1 5/8", Ganesh Genturn SL42Y2, Mitsubishi M830, 2018, Front/Back Working   Our stock number: 400588

1 5/8 , Ganesh Genturn SL42Y2, Mitsubishi M830, 2018, Front/Back Working

All Information From OEM Brochure Should Be Verifed By Buyer:

Equipped With:
 Mitsubishi M830 CNC control with 8-axis simultaneous motion

 19-Main-Spindle Tool Holders (33-Total standard Tool Holders)

 14-Sub-Spindle Tool Holders (33-Total Standard Tool Holders)

 Sub-Spindle Programmable Cutting Oil Flush
 Parts catcher and finished parts conveyor 
 "Dead-Length" Traub-42 / 173E Collet Systems for Both Main & Sub Spindle

 Cutoff confirmation sweep-arm switch 
 Collet Chuck for both main and subspindle with Hydraulic Actuators

 Non-Guide-Bushing Collet Holder for 42mm Barstock

 18,000 BTU Oil Chiller System Installed
 Sub-spindle programmable air blast and Finished Parts Ejector

 High-Performance "C"-Axis on both the main and subspindle

 Rigid Synchronous Tapping
 10-Horsepower Integral "Beltless" Main & Sub Spindle Motors

 Spindle Chiller for Main & Sub-Spindle Temperature Control

 1-3/4-Horspepower Coolant Pump, w/ double coolant filtration

 Coolant flow confirmation monitoring switch with fault interrupt interface

 9-live-tools: 6-ER-20 & 3-ER-16 collet spindles, work area illumination

 Automatic barfeed interface, Barfeed Connector, Tool Box & Tool Kit


Specifications:

MAIN SPINDLE WITH FULL C AXIS:
Maximum RPM / spindle bearing:      6,000 RPM

(5-bearing spindle, 3-front, 2-rear ball bearings) 

Main Spindle Servo Motor:           10-HP 15 Min Duty Rated (7.5HP Constant)

Collet Style for main & subspindle: Traub 42 / 173E
Collet Closer Style:                Lever action collet closer-driven by

hydraulic piston
Guide Bushing Type:                 Optional Rotary Guide Bushing
                                    (Uses Hardinge STM38 Bushings)
Bar Diameter W/or W/O GuideBushing: 1/4" - 1 5/8" (5-42mm) Without G/B
Turning Length (Rotary):            12.20 Single Stroke (310mm)
Turning Length (Without Bushing):   4.13 (105mm)
Spindle Bore:                       1.732" (44mm)


MAIN SPINDLE TOOLING:               17-Tool Holders - (30 Standard Total)


O.D. Turning Tool Holders-S1:       (6) 16mm square shank turning tool holders
I.D. Internal Tool Holders-S1:      (5) 25mm Shank Round Tool Sleeve Bores

I.D. Deep Hole Drill Positions-S1   (2) 25mm Shank Round Tool Sleeve Bores

Cross slide live tools-S1:          (6) ER-20, 4,000 RPM, 2.0 HP (1.6kw)

Axial front slide live tool opt.S1: (3) ER-20 - Optional in Lieu of 1 Cross T.

Maximum Drilling/Tapping Capacity:  13mm Drilling/M10 Tapping - Main Spindle

Cross Drilling / Tapping Capacity:  10mm Drilling/ M6 Tapping - Cross Tools


SUB SPINDLE WITH FULL C AXIS:
Sub spindle RPM / spindle bearing:  6,000 RPM/4 Bearing - Quad Duplex

Sub Spindle Servo Motor (2.2/3.7kw) 10-HP, 15 Min Duty Rated (7.5HP Constant)

Collet Style for main & subspindle: Traub 42 / 173E

Barstock Diameter:                  1-5/8" (42mm)

Finished Parts Ejector & Air Blast: Included

workpiece length/front ejection:    110mm part length for front ejection


SUB-SPINDLE BACK-WORKING TOOLING:   14-Tool Holders

O.D. Turning Tool Holders-S2:       (3) 16mm Square Shank Turning Tool Holders

I.D. Internal Tool Holders-S2:      (5) 25mm Shank Round Tool Sleeve Bores

I.D. Internal Tool Holders-S2:      (3) ER-16 Fixed Tools - 3/8" Max.

Subspindle axial live tools-S2:     (3) ER-16 Axial Live Tools 4,000 RPM/ 1 HP

Drilling/Tapping Capacity:          13mm Drilling / M10 Tapping

Cross Drilling/Tapping Capacity:    8mm Drilling / M6 Tapping


AXIS:
Main Spindle Stroke:                12.20" (310mm)

X1,Y1,Z1,X2,Y2,Z2 Rapid Traverse:   944 IPM (24m/minute)

X1,Z1 Axis Motor Power:             2-HP (1.4kw)

X2,Y1,Y2,Z2 Axis Motor Power:       1-HP (.75kw)
Linear Ways - X1, Y2:               Ball Bearing Linear Ways
Linear Ways - X2,Y1,Z1,Z2:          Roller Bearing Linear Ways

Minimum input unit:                 0.0001" (0.001mm = 40 millionths)

 
MACHINE SPECIFICATIONS:
Machine Dimensions (L x W x H):     121" x 67" x 83" (2925 x 1690 x 2100 mm)

Machine Weight:                     11,024 lbs (5000kgs)

Coolant Pump Power:                 1-3/4 HP (1.3kw)

