0.315" to 3" dia, Iemca, I-Flex-6, Full 6' bars, 2011, rem retract,no changeover   Our stock number: 401120

0.315 to 3 dia, Iemca, I-Flex-6, Full 6' bars, 2011, rem retract,no changeover

Click on picture below for larger version
0.315 to 3 dia, Iemca, I-Flex-6, Full 6' bars, 2011, rem retract,no changeover0.315 to 3 dia, Iemca, I-Flex-6, Full 6' bars, 2011, rem retract,no changeover

Specifications from OEM brochure and equipped with are described to the best

of our knowledge. ALL items should be confirmed by buyer.

Equipped With:
   Hand Held Remote
   Remnant Retract

General Specifications:
   Bar Diameter Capacity:                 .315" - 3.15"
   Bar Length:                            39" - 3.15"
   Remnant Length:                        15" - 2.55"
                                          10" for Larger Diameters
   Bar Change Time:                       30 Seconds/ 6' Bar

Machine Weight:                           2,500 lbs

Notes from OEM brochure:
Bucci Industries USA has released its newest 6' barfeeder, the I-Flex 6. This

is a compact, versatile short barfeeder designed to run bar sizes from .315"

to 3.15". The I-Flex 6 is the only barfeeder in this diameter range that is

able to retract remnant, the company said. It can operate as a 6' bar feeder

with remnant retract or as a spindle length bar loader.

The I-Flex 6 has the ability to run a range of bar diameters with change of

split bushing and collet only, allowing for quicker changeovers. Additionally,

it is able to run small to high volume production and requires 50% less floor

space than a 12' barfeeder with similar capability, the company said.

"We designed this product to fill a distinct gap in the 6' barfeeder

marketplace," said Cory Miller, Vice President of Operations at Bucci

Industries, USA. "The I-Flex 6 is ideal for job shops that deal with short

runs and require multiple changeovers."

I-Flex 6 accommodates bar lengths of 39"-7'6". It is capable of feeding bars

at high speed without having to cut bar stock to the length of the lathe

spindle. This can reduce the amount of remnant waste and prolongs lathe

spindle bearing life. The barfeeder can load spindle length bars into close

fitting spindle liners for maximum RPM or to use available material.

The fully enclosed lubricated guides are specifically designed to withstand

the harsh working conditions of bar machining. The new quick-change guide

channel system is designed for ultra-rapid guide change over. Magazine set-up

with a single adjusting knob is only required for bar stock with a diameter of

less than 2".

Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page