1 1/4", TSUGAMI SS32, FANUC 31I-A, 2008, FMB Mag. Loader, Mist Cllct, CHip Cnvyr   Our stock number: 402443

1 1/4 , TSUGAMI SS32, FANUC 31I-A, 2008, FMB Mag. Loader, Mist Cllct, CHip Cnvyr

Click on picture below for larger version
1 1/4 , TSUGAMI SS32, FANUC 31I-A, 2008, FMB Mag. Loader, Mist Cllct, CHip Cnvyr1 1/4 , TSUGAMI SS32, FANUC 31I-A, 2008, FMB Mag. Loader, Mist Cllct, CHip Cnvyr1 1/4 , TSUGAMI SS32, FANUC 31I-A, 2008, FMB Mag. Loader, Mist Cllct, CHip Cnvyr1 1/4 , TSUGAMI SS32, FANUC 31I-A, 2008, FMB Mag. Loader, Mist Cllct, CHip Cnvyr
1 1/4 , TSUGAMI SS32, FANUC 31I-A, 2008, FMB Mag. Loader, Mist Cllct, CHip Cnvyr1 1/4 , TSUGAMI SS32, FANUC 31I-A, 2008, FMB Mag. Loader, Mist Cllct, CHip Cnvyr1 1/4 , TSUGAMI SS32, FANUC 31I-A, 2008, FMB Mag. Loader, Mist Cllct, CHip Cnvyr1 1/4 , TSUGAMI SS32, FANUC 31I-A, 2008, FMB Mag. Loader, Mist Cllct, CHip Cnvyr

To the best of our knowledge all details listed below are deemed correct. 
It is the buyer's responsibility to confirmed prior to purchase.

Equipped With:

 =FMB Turbo 3-38 Magazine Bar Feed
 =Royal Mist Collector
 =Rear Discharge LNS Turbo Chip Conveyor
 =Parts Conveyor

Ran aluminum.
Single Shift machine

Power On:  approx 26000 hours


All service and PM's done by local Tsugami dealer



General Specifications as per Brochure

  Working Barstock Diameter:                   1.25"
  Max. Workpiece Length:                       12.5"
  Main Spindle Max. Drilling Dia.:             .5"
  Main Spindle Max. Tapping Dia.:              M10
  Back Spindle Max. Barstock Dia.:             1.25"

  Back Spindle Max. Drilling Dia.:             .39"
  Back Spindle Max. Tapping Dia.:              M8
  Tool Spindle Max. Drilling Dia.:             .31"
  Tool Spindle Max. Tapping Dia.:              M6
  Tool Spindle Max. Slotting Dia.:             1.75"
  Main Spindle Speed:                          200-8000 RPM
  Back Spindle Speed:                          200-8000 RPM
  Rotary Guide Bushing Speed:                  200-8000 RPM
  Tool Spindle Speed:                          200-5000 RPM
  Tool Storage Capacity:                       24
  Tool Size:                                   5/8" x 4"
  Rapid Traverse Rates:                        32m/min (Z1,Z2,X2) 24m/min

(X1,Y1,Y2)
  Controlled Axes:                             7 (including C1)
  Spindle Index:                               C1
  Main Spindle Motor:                          3.7/5.5 kW
  Back Spindle Motor:                          1.5/3.7 kW
  Tool Spindle Motor:                          1.0 kW
  Rotary Guide Bushing:                        .55/1.1 kW
  X1,X2,Z1,Z2,Y2 Motor:                        .75 kW
  Coolant Pump:                                .39/.62 kW
  Lubricating Oil Pump:                        3W
  Approx. Weight:                              7500 lbs.
  Approx. Dimensions:                          79" x 66" x 79"
  Power Source Requirement:                    18kVA
  Compressed Air Requirement:                  .4 MPa or Above
  Air Discharge Rate:                          40NL/min

NC Standard Specifications

  Control:                                     Fanuc 31i-A
  Controlled Axes:                             7 (including C1)
  Axis Names:                                  X1,Z1,Y1,X2,Z2,Y2,C1
  Least Input Increment:                       .001mm
  Least Command Increment:                     X1,X2: .0005mm, others .001mm
  Max. Programmable Value:                     +/- 8 Digits
  Interpolation Method:                        Linear/Circular
  Feedrate:                                    1 to 6000mm/min
  Feedrate Override:                           0 tp 150%, 10% Increments
  ABS/INC Command:                             X,Z,Y,C Absolute, U,W,V,H

Incremental
  Tool Offset Value:                           +/- 6 Digits
  Tool Offset Pairs:                           99 Pairs
  LCD/MDI:                                     10.4" Color LCD
  Display Language:                            English
  Part Program Storage Size:                   64 Kbytes
  Registerble Programs:                        63
  Auxiliary Function:                          Main Side: 5 Digits, Sub: 3

Digits


















Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page