Ganesh Genturn 32-NCY, MCY-32 Control, 1 3/8", 2018, Full Contour, Live Tools   Our stock number: 400589

Ganesh Genturn 32-NCY, MCY-32 Control, 1 3/8 , 2018, Full Contour, Live Tools



All Information From OEM Brochure Should Be Verified By Buyer:

Equipped With:
 Cross SLide Live Tooling Module w/ 4-Gear Driven Cross Working Stations
(Includes 4 ER-20 Live Tool Spindles)
 Axial Slide Live Tooling Module w/ 3-Gear Driven Axial Live Tool Stations
(Includes 3 ER-20 Live Tool Spindles)
 Chip Auger w/ High Angle Chip Discharge Chute to Allow Chips to Drain
(Chip Cart Included)
 Three ER-20 Collet Extensions for Drilling, Tapping, Boring, Reaming
(For Static ID Tool Stations)
 Parts Catcher w/ Parts Collector Basket
 3-Light Machine Status Lamp
 Brown & Sharpe #22 or Traub A-32 "Dead Length" Screw Machine Collet Chuck
(Up to 1.25" Bar Diameter)
 3/4 HP Coolant System w/ Coolant Flow Confirmation Sensor
 Adjustable Coolant "eyes" for the 5-ID Tools and 3-Axial Driven Tools
(3-Adjustable Flood Coolant Nozzels)
 Hydraulic Collet Closer System w/ Stroke Control Collet Safe Position Monitor
 Machine Worklight, Barfeed Interface

Specifications:

AXIS TRAVELS
CNC Controlled Axis:                   4 Axis (X, Y, Z, C)
X-Axis Travel (Vertical Tool):         7.5" (190mm)
Y-Axis Travel (Cross Tool):            19.3" (490mm) - True Y-Axis
Z-Axis Travel (Sliding Headstock:      6.5" (165mm) 
C-Axis Travel (Rotational Axis):       360 Degrees (360,000 Radial Positions)

SPINDLE
Spindle Bore:                          1.456" (37mm)
B&S#22 or Traub A-32 Collet Capacity:  1.25" (32mm), 1-3/8" (36mm)
                                       (Collet Adapter Available)
Spindle Speed:                         6,000 RPM
Spindle Horsepower:                    10 HP, 3,000 RPM (2:1 Pully Ratio)
Spindle Center Height:                 38" (965mm)
Rigid Tapping on Main Spindle:         Yes
Spindle bearing (O110mm):              5-Ball Bearing Spindle, 3-Front& 2 rear

TOOLING SYSTEM
Number and size of turning stations:   6 Tools of 1/2" or 12mm
                                       (5 Stations of 5/8" Optional)
Number of Internal Static Tools:       5 ID Tool Stations (25mm Bores)
I.D. Tool Bores (Round Shank):         25mm Bore for ER-20 Collet

DRIVEN TOOL SYSTEM
Number of cross working driven tools:  4 Cross Driven Tool Stations w/ ER20
Number of end working live tools:      3 Axial Driven Tool Stations w/ ER20
Size of driven tools (round shank):    ER-20 Collet Capacity (1/16-1/2")
Rigid Tapping with Driven Tools:       Included for Main Spindle/Driven Tools
Driven Tool programmable range:        0-4,000 RPM - Stepless
Driven Tool HP:                        Radial 2.0 HP (1.5kw)/Axial 1 HP/.75kw

AXIS DRIVES
Rapid Travers Rate - X, Y, & Z axis:   1,181 ipm (30m/minute)
Maximum federate for thread cutting:   236 ipm (6m/minute)
Minimum Programmable Input:            0.0001" (0.001mm = 40 millionths)

C-Axis Resolution:                     0.001 degree (360,000 Radial Positions)
Brushless AC Servo Motor Drive:        X = 2-HP (1.5kw), Y&Z = 1.5-HP (1.0kw)
Ballscrew diameter:                    25mm diameter - 10mm pitch double-nut


SYSTEM REQUIREMENTS
Electrical Requirements:               16 KVA - 42 amps @ 220 vac  5% 3-Phase
Pneumatic Requirements:                85 psi @ 10-cfm for parts catcher 
Hydraulic System Capacity:             10-gallon (40 liter) hydraulic tank,

                                       500 psi pressure
Coolant Pump Motor/ Tank Capacity:     3/4" HP w/ Flow Sensor/50 Gal Tank
Automatic Metered Lubrication system:  3-6cc/15-Minute, Adjust. Lube Flow Rate

GENERAL
Floor Space - L x W x H:               86" x 74" x 76" (2,176 x 1,858 x 1919) 
Machine Spindle Center Height:         38" (965mm)
Machine Net Weight:                    6,172 lbs (2,800 kgs)

MACHINE OPTIONS

Ganesh Genturn 3-NCY Production Package:                            $94,990.00
 Includes Servo Automatic 3' Barloader - Installed
With 1-Spindle Liner, Coolant Collector

Factory machine installation: "Peace-of-Mind Factory Installation"

Includes Expenses:                                                  $2,995.00

Factory on-site 3-day machine operation and program training

Includes Expenses:                                                  $3,995.00

Chuck Open/Close Foot Pedal (Recommended for second operation work):$395.00

Extra M-Codes (Total of 8-sets of I/O):                             $1,495.00


Voltage Stabilizer,30 KVA (for areas with an unstable power source):$2,995.00

Fire Suppression System - with custom installation & interface:     $7,495.00

COOLANT OPTIONS
 MP-Systems 4-Port 1,000-PSI High Pressure Coolant System-Installed:$9,995.00


 MISTBUSTER-850 Oil Mist Filtration Unit - installed:               $3,495.00


Oil Chiller System (12,000 BTU) for high accuracy machining:        $4,495.00
 Installation of Coolant Chiller System with connectors and plumbing: $495.00


 36mm 1-3/8" extended capacity collet chuck:                        $495.00 
(for straight barstock only)


TOOLING CERTIFICATES
For Collets, Bushings, Bore Bar Sleeves, Spindle liners, cutting tools,

machine options etc.

$2500 Tooling Certificate 
$5000 Tooling Certificate 
$10,000 Tooling Certificate 

BARFEEDER OPTIONS - INTERFACE INCLUDED WITH THE MACHINE PACKAGE
DUNHAM Bar-Puller Kit#1 (1/4"-1.25" Capacity):                      $695.00






Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page