Coolant Tank Capacity:              65-Gal Coolant Tank (250L) (Oil Only)

Lubrication distribution-2-liter    Way lube @ 3-6cc / 15 Minute Cycle

Machine Power Requirements:         220vac, +5%, 53 Amps, 20kva, 3-Phase, 60hz

Air Requirements:                   85-PSI @ 6-CFM 


MACHINE OPTIONS:

Genturn SL-42Y2 Production Package:                                $209,990.00

 W/ Edge Patriot 551 12' Barloader, Axial Shift - Installed
 Including 1 Channel Set, 1 Spindle Liner

Genturn SL-42Y2 Grand Package:                                     $219,990.00
 With Edge Patriot 551 12' Barloader - Installed
 Iscar Start-Up Tooling Package
 MistBuster 850 Mist Collector
 MP Systems, 4 Port, 1,000 PSI High Pressure System - Installed

Factory machine installation: 
"Peace-of-Mind Factory Installation" - includes expenses:          $2,995.00


Factory on-site 3-day machine operation and program training - 
includes expenses:................................................ $3,995.00

Sychronous Rotary Guide-Bushing Option:                            $6,995.00


Chip Conveyor & Chip Cart-link-belt style:........................ $3,995.00


TURBO Chip Conveyor with fine chip filtration 
(recommended for fine brass chips): .............................. $10,990.00


Long Parts Catcher-from rear of subspindle:....................... $3,995.00


Extra M-Codes (Total of 8-sets of I/O):........................... $2,495.00


Voltage Stabilizer - for areas with un-stable power:.............. $2,995.00


CUTTING OIL OPTIONS: (use cutting oil only, do not use water soluble

coolants!)

1,000 PSI MP-Systems 4-Port High Pressure Coolant System 
(2,000 PSI at pump outlet):....................................... $9,995.00


MISTBUSTER-850 Coolant Filtration Unit-installed:................. $3,495.00

Fire Suppression System-with custom installation & interface:..... $7,495.00


Main-Spindle - Extended Capability Tooling: (use in lieu of an existing cross-

driven toolholder)

Dual-End Axial 3-spindle milling head, ER-20 front, ER-16 rear, 6,000 RPM

limit, 1:1:........................................................$$6,995.00
(Adjustable Angle Unit, 0-90, 3-spindle ER-20 front & 3 - ER-16 Backworking)

Manual adjustable angler milling head, 6,000 RPM limit, 1:1 gear ratio
(Fits Station #26):.................................................$7,490.00

Slitting Saw, O70mm max. O.D., saw arbor shank O12.7mm, 4,000 RPM, 1:.37 ratio

(uses sta. # 24 & 25):.............................................$6,995.00

SUB-SPINDLE - EXTENDED CAPABILITY TOOLING: (use in lieu of an existing axial-

driven toolholder)

Axial ER-16M driven tool, 6,000 RPM limit, 1:1 ratio (3-included with base

machine) (sta. #31-38):........................................... $1,195.00

Axial ER-16 fixed collet chuck holder (3-included with base machine) (use in

sta. # 31 - 38):.................................................. $198.00

Axial fixed tool holder with 16mm tool bore (use in tool station # 31 - 38)

                                                                   $195.00
Axial O20mm boring tool holder (Station #31-38):                   $245.00

Axial O25mm boring tool holder (Station #31-38):                   $245.00

OD 16mm Tool Holder (Station #31 or 35):                           $195.00

Cross Drilling/Milling Unit, ER-11, 6,000 RPM limit, 1:1 speed ratio (use in

tool station # 31-34):............................................ $3,995.00

Slitting Saw, Right-Angle, ER-11A, 4,000 RPM, 1:.55 speed ratio (use in tool

station # 31 - 34):............................................... $4,995.00

TOOLING CERTIFICATES
For Collets, Bushings, Bore Bar Sleeves, Spindle liners, cutting tools,

machine options etc.

$2500 Tooling Certificate 
$5000 Tooling Certificate 
$10,000 Tooling Certificate 

TRAINING & TERMS OF SALE 

Lifetime FREE Training:
Ganesh Machinery offers a 3-day training program for
all production CNC machines at our training center. The intense training
program includes basic manual programming, machine setup, operation, and
operator level maintenance for those with a working knowledge in the
programming & setup of CNC machines. Training does not cover CAD/CAM systems
or Manual Guide-i type of programming.  There is no charge for the training
program at Ganesh for our customers.  Turn-key projects and on-site training
are an available option charged at the prevailing hourly rate.  

Warranty:
1 full year Ganesh parts and labor warranty on the machine and 3-
years CNC control & drives.

Service and Parts:
Ganesh or your authorized Ganesh trained servicing dealer
provides installation and service.  Spare parts are stocked at Ganesh in
Chatsworth to support your continued machine operation.
F.O.B. Point: Machines ship F.O.B. Ganesh Machinery from Chatsworth, CA 91311


Payment Terms:
20% down payment with your Purchase Order secures the machine.
70% is due prior to machine shipment, and the 10% balance is due net-30 days
after installation.  Or the machine can be financed with a Ganesh approved
lender.  Leases with $1.00 buyout are available upon approved credit.  
Delivery Schedule: Delivery is stock to 12-weeks, subject to prior sales.
Purchase is governed by the Ganesh Machinery terms and conditions of sale.
UL & TV ELECTRICAL APPROVAL IS AN AVAILABLE OPTION
Prices and specifications subject to change without prior notice.



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page