Okuma Spaceturn LB3000EX-IIM, OSP-P300L, 2013, 3.5" thru, Tailstock, HPC,barfeed   Our stock number: 402223

Okuma Spaceturn LB3000EX-IIM, OSP-P300L, 2013, 3.5 thru, Tailstock, HPC,barfeed

Click on picture below for larger version
Okuma Spaceturn LB3000EX-IIM, OSP-P300L, 2013, 3.5 thru, Tailstock, HPC,barfeedOkuma Spaceturn LB3000EX-IIM, OSP-P300L, 2013, 3.5 thru, Tailstock, HPC,barfeedOkuma Spaceturn LB3000EX-IIM, OSP-P300L, 2013, 3.5 thru, Tailstock, HPC,barfeedOkuma Spaceturn LB3000EX-IIM, OSP-P300L, 2013, 3.5 thru, Tailstock, HPC,barfeed
Okuma Spaceturn LB3000EX-IIM, OSP-P300L, 2013, 3.5 thru, Tailstock, HPC,barfeedOkuma Spaceturn LB3000EX-IIM, OSP-P300L, 2013, 3.5 thru, Tailstock, HPC,barfeedOkuma Spaceturn LB3000EX-IIM, OSP-P300L, 2013, 3.5 thru, Tailstock, HPC,barfeedOkuma Spaceturn LB3000EX-IIM, OSP-P300L, 2013, 3.5 thru, Tailstock, HPC,barfeed

To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.

Very Low Hours, less than 1-shift per day!

Equipped With:
   Okuma OSP-P300L CNC Control
   Collet Chucks on Main & Sub
   Tailstock
   (3) X-Axis Live Tool Holders
   (3) Boring Bar Holders
   (3) OD Tool Holders 
   Part Catcher
   Bar Feed Interface
   Light Tower
   Chip Conveyor
   Royal Mist Collector
   SMW Spacesaver 2003 Bar Loader s/n 11-366 11/00 
   Chip Blaster J30 High Pressure Coolant System w/ filter
   Tool Setter


 
General Specifications
 
Capacity:
   Swing Over Bed:                        22.83"
   Swing Over Saddle:                     18.50"
   Machining  Diameter:                   16.14"
   Work Length:                           19.69"
Travels:
   X-Axis Travel:                         39.37"
   Z-Axis Travel:                         22.24"
   Tailstock Travel:                      20.28"
Spindle:
   Spindle Speed:                         4,200 RPM
   Spindle Nose:                          JIS A2-6
   Through Hole/Bearing Dia::             3.58"/5.51"
Turret:
   Number of Tools:                       12
   Number of Live Tool Position:          12
   ID Tool Shank (I/D):                   1"/1.57"
Tailstock:
   Revolving Center Bore:                 MT5
   Built In Center Bore:                  MT4

Rapid Traverse (X,Z):                     984 / 1,181 IPM 


Cutting Hours 4102
Operating Hours 5190
Spindle Hours 4612

Machine:  98"  x 78.5" x 88.5" 6,000 lbs
Spacesaver Barfeed:  79" x 52.5" x 48.5" 1,500 lbs
High Pressure Coolant:  66" x 26.5" x 75" 965 lbs
Chip Conveyor:  112" x 30" x 66" 1,500 lbs
Coolant Pan:  92" x 24.5" x 12" 350 lbs



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page