1 1/4" TSUGAMI BO326II, Fanuc 31iTB, 2013, w/ Chuck Kit, HPC, Mist Collector, BF   Our stock number: 401790

1 1/4 TSUGAMI BO326II, Fanuc 31iTB, 2013, w/ Chuck Kit, HPC, Mist Collector, BF

Click on picture below for larger version
1 1/4 TSUGAMI BO326II, Fanuc 31iTB, 2013, w/ Chuck Kit, HPC, Mist Collector, BF1 1/4 TSUGAMI BO326II, Fanuc 31iTB, 2013, w/ Chuck Kit, HPC, Mist Collector, BF1 1/4 TSUGAMI BO326II, Fanuc 31iTB, 2013, w/ Chuck Kit, HPC, Mist Collector, BF1 1/4 TSUGAMI BO326II, Fanuc 31iTB, 2013, w/ Chuck Kit, HPC, Mist Collector, BF
1 1/4 TSUGAMI BO326II, Fanuc 31iTB, 2013, w/ Chuck Kit, HPC, Mist Collector, BF1 1/4 TSUGAMI BO326II, Fanuc 31iTB, 2013, w/ Chuck Kit, HPC, Mist Collector, BF1 1/4 TSUGAMI BO326II, Fanuc 31iTB, 2013, w/ Chuck Kit, HPC, Mist Collector, BF

Click the link below to view a video demonstration of this machine
https://youtu.be/lg7q88M9XcI

To the best of our knowledge all details listed below are deemed correct. 
It is the buyer's responsibility to confirmed prior to purchase.


Equipped with (all detail must be confirmed by the buyer):
    Fanuc 32iTB Dual Path Control
    Iemca MiniBoss 332E 
       w/ 21mm & 36mm channels
    Rotary Guide Bushing, A/C Synchronous 
    Chucker Kit

    Double Spindle Adj Angle Mill/Drill Unit 
    Parts Chute
    Parts Conveyor
    MP Systems 8-line High pressure Coolant System (HW8)

    Coolant through the Sub-Spindle
    Front Ejection from Sub Spindle with Air Blast
    TriMist 850 Mist Collection System
    Turbo Chip Conveyor

Approx 5000 run hours in last 3 years.



General Machine Specifications per Manufacturer's Brochure

Number of Axes:                            8 (X1,Y1,Z1,C1,X2,Y2,Z2,C2)

Chucking Barstock Diameter:                8 - 32mm  (0.31 - 1.25")
Max Machining Length:                      320 mm (12.59")
                                             (w// direct Drive Rotary GB)
Max Drilling Diameter:                     12 mm (.47")
Max Tapping Diameter:                      M10
Max Back Spindle Chucking Diameter;        32mm (1.25")
Max Back Spindle Drilling Diameter:        10mm (.39")
Max Back Spindle Tapping Diameter:         M8
Max Tool Spindle Drilling Diameter:        8mm (.31")
Max Tool Spindle Tapping Diameter:         M6
Max Tool Spindle Slotting Diameter:        45mm (1.77")
Main Spindle Speed:                        200 - 8000 rpm
Back Spindle Speed:                        200 - 8000 rpm
Rapid Traverse Rate:                      =32 m/min (X1,Y1,Y2 24 m/min)

Tool Storage Capacity (std/max):           31/43
Stick Tool Size:                           16 x 16 x 100mm
Tooling Configuration:
    Live Cross Drills:                     7
    OD Turning Tools:                      7
    ID Tools (by sub spindle:              2
    ID/BW Tools:                           5
    BW Tools:                              4 Live + 4 Fixed

Main Spindle:                              3.7 / 5.5 kW
Back Spindle:                              2.2 / 3.7 kW
Tool Spindle:                              1.0 kW
Rotary Guide Bushing:                      1.5 / 3.0 kW
X1, Y2:                                    0.5 kW
Y1, Z1, X2, Z2:                            0.75 kW
Coolant Pump:                              400 W
Lubricating Pump:                          3 W

Power Requirements:                        21.4 KVA
Air Requirements:                          0.4 MPa or Above
Air Discharge rate:                        40 NL/min
Coolant Tank Capacity:                     180 L (47.5 gal)

Machine in crate:  138" x 71" x 94" 8,500 lbs
Conveyor on pallet:  128" x 48" x 77" 1,000 lbs
High pressure coolant on pallet:  81" x 76" x 46" 850 lbs



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page