OKUMA LU-S1600, OSP-P300L, 2 5/8", 2014, installed 2017 - LOW HOURS   Our stock number: 401043

OKUMA LU-S1600, OSP-P300L, 2 5/8 , 2014, installed 2017 - LOW HOURS

Click on picture below for larger version
OKUMA LU-S1600, OSP-P300L, 2 5/8 , 2014, installed 2017 - LOW HOURSOKUMA LU-S1600, OSP-P300L, 2 5/8 , 2014, installed 2017 - LOW HOURSOKUMA LU-S1600, OSP-P300L, 2 5/8 , 2014, installed 2017 - LOW HOURSOKUMA LU-S1600, OSP-P300L, 2 5/8 , 2014, installed 2017 - LOW HOURS

Specifications are from OEM Brochure and Equipped With items are described to

the best of our knowledge.  ALL items show be confirmed by the buyer.

Equipped With:

    OSP-P300L control
    725 cutting hours
    Machining NAVI (microphone system to adjust VSS and reduce chatter)
    Okuma steady rest interface (electronics and software)
    Schunk steady rest mounted on lower turret
    8 spare M-codes 
    MP Systems RF8 high pressure coolant 1000 psi
    Royal QC65 Quick Change Collet Chuck
    M-Code operated Chip conveyor

List price was $318,931.00 (with steady rest and HP coolant)

General Specifications

PART CAPACITY
Swing over bed                         19.69 in.
Max. turn diameter                     6.3 in.
Standard turning diameter              2.36 in
X-axis travel 
    Upper                              3.94 in.
    Lower                              3.94 in.
Z-axis travel 550C 
    Upper                              22.44 in.
    Lower                              22.44 in.
Maximum turning length 550C            21.6 in.

STANDARD SPINDLE 
Spindle nose                           JIS A2-6
Spindle speed range                    40~4,000 rpm
Number of Ranges                       Single range
Spindle bore diameter                  2.44 in.
Spindle bearing inner diameter.        3.93 in.

STANDARD SPINDLE - MOTOR - OSP
Main Spindle Motor Type                Base mounted VAC
Number of ranges                       Single ranges       Stepless
Main Spindle Motor Power -30 min/cont=15 / 10hp            11/7.5 kW
Main Spindle Max Motor Torque -30/cont 103/88 lbf-ft       140/95 N-m

STANDARD SPINDLE - MOTOR - FANUC
Main Spindle Motor Type                Base mounted VAC
Number of ranges                       Single ranges       Stepless
Main Spindle Motor Power - 
    30 min/60min &cont                 15 / 10hp           11/7.5 kW
Main Spindle Max Motor Torque
    30 min/60min/cont                  103/70/52 lbf-ft    140/95/71N-m

TURRETS
Turret type - Inch Based - USA Std 
    Upper                              6 station slotted - inch spec
    Lower                              6 station bot on - inch spec
Turret indexing time                   0.15 sec. / Non-lift design
Turret Coupling System                 Crown Gear Engagement
Turret Clamping                        Hydraulic Clamping
Turret coolant                         Onion nozzles for standard and 
                                         inverted tools
Turret OD tool clamping                Wedge clamp

FIXED TOOLING
Tool shank OD                          1" square

SERVO DRIVES - OSP                     INCH                METRIC
Rapid feedrate X (A & B) axis          787 inch/min.       20 m/min.
Rapid feedrate Z (A & B) axis          1181 inch/min.      30 m/min.
X-axis servo power - Okuma BL 
    Upper                              4 hp                3.0 kW
    Lower                              2.9 hp              2.2 kW
Z-axis servo power - Okuma BL 
    Upper                              4.6 hp              3.5 kW
    Lower                              4.6 hp              3.5 Kw

SERVO DRIVES - FANUC                   INCH                METRIC
Rapid feedrate X (A & B) axis          787 inch/min.       20 m/min.
Rapid feedrate Z (A & B) axis          1181 inch/min.      30 m/min.
X-axis servo power - Okuma BL 
    Upper                              2.4 hp              1.8 kW
    Lower                              1.6 hp              1.2 kW
Z-axis servo power - Okuma BL 
    Upper                              3.3 hp              2.5 kW
    Lower                              3.3 hp              2.5 Kw

BALL SCREWS                            INCH                METRIC
Diameter x Pitch
Ball screw diameter X-axis 
    Upper                              1.259 in x 0.47 in  32 mm x 12 mm
    Lower                              1.259 in x 0.63 in  32 mm x 16 mm
Thrust Bearing location X-axis               X minus (pre-tensioned)
Ball screw diameter Z-axis 550C 
    Upper                              1.25 in x 0.63 in   32 mm x 16 mm
    Lower                              1.25 in x 0.63 in   32 mm x 16 mm

TAILSTOCK (550 MODEL)                  INCH                METRIC
Body positioning                       By separate ballscrew (W axis)
Body movement                          Linear guides
Standard quill type                    Dead quill ( Employs revolving center)
Quill diameter                         3.54 in.            90 mm
Quill ID                               MT No. 5 Dead
Quill stroke                           4.724 in.           120 mm
Quill Initiation                       Foot pedal / NC Command
Center tooling                         MT 5 Revolving Center

EQUIPMENT FLOOR SPACE 550C             INCH                METRIC
Machine Height 550                     80"                 2,045 mm
Req. floor space required W x D 550
(excluding chip conveyor)              88 in x 78 in       2240 mm x 1,980 mm
Machine weight 600 BCD                 9,240 lbs.          4,200 kg



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page