27.5"X, 19.6"Y, 22"Z, QUASER MV154 APC-E, 2012, Fanuc 0iMD, 12K RPM, 48ATC   Our stock number: 403577

27.5 X, 19.6 Y, 22 Z, QUASER MV154 APC-E, 2012, Fanuc 0iMD, 12K RPM, 48ATC

Click on picture below for larger version
27.5 X, 19.6 Y, 22 Z, QUASER MV154 APC-E, 2012, Fanuc 0iMD, 12K RPM, 48ATC27.5 X, 19.6 Y, 22 Z, QUASER MV154 APC-E, 2012, Fanuc 0iMD, 12K RPM, 48ATC27.5 X, 19.6 Y, 22 Z, QUASER MV154 APC-E, 2012, Fanuc 0iMD, 12K RPM, 48ATC
27.5 X, 19.6 Y, 22 Z, QUASER MV154 APC-E, 2012, Fanuc 0iMD, 12K RPM, 48ATC27.5 X, 19.6 Y, 22 Z, QUASER MV154 APC-E, 2012, Fanuc 0iMD, 12K RPM, 48ATC27.5 X, 19.6 Y, 22 Z, QUASER MV154 APC-E, 2012, Fanuc 0iMD, 12K RPM, 48ATC


To the best of our knowledge all details listed below are deemed correct.  It

is the Buyer's responsiblity to confirm all details prior to purchase.


This machine is a 2-Pallet Switcher type Vertical Machinig Center

Equipped with (must be verified by buyer):
  Fanuc 0i-MD Control
  20 HP Spindle
  CAT 40 
  12,000 RPM High-Low Spindle Speed
  AC Digital Servo & Spindle Drives
  Spindle Cooler
  HRV Servo Drive Technology
  Fine ACC and DEC Control Function
  AI Contouring Control
  Rigid Tapping & Helical Interpolation Function
  8.4" TFT High Resouution Color LCD Monitor
  PCMCIA Slot For Memory Expansion & Modem
  Remote Manual Pulse Generator
  High Quality Rigid Meehanite Casting
  Fast 48 Tool Swing Arm Type ATC System
  2 Pallet Swing Type APC System
  Coolant Through The Spindle 290 PSI
  Pre-Tensioned Hardened & Ground Ballscrews
  Servo Motors Direct Couple To Ballscrews
  Dual Chip Augers
  40 Block Look Ahead / 1280 Meters Of Memory
  Air Blow Through Spindle / Coolant Gun
  Chip Conveyor
  Saddle Wash Down Coolant System

Basic Specifications:

HEADSTOCK:
  Motor:                                      FANUC AC Digital Spindle 
  Horse Power:                                20 HP / Belt Drive 
  Maximum Spindle Speed:                      12,000 RPM 
  Spindle Center to Pallet Surface:           5.9" - 27.9"

PALLET:
  Size:                                       31.4" x 19.6"
  No. of Pallets:                             2 pallets
  Pallet Indexer:                             180 Degrees
  Max. Work Piece Size:                       31.4" x 19.6" x 14.5"

ATC SYSTEM (FACE AND TAPER CONTACT ON SPINDLE):
  Tool Type:                                  CT-40 (BT-40 option)
  Tool Selection:                             Random Programmable
  Maximum Tool Weight:                        15.4 lbs.
  Maximum Tool Length:                        11.8"
  Maximum Tool Diameter:                      3" (4.9" w/o adjacent tool)
  Magazine Tool Capacity:                     48
  Tool Change Time (Approx.):                 5 sec. (C to C)

AXES SPECIFICATIONS:
  Travel, Rapid Rate, Cutting Feed)
  X Axis  27.5" 1,260 ipm / 787 ipm
  Y Axis  19.6" 1,260 ipm / 787 ipm
  Z Axis  22.0" 1,260 ipm / 787 ipm

GENERAL:
Machine Net Weight(approx):                   18,700 lbs.
Power Consumption:                            25 kVA
Floor Spacing (W x D x H) (approx):           106" x 157" x 118"

Detailed Specifications:

Headstock:
  Spindle Motor:                              Fanuc AC Digital Spindle Motor
  Horsepower:                                 20 HP Spindle
  R.P.M. Range:                               0 - 12,000 rpm High/Low Windings
  Spindle Type:                               CT-40 / Belt Drive
  Spindle Clamping Force:                     2,700 lbs
  Spindle Nose to Table:                      5.9" - 27.9

Automatic Pallet Changer:
  APC Type:                                   Swing Arm type 180 Degree
  Number of Pallets:                          2 pallets 
  Height From floor:                          37"
  Pallet Load:                                550 pounds each

AUTOMATIC TOOL CHANGER:
  Magazine Capacity:                          48 tools 
  Tool Shank:                                 CT-40 
  Tool Selection:                             Random programmable
  Maximum Tool Weight                         15.4 lbs.  
  Maximum Tool Diameter:                      3" / 4.9" (when adjacent pocket
                                                is empty)
  Maximum Tool Length:                        11.8"
  Tool Change Time (Chip to Chip):            5 seconds

X AXIS:
  Feed Rate Rapid Traverse:                   1,260 ipm
  Cutting Feed Rate:                          787 ipm
  Travel:                                     27.5"

Y AXIS:                                       Ball Screw Diameter:1.77"
  Feed Rate Rapid Traverse:                   1,260 ipm
  Cutting Feed Rate:                          787 ipm
  Travel:                                     19.6"

Z AXIS:
  Feed Rate Rapid Traverse:                   1,260 ipm
  Cutting Feed Rate:                          787 ipm
  Travel:                                     22.0"
  Feed Motor:                                 5.4 HP

COOLANT TANK CAPACITY:                        132 GAL
  Spindle Nozzle Coolant:                     43 psi / 16 gal min
  Through Spindle Coolant:                    290 psi / 6.6 gal min
  Ceiling Wash Down:                          16 psi / 26 gal min    

DIMENSIONS:
  Floor Spacing (W x D x H) (approx):         106" x 157" x 118"
  Weight (approx):                            19,700 lbs

POWER REQUIREMENTS:
  Minimum                                     25 kVA



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page