22"X, 22"Y, 26"Z, DMG MORI NHX 4000 GEN 2 RPP, 2015, 5-Pallert, 15k RPM, 120Tool   Our stock number: 402667

22 X, 22 Y, 26 Z, DMG MORI NHX 4000 GEN 2 RPP, 2015, 5-Pallert, 15k RPM, 120Tool

Click on picture below for larger version
22 X, 22 Y, 26 Z, DMG MORI NHX 4000 GEN 2 RPP, 2015, 5-Pallert, 15k RPM, 120Tool22 X, 22 Y, 26 Z, DMG MORI NHX 4000 GEN 2 RPP, 2015, 5-Pallert, 15k RPM, 120Tool22 X, 22 Y, 26 Z, DMG MORI NHX 4000 GEN 2 RPP, 2015, 5-Pallert, 15k RPM, 120Tool22 X, 22 Y, 26 Z, DMG MORI NHX 4000 GEN 2 RPP, 2015, 5-Pallert, 15k RPM, 120Tool
22 X, 22 Y, 26 Z, DMG MORI NHX 4000 GEN 2 RPP, 2015, 5-Pallert, 15k RPM, 120Tool22 X, 22 Y, 26 Z, DMG MORI NHX 4000 GEN 2 RPP, 2015, 5-Pallert, 15k RPM, 120Tool22 X, 22 Y, 26 Z, DMG MORI NHX 4000 GEN 2 RPP, 2015, 5-Pallert, 15k RPM, 120Tool22 X, 22 Y, 26 Z, DMG MORI NHX 4000 GEN 2 RPP, 2015, 5-Pallert, 15k RPM, 120Tool

To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.

Travel
  X-axis travel:                            22"
  Y-axis travel:                            22"
  Z-axis travel:                            26"
  Between pallet surface to spindle center: 3.1"-25.2"
  T-slot:                                   2.4"-24.4"

Pallet
  Floor surface to pallet surface:          41.3"
  Pallet working surface:                   15.7"x15.7"
  Pallet loading capacity:                  880 lbs.
  Max workpiece swing diameter:             24.8"
  Max workpiece height:                     35.4"
  Minimum pallet indexing angle:            0.001 degree
  Full 4th axis indexing time (90 degrees): 0.8 sec

Spindle
  Max spindle speed:                        15,000
  Number of spindle speed ranges:           1
  Type of spindle taper hole:               CAT 40
  Spindle bearing inner diameter:           3.1"\

Feedrate
  Rapid traverse rate:
  X:                                        2,362.2 ipm
  Y & Z:                                    3,779.5 ipm
  Feedrate mm/min (ipm):                    0-2,362.2 ipm
When using high precision control 
  Job feedrate:                             0-197 ipm

ATC
  Type of tool shank:                       CAT40
  Tool storage capacity:                    Chain-type:120
  Max tool dia.:       2.7"
  Max tool dia.:    5.5"
  Max tool length:                          17.7"
  Max tool mass:                            26.4 lbs
  Tool changing time :        0.9 sec

APC
  Number of pallets:                        5
  Method of pallet change:                  Turn-type
  Pallet changing time:                     8 sec\

Power Sources
  Electrical power supply kVA:  39
  Compressed air supply MPa:                72.5 psi
{when the tool tip air blow is regularly used, air supply of more than 300

L/min (79.2 gpm) is separately required}

Tank Capacity
  Coolant tank capacity:                    211.2 gal

Machine Size
  Approx length x width:                    236 x 132 inches 
Mass of machine :   16,720 lbs approx
                                            21,000 lbs with pallet system
Equipped with:
  Direct scale feedback X, Y, Z
  High performance rear discharge external chip conveyor
  High pressure thru spindle (chip blaster)
  21.5" ErgoLine (celos) control panel with multi touch monitor
  Renishaw CMP60
  Tool probe
  Memory 6GB
  Highspeed mode
  Inverse time options
  (4) tombstones
  Can be inspected under power
  Control:  Mitsubishi CNC M700BM/M700UM series
  All available manuals included



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page