10" x 12", MARVEL PA10/3, automatic, 10" rd, 16" shuttle feed, 5hp, 1-1/4 Blade   Our stock number: 403602

10 x 12 , MARVEL PA10/3, automatic, 10 rd, 16 shuttle feed, 5hp, 1-1/4 Blade

Click on picture below for larger version
10 x 12 , MARVEL PA10/3, automatic, 10 rd, 16 shuttle feed, 5hp, 1-1/4 Blade10 x 12 , MARVEL PA10/3, automatic, 10 rd, 16 shuttle feed, 5hp, 1-1/4 Blade10 x 12 , MARVEL PA10/3, automatic, 10 rd, 16 shuttle feed, 5hp, 1-1/4 Blade

CAPACITY                            10" x 12" Rectangle; 10" Round.
BLADE                               1.25" x .042" x 11' 6".

BLADE TENSION
Hydraulically controlled tension (30,000 psi) provides consistent square

cutting accuracy. Includes a motion detector that will shut the machine off

should the blade break or stall.

SPEED RANGE
70 - 330 SFPM variable through a frequency inverter drive and heavy duty worm

gear transmission. The broad speed range allows for optimum cutting of a large

spectrum of materials.

HYDRAULIC DOWN FEED
Feed rate and down pressure can be controlled independently for fast, accurate

cutting.

HYDRAULIC SHUTTLE FEED
Length settings of 0 - 16" are selected with a hand-wheel and displayed on a

digital counter. The shuttle comes to positive stops at both ends of the

index, assuring cutoff length accuracy. Repeatability is +/- .005 per index. 

Up to 9 cycles are possible using the multi-index system.

MOTORS
Blade Drive: 5 H.P., Hydraulic Pump Motor: 1 H.P., Coolant Pump Motor: 1/8

H.P., Machines are available with either 230 or 460 Volt, 3ph., 60 Hz.

OPERATOR'S CONTROL PANEL
Conveniently mounted on the left hand side of the machine and offers full

control of all machine functions such as; Vises, Blade Speed, Saw Frame,

bundle Clamping, Parts Counter, Shuttle Advance & Retract, Coolant and Work

Light.

PIECE COUNTER
The machine will stop the automatic cycle when the pre-set number of cuts has

been reached.

OUT-OF-STOCK SWITCH
The machine will shut off automatically when material is no longer present in

the rear vise.

BLADE GUIDES
The combination roller bearing and carbide blade guides reduce heat and blade

stress providing longer blade life and accuracies of +/- .002 per inch of cut

material.

FAST APPROACH
Work Height is automatically set allowing the head to rise just enough to

clear the workpiece, reducing the cycle time and allowing for faster cutting

performance.

AUTOMATIC CHIP REMOVAL              
The chip auger rotating in the coolant return removes chips quickly and

efficiently, freeing the operator to perform more productive operations. 

Coolant is allowed to drain back to the tank before the chips are removed from

the machine.

CHIP BRUSH
Powered from the main drive shaft of the saw, the brush changes speed along

with the blade to assure that chips are being removed from each gullet of the

blade, improving cutting performance and blade life.

FULL STROKING HYDRAULIC VISE JAWS
The front vise jaws are split to reduce the remnant to as little as 2". The

split vise jaws also help to reduce burrs left on the material and are ideal

for bundle cutting. Holding the workpiece on both sides of the blade reduces

vibration, providing more accurate cuts and long blade life. Rear Vise: The

rear vise jaw floats hydraulically to accommodate crooked stock assuring

straight, accurate cuts.

WORK LIGHT                          
Positioned directly over the work area to provide better illumination of the

cutting area, the work light can be turned on and off independently from the

operator's control panel.

Machine:  95" x 87" x 53" 3,100 lbs
Conveyor table:  60" x 18" x 25" 165 lbs



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page