1 1/4" TSUGAMI SS327-5AX, 2015, Fanuc 31iB5, B Axis, 9-Axis   Our stock number: 400667

1 1/4 TSUGAMI SS327-5AX, 2015, Fanuc 31iB5, B Axis, 9-Axis

Click on picture below for larger version
1 1/4 TSUGAMI SS327-5AX, 2015, Fanuc 31iB5, B Axis, 9-Axis1 1/4 TSUGAMI SS327-5AX, 2015, Fanuc 31iB5, B Axis, 9-Axis1 1/4 TSUGAMI SS327-5AX, 2015, Fanuc 31iB5, B Axis, 9-Axis

All details must be confirmed by buyer:

Equipped With
    Deep hole drill holder(25mm dia x 2 Holes)
    Tool-height Compensation Function
    Tool counter
    Periodic maintenance screen
    Main Spindle Adapter
    Back spindle adapter
    Automatic Cutting Off Function / Automatic Facing Function
    Coolant Level Switch
    Auto Power Shut Off
    Back Spindle Air Burge
    Cross drill air purge
    Main spindle brake
    Glass scales on the X2 and Y2
    MP Systems 2000 PSI Coolant System  with 8 Outpus for Oil
    Tri Mist 850 Mist Collection System


General Specifications from Manufaturer's Brochure:

Control:                               Fanuc 31i-B5
Axes:                                  9 (X1, Y1, Z1, C1, B, X2, Y2, Z2, C2)
Barstock DIameter:                     8 - 32mm
Max. Machining Length:                 320 mm (Direct Drive Rot Guide Bushing)
                                       70 mm (Guide Bushingless Kit - OP)
Main Spindle Drilling Diameter:        12mm
Main Spindle Tapping Diameter:         M10
Back Spindle Chucking Diameter:        32mm
Max Back Spindle Drilling Diameter:    8mm
Max Back Spindel Tapping Diameter:     M6
Max Cross Drilling Diameter:           8mm
Max Cross tapping Diameter:            M6
B Axis Tool Spindle
    Max Drilling Diameter:             8mm
    Max Tapping Diameter:              M6
    Max Spindle Speed:                 5000 rpm
Machine
    Main Spindle Speed:                200 - 8000 rpm
    Back Spindle Speed:                200 - 8000 rpm
    Tool Storage Capacity:             38
    Live Tool Positions:               16/17 (std/max)
    Tool Size:                         16mm x 100 mm
    Rapid Traverse Rate:               32 m/min (X1, Y1, Y2: 24 m/min)
Tooling:
    Live Tools Gang Plate:             4
    Turning Tools on Gang Plate:       8
    ID/BW positions on Gang Plate:     5 Can accommodate 2 sided sleeves)
    Live tools on B-Axis:              8 (4 front + 4 back)
    Fixed BW Positions:                4
    Live Back Working Positions:       4
    Live Cross Back Working Positions: 2
Motors
    Main Spindle:                      3.7 / 5.5 kW
    Back Spindle:                      2.2/3.7 kW
    Cross Drill of Front Tool:         1.0 kW
    B-Axis:                            1.0 kW
Power Source Requirement:              21 KVA
Weight:                                3600 kg
                                       8000 lbs
Dimensions:                            2150 x 1280 x 2010mm
                                       85" x 51" x 80"


Ultimate Swiss Turn for Complex-Shaped Parts
 
The Tsugami SS327-5AX Swiss Type Lathe is a high performance automatic lathe

with a servo-driven B-axis, which enables you to cut complex parts complete in

a single setup. The B-axis contains live tools (four front, four rear) which

can machine in coordination with the C-axis, delivering the ability to cut

precise angles and sculpted contours. The B-axis functionality transforms this

Swiss type lathe into a multitasking turning center that can drill, tap, and

end mill any angle.   

The modular tool zone makes it easy to change cartridge-type live cross and

face tools in either the main or sub spindle, decreasing changeover time. 

Multiple angle cuts by the same tool also decreases the total number of tools

required. For machining complex shapes, this is the ultimate Swiss type lathe. 

Key Advantages include:   
    7-axis Machining, Simultaneous 4 & 5-axis Machining with CAD/CAM 
    Servo-driven B-axis Tool Spindle can machine virtually any angle -

drilling, tapping, end milling
    B-axis Live Tools (four front, four rear) create sculpted shapes
    B-axis Control enables thread whirling or hobbing without dedicated

attachments
    Mutual Tool Use for Different Angles via B-Axis Control 
    Modular Tool Zone, cartridge type live cross and face tools, main and sub

spindle
    Fanuc 31i-B5

The Tsugami SS327-5AX CNC Lathe is CONVERTIBLE and may be run as a traditional

sliding headstock Swiss Type Lathe using the guide bushing or run without the

guide bushing with the addition of an optional chucker kit. When run as a

chucker, the lathe can use drawn bar stock instead of centerless ground stock,

dramatically reducing remnant size and increasing shop flexibility. 

Machine:  97" x 60" x 83" 7,950 lbs
Box of Manuals/Tools:  21" x 19" x 12" 100 lbs





Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page