BROTHER HS70AM, 2007 Rebuilt/not used, submerge, 16.1x10.2x6.7",B & U/V axis   Our stock number: 403360

BROTHER HS70AM, 2007 Rebuilt/not used, submerge, 16.1x10.2x6.7 ,B & U/V axis

Click on picture below for larger version
BROTHER HS70AM, 2007 Rebuilt/not used, submerge, 16.1x10.2x6.7 ,B & U/V axisBROTHER HS70AM, 2007 Rebuilt/not used, submerge, 16.1x10.2x6.7 ,B & U/V axisBROTHER HS70AM, 2007 Rebuilt/not used, submerge, 16.1x10.2x6.7 ,B & U/V axisBROTHER HS70AM, 2007 Rebuilt/not used, submerge, 16.1x10.2x6.7 ,B & U/V axis
BROTHER HS70AM, 2007 Rebuilt/not used, submerge, 16.1x10.2x6.7 ,B & U/V axisBROTHER HS70AM, 2007 Rebuilt/not used, submerge, 16.1x10.2x6.7 ,B & U/V axisBROTHER HS70AM, 2007 Rebuilt/not used, submerge, 16.1x10.2x6.7 ,B & U/V axisBROTHER HS70AM, 2007 Rebuilt/not used, submerge, 16.1x10.2x6.7 ,B & U/V axis


To the best of our knowledge all details listed below are deemed correct.
It is the buyer's responsibility to confirm prior to purchase.

Click the link below to view a video demonstration of this machine
https://youtu.be/8liNw9zxhls

Equipped with 
  Dielectri Fluid cooler and filter system
  Auto Threading
  Annealing Treatment
  Submerged Wire Threading
  0.1 m pitch optical linear scale (X,Y)
  Z-axis motor control
  No air required
  770 lbs max workpiece


Main unit
Item                                        inch (mm)
Maximum workpiece dimensions                22.8x15.3x6.7 (580 x 390 x 170)
Maximum workpice weight                     770lbs (350kg)
X and Y axis stroke                         16.1 x 10.2 (4110 x 260)
Z axis stroke                               6.7 (170)
Maximum machining speed                     28inch2/hour (300mm2/min)
Optimum surface roughness                   0.01 inchRa (0.26 mRa)
Maximum table feed speed                    36inchi/min (900 mm/min) 
  positioning                               12inchi/min (300 mm/min) 
  machining Wire diameter                   0.004, 0.006, 0.008, 0.01, 0.012
                                            (0.1, 0.15, 0.2, 0.25, 0.3)
Wire guide system                           Round diamond
Wire feed speed                             1.57 - 9.84inch/sec
                                            (40 - 250mm/sec)
Wire tension                                3 - 25 N
Maximum wire spool                          DIN 160/ P10 (13.5lbs & 10kg)
Wire recovery method                        Mechanical cutting with rotating

                                            blade
Wire recovery bucket capacity               44lbs (20kg)
U and V axis stroke                          1.28 x  1.28 ( 3.25 x  3.25 )
Maximum taper angle                         Sharp corner taper, Cylindrical

                                            taper, Conical taper, Independent
                                            U/V
4 axes programming
Dielectric fluid feed system                Submerged type/ Flushing type
Main unit dimensions                        40.9 x 66.2 x 76.2 
                                            (1040 x 1681 x 1936)
Main unit weight                            3080lbs (1400kg)
Installation area                           86.2 x 99.4 (2190 x 2525)
Including maintenance area
Power supply                                3-phase AC V  10% 50/60Hz  1Hz
Total input                                 13.5kVA
Includes dielectric fluid cooling system

B-axis index table  
Item                                        inch (mm)
Setting unit                                0.00001 deg
Minimum movement unit                       0.00072 deg
Maximum rotation speed                      20 min-1
Load weight                                 18 lbs (8kg)

NC unit
Item                                        inch (mm)
Controllable Axes                           X, Y, Z, U, V, B
Minimum setting unit                        0.0001 (0.001)
Minimum drive unit                          0.000004 (0.0001)
Maximum command value                        999.99999 ( 9999.999)
Interporation functins                      Linear, Arc
Positioning command functions               Relative, Absolute
Input                                       Keyboad, RS-232C, Ethernet
Display                                     12.1" color LCD (SVGA)
Memory                                      1,000,000inch (25,400m)
Number of programs                          1000
Operating modes                             Program, Back, Trace, Jog, Step,
                                            Breakpoint return, Centering,
                                            Edge find, Zero-point return
NC-Functions                                
  Machine lock, Dry run, Single block, Optional stop, Metric/ Inch select,

Stored stroke limit,Subprogram, 2D/3D (surface/ wire-frame) graphics,

Machining time display, Correction of pitch error, Automatic condition

setting, Servo feed & thickness corner control

Dielectric fluid supply tank
Dielectric tank supply                      360 L
Filter system                               2 internal pressure filters
Ion exchanger capacity                      7.5 L
External dimensions                         25.6 x 55.8 x 48.8 
                                            (650 x 1417 x 1240)
Weight (empty)                              473 lbs(215kg)



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page