1 1/4", TSUGAMI, BS32CIII, Fanuc LH1,'03,7-Axis, 6OD/4Live/5ID(2Live)/5BW, Iemca   Our stock number: 400492

1 1/4 , TSUGAMI, BS32CIII, Fanuc LH1,'03,7-Axis, 6OD/4Live/5ID(2Live)/5BW, Iemca

Click on picture below for larger version
1 1/4 , TSUGAMI, BS32CIII, Fanuc LH1,'03,7-Axis, 6OD/4Live/5ID(2Live)/5BW, Iemca1 1/4 , TSUGAMI, BS32CIII, Fanuc LH1,'03,7-Axis, 6OD/4Live/5ID(2Live)/5BW, Iemca1 1/4 , TSUGAMI, BS32CIII, Fanuc LH1,'03,7-Axis, 6OD/4Live/5ID(2Live)/5BW, Iemca1 1/4 , TSUGAMI, BS32CIII, Fanuc LH1,'03,7-Axis, 6OD/4Live/5ID(2Live)/5BW, Iemca
1 1/4 , TSUGAMI, BS32CIII, Fanuc LH1,'03,7-Axis, 6OD/4Live/5ID(2Live)/5BW, Iemca1 1/4 , TSUGAMI, BS32CIII, Fanuc LH1,'03,7-Axis, 6OD/4Live/5ID(2Live)/5BW, Iemca1 1/4 , TSUGAMI, BS32CIII, Fanuc LH1,'03,7-Axis, 6OD/4Live/5ID(2Live)/5BW, Iemca1 1/4 , TSUGAMI, BS32CIII, Fanuc LH1,'03,7-Axis, 6OD/4Live/5ID(2Live)/5BW, Iemca

All details must be verified by the buyer.


Equipped with (must be confirmed by buyer):
   Iemca Boss 432/37 Magazine Loader, S/N A01051601
   Chip Conveyor
   Long Part Tray

Machine has run water for selected jobs.  Mostly runs oil.


GENERAL SPECIFICATIONS FOR THE TSUGAMI BS32-C MARK III

Control:                                    Fanuc LH-1
                                            Fanuc 18iTB
Maximum Bar Diameter:                       1 1/4"
Z1-axis Travel  (synchronous to "Z2"):      9.75"
Main Spindle:
   Spindle Speed:                           200 to 7,000 rpm
   Indexing:                                Full C-Axis (.001 degree)
Programmable Servo Axis Designations:
   "Z1" main headstock in and out:          9.75"
   "T1" OD tool slide up and down:          11.6"
   "X1" OD tool slide right and left:       2.28"
   "X2" ID tool slide up and down:          8.66"
   Auxiliary Slide Motion:
   "Z2" ID tool slide in and out:
   (Synchronous to "Z1"):                   7.88"
Sub-spindle Specifications:
   Maximum Diameter:                        1 1/4"
   Maximum Drill Capacity - mild steel:     .472"
   Maximum Tap Capacity - mild steel:       .393"
   Speed Range (serial interface):          200 to 6,000 rpm
   Power Rating:                            2.7 hp
   Sub-spindle Indexing:                    5 degree increment
Part Ejection:                              Front or Rear Ejection
Horsepower of Main Spindle:                 7.5 hp
Driven Tool Drive Motor Rating:             1.5 hp
Maximum Speed Cross Tool T10-T12:           200-5,000 rpm
Maximum Speed Cross Tool T13:               120-3,000 rpm 
Number of Tool Stations:                    6 OD, 5 ID, 3 ID/OD B/W Tools
                                            4 Cross Driven Tools
Tooling Sizes, turning:                     5/8" square
Dimensions (apprx):                         88" x 60" x 7'h
Weight (apprx):                             6000 lbs.




Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page