3/4" TSUGAMI BS20BII, Fanuc LH-1, 2000, C-Axis, Sub, Iemca Mag BF   Our stock number: 400702

3/4 TSUGAMI BS20BII, Fanuc LH-1, 2000, C-Axis, Sub, Iemca Mag BF

Click on picture below for larger version
3/4 TSUGAMI BS20BII, Fanuc LH-1, 2000, C-Axis, Sub, Iemca Mag BF3/4 TSUGAMI BS20BII, Fanuc LH-1, 2000, C-Axis, Sub, Iemca Mag BF3/4 TSUGAMI BS20BII, Fanuc LH-1, 2000, C-Axis, Sub, Iemca Mag BF3/4 TSUGAMI BS20BII, Fanuc LH-1, 2000, C-Axis, Sub, Iemca Mag BF
3/4 TSUGAMI BS20BII, Fanuc LH-1, 2000, C-Axis, Sub, Iemca Mag BF3/4 TSUGAMI BS20BII, Fanuc LH-1, 2000, C-Axis, Sub, Iemca Mag BF3/4 TSUGAMI BS20BII, Fanuc LH-1, 2000, C-Axis, Sub, Iemca Mag BF3/4 TSUGAMI BS20BII, Fanuc LH-1, 2000, C-Axis, Sub, Iemca Mag BF


General Specifications per Brochure:
(Specifics to be confirmed by buyer)

CNC Control:                                Fanuc LH-1 (18i-TA)
Maximum Bar Diameter:                       3/4"
Z1-Axis Travel:                             8.21"
Main Spindle
   Spindle Speed:                           200 to 8,000 RPM
   Indexing:                                C-Axis
   C-Axis Increment:                        0.001 Degree
Number of Tool Stations:                    6 OD, 4 ID, 3 ID/OD BW Tools
                                            4 Cross Driven Tools
Tooling Sizes, OD Turning:                  5/8" Square
Programmable Servo Axis Designations:
   Z1 Main Headstock In and Out:            8.21"
   T1 OD Tool Slide Up and Down:            5.90"
   X1 OD Tool Slide Right and Left:         2.00"
   X2 ID Tool Slide Up and Down:            7.90"
   Auxiliary Slide Motion:
   Z2 I.D. Tool Slide In and Out
    (Synchronous to Z1):                    7.88"
Sub-Spindle Specifications:
   Maximum Diameter:                        0.787"
   Maximum Drill Capacity - Mild Steel:     3/8"
   Maximum Tap Capacity - Mild Steel:       5/16"
   Speed Range (Serial Interface):          200 to 7,000 RPM
   Power Rating:                            3.0 HP
   Sub-Spindle Indexing:                    15 Degree increment
Part ejection:                              front or rear ejection
Horsepower of Main Spindle:                 5.0 HP
Driven Tool Drive Motor Rating:             1.5 HP
Maximum Speed Cross Tool T10-T12:           200-5,000 RPM
Maximum Speed Cross Tool T13:               120-3,000 RPM 
Offset From Guide Bushing T10 & T11:        0.472"  (.397 max. shank)
Offset From Guide Bushing T12:              0.965"  (.511 max. shank)

Equipped With:
  Live off-center drill (1, located under the sub)
  Iemca Magazine Mini Boss 325 bar feed 
      with 28mm and 13mm channel sets

Tsugami BS20BII 95" x 72" x 76" 5,500 lbs
Iemca Boss 325 Barfeed 176" x 24" x 51" 2,250 lbs
Pallet w/misc 34" x 28" x 16" 100 lbs



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page