40.55"X, 23.62"Y, 25.59"Z, Ganesh Genmill 4024, Mits M830, 12,000 RPM, NEW   Our stock number: 400449

40.55 X, 23.62 Y, 25.59 Z, Ganesh Genmill 4024, Mits M830, 12,000 RPM, NEW

Click on picture below for larger version
40.55 X, 23.62 Y, 25.59 Z, Ganesh Genmill 4024, Mits M830, 12,000 RPM, NEW

All Information From OEM Brochure Should Be Verified By Buyer:

Equipped With:
 12,000 RPM Direct-Drive Beltless Spindle
 Big-Plus Dual-Contact High Performance Precision Spindle
 30-Tool High Speed Twin Arm Tool Changer
 32-GB Solid State Data Server Intergral to CNC Control
 Chip Wash Down Coolant System 
 300 PSI "Through-the-Spindle" Coolant System
 Full Machine Enclosure with Top Covers (precut for exhaust duct)
 Spindle Air Blast by M-Code
 Spindle Oil Cooler - Thermostatically controlled
 Remote Operator MPG Hand wheel
 High Speed Synchronous Rigid Tapping
 Dual LED High-Intensity Worklamps
 6-Thru-Tool-Coolant Pull Studs
 4th & 5th Axis Prewired with a Quick-Disconnect Connectors

Axis Travel
 X-Axis:                              40.55"             1,030mm
 Y-Axis:                              23.62"             600mm
 Z-Axis:                              25.59"             650mm
 Spindle to Rotary Table Surface:     5.11-30.56"        130-775mm
 Spindle Center to Z Way Covers:      22.83"             580mm (Troat)

Table
 Table Size:                          45.66" x 19.68"    1,160mmx500mm
 T-Slot Width (3 T-Slots Total):      18mm               100mm Centers
 Table Load:                          3530 lbs           1600 kgs load

Spindle
 Spindle Motor:                       25 HP S3 Power     20HP 30-Min

 Spindle Speed:                       12,000 RPM         (15,000 Optional)
 Spindle Torque:                      90 ft-lb @ 1,500 RPM
 Tool Type:                           CAT #40 Taper      BT#40 Optional
 Retention System/Holding Capability  BellVille Spring Stack (1650-1760 lbs)
 Spindle Runout:                      <0.000040" TIR
 Spindle Bearings - Rear:             110mm NSK70BNR     2-P4 Class 7 Bearing
 Spindle Bearings - Front:            110mm NSK70BNR     2-P4 Class 7 Bearing
 Retention Knob:                      C40-4502H (Coolant)

Axis Feeds
 Rapid Traverse (X,Y):                1,417 IPM          36m/minute
 Rapid Traverse (Z):                  1,260 IPM          32m/minute
 Cutting Feedrate:                    0.02-393 IPM       10m/minute
 Axis Drive Motor Power (X,Y/Z):      5.0 HP             3.5kw
 Ballscrews (X,Y,Z):                  40mm Ballscrews    12mm Pitch
 Least Input Command Increment:       0.0001"/0.000040"  0.001mm(40 Millionth)
 Accuracy X,Y,Z Axis (JIS6338):       +0.0002"/12"       +0.005mm Over 300mm
 Repeatability X,Y,Z Axis (JIS6338):  +0.0001"/12"       +0.003mm Over 300mm

Tool Changer
 Tool Capacity (30+1):                30 Tool Twin Arm   Chain Drive Rack
 Tool Shank:                          CAT#40 Taper       BT#40 Optional
 Tool Change Time:                    1.7 Seconds Tool to Tool
 Tool Diameter / w/adjacent tool:     5.90" / 3.15"      150mm/80mm
 Tool Length/Weight (from gage line): 11.81" / 15 lbs    300mm/7Kg
 Tool Selection/Tool Access           Random             Bi Direction: 

General
 Coolant Capacity:                    97-Gallons/300 PSI 256 Liters
 Electrical - Connected Load:         50 amps            220vac+5%, 60hz
 Air Service Requirements:            85 PSI @ 14-scfm
 Machine Dimensions:                  115" x 82" x 116"  306x231x256cm
 Machine Weight:                      15,708 lbs         7,120 kg


*Machine Options*

Factory machine installation: "Peace-of-Mind Factory Installation" - Includes

Expenses:                                                $2,995.00

Factory On-Site 3-Day Machine Operation and Program Training - Includes

Expenses:                                                $3,995.00

Belt Type Chip Conveyor w/ 38" Barrel Height Discharge:  $3,990.00

15,000 RPM Spindle Speed Upgrade:                        $5,995.00

40 Tool Chan-Drive Tool Changer Upgrade:                 $9,995.00

Second-Year Machine Warranty:                            $4,990.00

Voltage Stabilizers/Transformers 
(specify voltage needs):                                 POR

1,000 PSI Through-The-Spindle Coolant Upgrade:           $9,995.00

Heidenhain Linear Scales for All 3-Axis - Installed:     $12,495.00

For Collets, Vises, Cutting Tools, Machine Options Etc.
$2500 Tooling Certificate  
$5000 Tooling Certificate  
$10,000 Tooling Certificate  
 
*See the Genmill Options Brochures for a Complete Listing of Tooling Options*

TRAINING & TERMS OF SALE 

Lifetime FREE Training:
Ganesh Machinery offers a 3-day training program for

all production CNC machines at our training center. The intense training

program includes basic manual programming, machine setup, operation, and

operator level maintenance for those with a working knowledge in the

programming & setup of CNC machines. Training does not cover CAD/CAM systems

or Manual Guide-i type of programming.  There is no charge for the training

program at Ganesh for our customers.  Turn-key projects and on-site training

are an available option charged at the prevailing hourly rate.  

Warranty:
1 full year Ganesh parts and labor warranty on the machine and 3-

years CNC control & drives.

Service and Parts:
Ganesh or your authorized Ganesh trained servicing dealer

provides installation and service.  Spare parts are stocked at Ganesh in

Chatsworth to support your continued machine operation.

F.O.B. Point: Machines ship F.O.B. Ganesh Machinery from Chatsworth, CA 91311


Payment Terms:
20% down payment with your Purchase Order secures the machine.

70% is due prior to machine shipment, and the 10% balance is due net-30 days

after installation.  Or the machine can be financed with a Ganesh approved

lender.  Leases with $1.00 buyout are available upon approved credit.  

Delivery Schedule: Delivery is stock to 12-weeks, subject to prior sales.

Purchase is governed by the Ganesh Machinery terms and conditions of sale.

UL & TV ELECTRICAL APPROVAL IS AN AVAILABLE OPTION

Prices and specifications subject to change without prior notice.


Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page