30.71"X, 22.05"Y, 22.05"Z, DECKEL-MAHO DMC 60T, 2007, HP Coolant   Our stock number: 402371

30.71 X, 22.05 Y, 22.05 Z, DECKEL-MAHO DMC 60T, 2007, HP Coolant

Click on picture below for larger version
30.71 X, 22.05 Y, 22.05 Z, DECKEL-MAHO DMC 60T, 2007, HP Coolant30.71 X, 22.05 Y, 22.05 Z, DECKEL-MAHO DMC 60T, 2007, HP Coolant30.71 X, 22.05 Y, 22.05 Z, DECKEL-MAHO DMC 60T, 2007, HP Coolant30.71 X, 22.05 Y, 22.05 Z, DECKEL-MAHO DMC 60T, 2007, HP Coolant
30.71 X, 22.05 Y, 22.05 Z, DECKEL-MAHO DMC 60T, 2007, HP Coolant30.71 X, 22.05 Y, 22.05 Z, DECKEL-MAHO DMC 60T, 2007, HP Coolant30.71 X, 22.05 Y, 22.05 Z, DECKEL-MAHO DMC 60T, 2007, HP Coolant30.71 X, 22.05 Y, 22.05 Z, DECKEL-MAHO DMC 60T, 2007, HP Coolant

To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.

Model no. DMC 60T
Serial no. 11430002093
Replacement cost is US$480,000.00. 
EXCELLENT condition, only 11,818 operating hours. 

-Can be seen running in Newmarket, Ontario, CANADA. 

Specifications: 
Made in Pfronten, Germany. 

WORKING RANGE- 
  Traverse range X (longitudinal)             30.71" (780 mm) 
  Traverse range Y (transverse)               22.05" (560 mm) 
  Traverse range Z (vertical)                 22.05" (560 mm) 
  Volume machining area                       245 dm-3 
  Max workpiece dimensions                    23.62"(600mm)diameter
                                              22.64"(575mm)height
                                              882 lbs(400kg) 
  ROTARY PALLET CHANGER WITH INTEGRATED NC ROTARY TABLE (C-AXIS)- 
  Stable compact construction with optimal linkage to guideway (Y-Axis) 
  NC rotary table with direct measuring system 
  Backlash-free preloaded precision spur gear for high rigidity, precision and

high torque, maximum holding momentum in closed loop 
  High rapid feed rate 
  Note this machine is equipped w/the optional 100mm distance T-slot pallets 
  Pallet changer allows setup during production time 
  Rotation range                              360 x 0.001 degree (Full 4th Axis) 
  Clamping Surface                            19.7" x 24.8" (500 mm x 630 mm) 
  Number of Pallets                           2 
  Maximum table load                          880 lbs (400 kg) 
  Centre bush                                 2" (50 mm) diameter 
  Torque 40% duty cycle                       1,807 ft lbs (2,450 Nm) 
  Holding momentum 40%                        1,807 ft lbs (2,450 Nm) 
  Maximum feed                                7,200 degrees per minute 
  Maximum table speed                         30 rpm 
  Positional uncertainty P                    7 arc sec 
  Pallet change time                          Approximately 10 seconds 
  SWIVEL MILLING HEAD WITH PROGRAMMABLE B-AXIS- 
  Integrated 12,000 rpm motor spindle 
  High pressure coolant supply centrally through spindle centre 
  Swivel Range                                150 degrees (-120/+30 degrees) 
(30 degrees past horizontal,horizontal,vertical,30 degrees past vertical) 
150 degree swivel range allows UNDERCUTS and machining at NEGATIVE ANGLES 
due to the swivel range of 30 degrees across the horizontal or vertical

axis.This gives you advanced flexibility for complex parts like impellers. 
Swivel momentum milling spindle (40% duty cycle) 1,620 ft lbs (2,200 Nm) 
Holding momentum without clamping (40% duty cycle) 1,438 ft lbs (1,950 Nm) 
  Holding momentum with clamping              2,655 ft lbs (3,600 Nm) 
  Rapid motion B-axis                         35 rpm 
  Swivelling time of the head from horizontal-vertical & vice versa 1.5 secs 
  Positional uncertainty P                    9 arc seconds 
  INTEGRATED MOTOR SPINDLE- 
  Type                                        Digitally controlled 
  Cooled drive                                Water 
  Power 40% ED                                37.55 hp (28 kW) 
  Power 100% ED                               25.5 hp (19 kW) 
  Spindle speed range                         12,000 rpm 
  Acceleration/deceleration 0-12,000 rpm      2 seconds 
  Number of gear steps                        None 
  Spindle torque 40% ED                       89 ft lb (121 Nm) 
  Spindle torque 100% ED                      60.48 ft lb (82 Nm) 
  Spindle bearing diameter (front/rear)       3.15"/2.16" (80/55 mm) 
  Spindle Taper                               CAT40 
  Clamping power                              8 kN 

