OMAX, No. 80X-2, 2013, 6' x 26', 5-Axis, 60k PSI, Solid Removal,   Our stock number: 403543

OMAX, No. 80X-2, 2013, 6' x 26', 5-Axis, 60k PSI, Solid Removal,

Click on picture below for larger version
OMAX, No. 80X-2, 2013, 6' x 26', 5-Axis, 60k PSI, Solid Removal,OMAX, No. 80X-2, 2013, 6' x 26', 5-Axis, 60k PSI, Solid Removal,OMAX, No. 80X-2, 2013, 6' x 26', 5-Axis, 60k PSI, Solid Removal,OMAX, No. 80X-2, 2013, 6' x 26', 5-Axis, 60k PSI, Solid Removal,

To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.

SPECIFICATIONS:
  Table Size:                         7'5" x 28'3"
  Cutting Capacity:                   6'8" x 26'8"
  Table Support Load:                 400 Lbs Sqr/Ft
  Material Support Slats:             4" x 1/8" Galvanized
  Rapid Traverse Speed:               350" IPM
  Drive System:                       Closed Loop Vector Linear Drive System
  OMAX EnduroMax Pump Horsepower:     50 HP 
  Pump Pressure:                      60,000 PSI
  Nozzle Config:                      0.016"Orifice,0.042"/4"Mixing Tube
  Garnet Feed System:                 Gravity Feed 25 lbs.
  Computer:                           PC Based w/ Monitor,Keyboard,Mouse
  Software:                           Omax Intelli-Max Control Software
  Footprint of Tank:                  340"L x 89"W x 144" H
  Weight:                             13,000 Lbs.
  Operating Weight:                   54,000 Lbs.

CONTROL
  PC Based Controller 
  Windows Operating System
  USB Hub of External Hardware Additions
  Monitor with External Power Supply
  Keyboard
  Mouse
  Network Compatible

SOFTWARE
  OMAX Intelli-MAX Waterjet Designed Software
  CAD/CAM Software Included with Easy to Use Drawing Library
  CAD Formats Supported for Over 50 File Types
  Heads-up Traverse Available
  No G or M Code

DRIVE SYSTEM
  Closed Loop Vector Linear Drive System Designed Specifically for Waterjets by

OMAX
  Electronic Gearing for Precise Cutting Control
  Dual 0.000039" (1 micron) Resolution with Linear Scale Feed Back to Control
  Motorized Z-Axis with Heads Up Traverse

PUMP
  Omax EnduroMax 5060V Variable Frequency Drive High Efficiency Pump
  Variable Frequency Drive from 0 to 60,000 PSI 
  Rated for 85% Efficiency as Opposed to 60%-70% from Intensifier Pump
  Pump Hours Only Accumulate During Cutting - Not idle Time
  For Safety, High Pressure System not Pressurize Except When Cutting
  Rated for 1,000 Hours Between Pump Rebuilds
  Rebuild Pump in as little as 15 Minutes
  Very Low Pump Operating Cost
  Wired 3/60/460 Volt 

EQUIPPED WITH:
  Omax EnduroMax 5060V Variable Frequency Drive High Efficiency Pump
  A-Jet 5-Axis Head Cutting up to 60 Degrees
  OMAX Intelli-MAX CAD/CAM Control & Software
  PC Based Control
  Dual SRS Variable Speed Solids Removal System with 1 Cu/yd Hoppers Each
  Laminar Sediment Filter for Drain
  600 Lbs Abrasive Hopper
  Exclusive Omax Intelli-TRAX Drive System Developed Exclusively for the

Waterjet Environment 
  Parking Area for Carriage for Easy Loading from Front, Side, or Top of Table

Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page