, Live Tools,
OKUMA LB3000EXII, OSP300, 10 Chk, 2 1/4 , 2013, HP, Live Tools,OKUMA LB3000EXII, OSP300, 10 Chk, 2 1/4 , 2013, HP, Live Tools,OKUMA LB3000EXII, OSP300, 10 Chk, 2 1/4 , 2013, HP, Live Tools,OKUMA LB3000EXII, OSP300, 10 Chk, 2 1/4 , 2013, HP, Live Tools,

To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.

Equipped With:
***Machine was blocked with factory brackets and Disconnected by Gosiger***
  OSP 300 Touchscreen control 
  MP Systems High pressure coolant System 1000 P.S.I. & surface skimmer (7.5 HP
  MAYFRAN Chip conveyor & coolant tank with (2) Coolant pumps 
  10" 3 jaw KITAGAWA #BB210 chuck on main spindle 
  6.5" 3 jaw KITAGAWA chuck on sub spindle 
  (2) Live tool holders 
  (2) Standard tool holders 
  (7) Spindle liners 
  MARPOSS tool setter 
  Dual foot pedals 
  Work light
  Machine cutting hours- 3,048 
  Machine manuals, Schematics, back up disks 
  Factory shipping & lifting brackets 
  Main spindle motor 40/30 H.P. 
  Z axis motor 6.13 H.P.
  X axis motor 4.67 H.P. 
  Y axis motor 4.67 H.P. 
  Sub spindle motor 3.73 H.P. 
  Hydraulic pump motor 3 H.P.
  Guideway lubrication pump motor .024 H.P. 
  Machine is currently wired for 480 Volt / 3 Phase / 60 HZ
  Machine weight- 19,500 Lbs. 
  Machine dimensions- 170'' L x 96'' L x 98'' H
Control options-
  3D animation
  animation
  Pitch error compensation
  96 tool offsets
  tool wear compensation
  NC work counter
  MAC man
  Plane conversation
  Profile generator
  Synchro tapping
  Helical cutting
  Spindle orientation
  M Axis orientation

Specifications:
Swing over bed- 22.83" 
Swing over carriage- 18.50" 
Maximum turning diameter- 13.39"
Distance between centers- 42.72"
Main spindle-
Spindle diameter- 4.72" 
Spindle nose- A2-6
Through spindle hole- 3.14"
Spindle speeds- 45 - 5,000 R.P.M. 
Sub spindle- 
Spindle diameter- 3.94"
 Spindle nose type- 5.51" flat 
Through spindle hole- 2.44" 
Spindle speeds- 45 - 6,000 R.P.M.
Z axis travel- 39.76"
Feedrate- 0.00004 to 39.37008 I.P.M. 
Rapid feedrate- 1,181.10 I.P.M. 
X axis travel- 10.24"
Feedrate- 0.00004 to 39.37008 I.P.M. 
Rapid feedrate- 984.25 I.P.M. 
Y axis travel- 4.53"
Feedrate- 0.00004 to 39.37008 I.P.M. 
Rapid feedrate- 492.13 I.P.M. 
W axis travel- 35.24"
Feedrate- 0.00004 to 39.37008 I.P.M. 
Rapid feedrate- 1,181.10 I.P.M. 
Turret type- V12
Number of turret stations- 12
Live tooling / milling spindle speeds- 45 to 6,000 R.P.M. 
C axis control angle- 360 / 0.001 increment 
Rapid traverse- 200






Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page