FEED DRIVES
  Drive cooled X/Y/Z                          Air/Air/Water 
  Feed Rate X/Y/Z                             590 ipm (15 m/min) 
  Rapid Feed Rate X/Y/Z                       1,968 ipm (50 m/min) 
  Maximum Feed Rate X/Y/Z                     1,968 ipm (50 m/min) 
  ACCELERATION X/Y/Z                          0.6 g IN ALL AXES 
  Feed Power X/Y/Z                            7/7.2/10 kN 
  Ball Screw Spindle X/Y                      1.57"x0.8" (40x20 mm)
  Ball Screw Spindle Z                        1.97"x0.8"(50x20mm)
  VERTICAL CHAIN AUTOMATIC TOOL CHANGER- 
  Magazine pockets                            60
  Maximum tool weight                         17.64 lbs (8 kg) 
  Maximum tool diameter without free pockets  3.15" (80 mm) 
  Maximum tool diameter with free pockets     6.3" (160 mm) 
  Maximum tool length                         12.4" (315 mm) 
  Tool change time Approximately 0.8 seconds, double gripper tool changer 
  Chip-to-chip time Approximately 4 seconds vertical, 10 seconds horizontal 
  EXTERNAL COOLANT SUPPLY ON THE OUTSIDE OF THE SPINDLE- 
  Pump output                                 10.6 gallon/minute (40 l/min) 
  Pump pressure                               22 PSI (1.5 bar) 

PRODUCTION PACKAGE- 
  238 gallon (900 l) coolant unit capacity 
  Automatic paper filter cleaning with fine filtering of the complete 
emulsion to less than 50 um 
  Cleaning of the spindle by spindle air blast for high precision also
for cleaning with frequent tool changes 
  580 PSI (40 bar) 6 gallon/min (23 l/min) coolant thru the spindle centre 
  Rotating clear-view window in cabin pane 
  Chip flushing inside work cabin 
  Chip conveyor 

INSTALLATION DATA- 
  Operation voltage..... 400 V input (comes with multi input transformer) 
  Control voltage                             24 V 
  Max at 100% duty cycle                      100 A 
  Power consumption at 100% duty cycle        64 kVA 
  Recommended net protection                  100 A 
  Recommended short circuit                   3.6 MVA 
  Compressed air required                     87 PSI (6 bar) 
  Air consumption (average value)             20 m-3/h 
  Air consumption with tool cooling           40 m-3/h 
  Total weight with pallet changer            Approximately 22,000 lbs (9 tons) 
3-point support with 3 leveling shoes, no special foundation required 

MACHINE IS EQUIPPED WITH
  Heidenhain iTNC530 CNC Control with HR410 electronic handwheel 
  Blum Laser tool length and diameter measuring, horizontal/vertical 
  Air blast through spindle centre, selected with M-function 
  Spay pistol with pump 
  Multi input transformer 
  Heidenhain glass scales direct measuring system X/Y/Z Axes 
  Heidenhain rotary encoders direct measuring system B/C Axes 
  External coolant nozzles on outside of spindle air/coolant selectable 
  Automatic switch-off of positive air pressure for the main spindle after work

end 
  Linear roller guideways and digital drives. Stability and high precision are

ensured with roller guideways with over-dimensioned distances between the

guideways. The table centre of gravity moves in between the vertical guideways

(Z-Axis). 
  Electronic temperature compensation 
  Spindle chiller 
  Manuals and cd 
  Full enclosure of machining area for safety and noise reduction 
  Sensitive machine parts (measuring systems, limit switches, guide-ways,

drives) are separate from the machining area 
  Automatic pallet changer.

ITEMS TO SHIP
  1/4: DMG DMC60T: Approx 152" L X 134" W X 100" H, 22,000 lbs 
  2/4: COOLANT TANK: Approx 90" L X 56" W X 66" H, 1,500 lbs 
  3/4: CHIP CONVEYOR: Approx 127" L X 27" W X 77" H, 1,000 lbs 
  4/4: TRANSFORMER ON SKID: Approx 48" square, 500 lbs 



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page