EMCO 420MC-plus, 2006, 1" cap, 2-Spindle / 2-Sub-spindle, C-axis,live tool, lodr   Our stock number: 402275

EMCO 420MC-plus, 2006, 1 cap, 2-Spindle / 2-Sub-spindle, C-axis,live tool, lodr

Click on picture below for larger version
EMCO 420MC-plus, 2006, 1 cap, 2-Spindle / 2-Sub-spindle, C-axis,live tool, lodrEMCO 420MC-plus, 2006, 1 cap, 2-Spindle / 2-Sub-spindle, C-axis,live tool, lodrEMCO 420MC-plus, 2006, 1 cap, 2-Spindle / 2-Sub-spindle, C-axis,live tool, lodr
EMCO 420MC-plus, 2006, 1 cap, 2-Spindle / 2-Sub-spindle, C-axis,live tool, lodrEMCO 420MC-plus, 2006, 1 cap, 2-Spindle / 2-Sub-spindle, C-axis,live tool, lodrEMCO 420MC-plus, 2006, 1 cap, 2-Spindle / 2-Sub-spindle, C-axis,live tool, lodr

To the best of our knowledge all details listed below are deemed correct.  It

is the buyers responsiblity to confirm prior to purchase.

Equipped With:
  FMB Turbo Bar Loader
  Parts Catcher

General Specifications:

Technical Data of Machine:
  Working Range:                        ET420MC plus
  Swing Over Cross Slide:               160 (mm) 6.29 (in)
  Distance Between Spindle Noses:       408 (mm) 16.06 (in)
  Max Turning Diameter:                 100 (mm) 3.93 (in)

Max Part Length For Unloading Through 
  The Counter Spindle:                  600 (mm) 23.62 (in)
  Max Bar Stock Diameter:               26 (mm) 1.02 (in)

Travel:
  Travel in X1 / X2:                    78 (mm) 3.07 (in)
  Travel in Z1 / Z2:                    210 (mm) 8.26 (in)

Main Spindle:
  Speed Range:                          0-5000 rpm
  Torque:                               38 (Nm)
  Spindle Nose (centering shoulder):    70 h5
  Spindle Bearing (inside diameter):    60 (mm) 2.36 (in)
  Spindle Bore:                         38 (mm) 1.49 (in)

Counter Spindle:
  Speed Range:                          0-5000 rpm
  Torque:                               38 (Nm)
  Spindle Nose (centering shoulder):    70 h5
  Spindle Bearing (inside diameter):    60 (mm) 2.36 (in)
  Bar Capacity w/ Cuck or Collet Chuck: 26x100 (mm) 1.02 x 3.93 (in) 
  Travel in Z2:                         233 mm 9.17 (in)

C-Axis:
  Resolution:                           0,01 Degree
  Rapid Speed:                          1000 rpm
  Torque:                               38 (Nm)

Spindle Indexing 
  (at each spindle separately):         3 Degree

Drive Power:
  Main Drive at 100% Duty Cycle:        9 (kW)

Tool Turret:
  Number of Tool Stations:              2x 12
  Adaptor Shank to VDI (DIN 69880):     VDI 16
  Tool Cross Section for Square Tools:  16 x 16 (mm) .62 x . 62 (in)
  Shank Diameter for Boring Bars:       25 (mm) .98 (in)
  Indexing Time:                        0,4 Sec.
  Indexing Accuracy (at a radius 100mm):+/- 0,002 (mm)
  Repeatability (at a radius 100mm):    +/- 0,0008 (mm)

  Driven Tools:                         ET420MC plus
  Spindle Speed:                        0-5000 RPM
  Max Torque at each Tool:              3 (Nm)
  Max Power at each Turret:             1.6 (kW)
  Number of Driven Tools at each Turret:2x 4

Feed Drives:                             
  Rapid Traverse X / Y:                 12 / 20 (Min/Max)
  Feed Force in X:                      3000 (N)
  Feed Force in Z:                      3000 (N)
Acceleration Time from 0 to 
  Rapid Traverse in X/Y:                0,1 (S)

Coolant System (Integrated Into Chip Conveyor)
  Tank Capacity:                        200 (I)
  Pump Power (Flushing / Tool Turret):  0,57 / 0,86 (kW)

  Coolant Delivery @ 3,5 Bar / 1 Bar
 (To Rinse Working Area):               15/65 (I/min)

  Coolant Delivery @6Bar/2Bar
 (For Both Turrets):                    5/60 (I/min)

Pneumatic Unit
  Air Pressure Required:                6 (Bar)
  Minimal Air Pressure:                 5,5 (Bar)
  Minimal Size of Air Hose:             1/4"
  Air Volume Required:                  300 (I/min)

Lubrication System: 
Guide Ways and Ball Screw (Feature Oil Saver logic)  Auto Central Oil

Lubrication 
Main Spindle, Counter Spindle (Free of Maintenance)  Grease Lubrication

Clamping System:
Main Spindle w/ Through Hole 
  Actuator System:                      26 (mm) 1.02 (in)
Counter Spindle w/ Actuator System and Integrated Part Ejector

Bar Loader:
EMCO Standard Bar Loader Interface for FMB Double TURBO

Chip Conveyor:
The chip conveyor must be installed under machine. A 24-pin Harting plus is

used to connect the chip conveyor. This includes also a "Coolant Saver Logic"

software.

Parts Catcher:
Pneumatically Operated:                 6 (bar)
Max finished part length:               120 (mm) 4.7 (in)
Max finished part diameter:             26 (mm) 1.02 (in)

Power Supply:
Voltage:                                3/PE - 400V
Max Voltage Fluctuations:               +5 / -10 (%)
Frequency:                              50/60 (Hz)

Operating Conditions:
Required Room Temperature:              +10 to +35 (C) 

Dimensions / Weight:
  Spindle Height Above Floor 
  (Upper/Lower Spindle):                1179/1030 (mm) 46.41/40.55 (in)
  
  Machine Total Height:                 2200 (mm) 86.61 (in)
  
  Floor Space W x D 
  (w/ out chip conveyor):               2200x1500 (mm) 86.41 x 59.05 (in)
  
  Total Weight of Machine 
  (w/ out chip conveyor)                Ca. 2600 (kg)

  Sound Intensity Level:
  Avg. Sound emission Level:            78 db(A)



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page