98.42"X, 39.37"Y, 35.43"Z, Ganesh Genmill 10039, 2018, Mits M830, 12,000 RPM   Our stock number: 400456

All Information From OEM Brochure Should Be Verified By Buyer:

Equipped With:
 12,000 RPM Direct-Drive Beltless Spindle
 Big-Plus Dual-Contact High Performance Precision Spindle
 40-Tool High Speed Twin Arm Tool Changer
 32-GB Solid State Data Server Intergral to CNC Control
 Chip Wash Down Coolant System
 Twin Chip Augers to Push Chips Forward
 300 PSI "Through-the-Spindle" Coolant System with Rotary Union
 Full Machine Enclosure with Top Covers (precut for exhaust duct)
 Spindle Air Blast By M-Code
 Spindle Oil Cooler - Thermostatically Controlled
 Coolant Oil Seperator to Control Coolant Contaminants
 Remote Operator MPG Hand Wheel with Magnetic Base
 Dual LED High-Intensity Worklamps
 High Speed Synchronous Rigid Tapping
 6-Thru-Tool-Coolant Pull Studs
 4th & 5th Axis Prewired with a Quick-Disconnect Connectors
 Machine Condition Display Signal Lamp

Axis Travel
 X-Axis (6 Cross Roller Trucks):      98.42"             2500mm
 Y-Axis (4 Cross Roller w/ 8 Trucks:  39.37"             1000mm
 Z-Axis:                              35.43"             900mm
 Spindle to Rotary Table Surface:     9.8-45.27"         250-1150mm
 Spindle Center to Z Way Covers:      41.53"             1055mm (Throat)

 Table Size:                          98.42" x 39.37"    2500mmx1000mm
 T-Slot Width (5 T-Slots Total):      22mm               1260mm Centers
 Table Load:                          7700 lbs           3500 kgs load

 Spindle Motor:                       50 HP S3 Power     35HP 30-Min

 Spindle Speed:                       12,000 RPM         15-20,000 RPM Option

 Tool Type:                           CAT #40 Taper      CAT/BT #40/50 Option

 Retention System/Holding Capability  BellVille Spring Stack (1650-1760 lbs)
 Spindle Runout:                      <0.000040" TIR
 Spindle Bearings - Rear:             110mm NSK70BNR     2-P4 Class 7 Bearing
 Spindle Bearings - Front:            110mm NSK70BNR     2-P4 Class 7 Bearing
 Retention Knob:                      C40-4502H (Coolant)
 Spindle Taper Material:              SCM415/HRC58-62

Axis Feeds
 Rapid Traverse (X,Y):                472 IPM            15m/minute
 Rapid Traverse (Z):                  393 IPM            10m/minute
 Axis Drive Motor Power (X,Y,Z):      10HP               7kw w/ Brake
 Cutting Feedrate:                    0.2-393 IPM        10m/minute

 Ballscrews (X,Y,Z):                  63mm Ballscrews    10mm Pitch
 Least Input Command Increment:       0.0001"/0.000040"  0.001mm(40 Millionth)
 Accuracy X,Y,Z Axis (JIS6338):       +0.0002"/12"       +0.005mm Over 300mm
 Repeatability X,Y,Z Axis (JIS6338):  +0.0001"/12"       +0.003mm Over 300mm

Tool Changer (Specifications Change with 50-Taper Option)
 Tool Capacity (40+1):                40 Tool Twin Arm   Chain-Drive
 Tool Shank:                          CAT#40 Taper       CAT#50 Optional
 Tool Change Time:                    4.3 Seconds Tool to Tool
 Tool Diameter / w/adjacent tool:     5.90" / 3.15"      150mm/80mm
 Tool Length/Weight (from gage line): 11.81" / 15 lbs    300mm/7Kg
 Tool Selection/Tool Access           Random             Bi Direction: 

 Coolant Capacity:                    172-Gallons        650 Liters
 Electrical - Connected Load:         36KVA,100mps       220vac+5%, 60hz
 Air Service Requirements:            85 PSI @ 14-scfm
 Machine Dimensions:                  237" x 146" x 142" 570x350x360cm
                                      (Add 52" for Conveyor)
 Machine Weight:                      66,138 lbs         30,000 kg

*Machine Options*

Factory machine installation: "Peace-of-Mind Factory Installation" - Includes

Expenses:                                                $5,995.00

Factory On-Site 3-Day Machine Operation and Program Training - Includes

Expenses:                                                $3,995.00

Belt Type Chip Conveyor w/ 38" Barrel Height Discharge:  $7,990.00

Substitute #40-Taper 8,000 RPM 2-Speed ZF Geared-Head Spindle:

Substitute #50-Taper 6,000 or 8,000 RPM Geard-Head Spindle:

Substitute #50-Taper Direct-Drive 10,000 RPM Spindle:    $14,995.00 

Second-Year Machine Warranty:                            $9,990.00

Voltage Stabilizers/Transformers (Specify Voltage):      POR 

Heidenhain Linear Scales for All 3-Axis:                 $22,495.00

For Collets, Vises, Cutting Tools, Machine Options Etc.
$2500 Tooling Certificate  
$5000 Tooling Certificate  
$10,000 Tooling Certificate  
*See the Genmill Options Brochures for a Complete Listing of Tooling Options*


Lifetime FREE Training:
Ganesh Machinery offers a 3-day training program for

all production CNC machines at our training center. The intense training

program includes basic manual programming, machine setup, operation, and

operator level maintenance for those with a working knowledge in the

programming & setup of CNC machines. Training does not cover CAD/CAM systems

or Manual Guide-i type of programming.  There is no charge for the training

program at Ganesh for our customers.  Turn-key projects and on-site training

are an available option charged at the prevailing hourly rate.  

1 full year Ganesh parts and labor warranty on the machine and 3-

years CNC control & drives.

Service and Parts:
Ganesh or your authorized Ganesh trained servicing dealer

provides installation and service.  Spare parts are stocked at Ganesh in

Chatsworth to support your continued machine operation.

F.O.B. Point: Machines ship F.O.B. Ganesh Machinery from Chatsworth, CA 91311

Payment Terms:

20% down payment with your Purchase Order secures the machine.

70% is due prior to machine shipment, and the 10% balance is due net-30 days

after installation.  Or the machine can be financed with a Ganesh approved

lender.  Leases with $1.00 buyout are available upon approved credit.  

Delivery Schedule: Delivery is stock to 12-weeks, subject to prior sales.

Purchase is governed by the Ganesh Machinery terms and conditions of sale.


Prices and specifications subject to change without prior notice.

Get a Quote

City St ZIP:

How did you hear of us?
Additional information on your request:

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page