40.55"X, 23.62"Y, 25.59"Z, Ganesh Genmill 4024, Mits M830, 12,000 RPM, NEW   Our stock number: 400449

40.55 X, 23.62 Y, 25.59 Z, Ganesh Genmill 4024, Mits M830, 12,000 RPM, NEW

All Information From OEM Brochure Should Be Verified By Buyer:

Equipped With:
 12,000 RPM Direct-Drive Beltless Spindle
 Big-Plus Dual-Contact High Performance Precision Spindle
 30-Tool High Speed Twin Arm Tool Changer
 32-GB Solid State Data Server Intergral to CNC Control
 Chip Wash Down Coolant System 
 300 PSI "Through-the-Spindle" Coolant System
 Full Machine Enclosure with Top Covers (precut for exhaust duct)
 Spindle Air Blast by M-Code
 Spindle Oil Cooler - Thermostatically controlled
 Remote Operator MPG Hand wheel
 High Speed Synchronous Rigid Tapping
 Dual LED High-Intensity Worklamps
 6-Thru-Tool-Coolant Pull Studs
 4th & 5th Axis Prewired with a Quick-Disconnect Connectors

Axis Travel
 X-Axis:                              40.55"             1,030mm
 Y-Axis:                              23.62"             600mm
 Z-Axis:                              25.59"             650mm
 Spindle to Rotary Table Surface:     5.11-30.56"        130-775mm
 Spindle Center to Z Way Covers:      22.83"             580mm (Troat)

 Table Size:                          45.66" x 19.68"    1,160mmx500mm
 T-Slot Width (3 T-Slots Total):      18mm               100mm Centers
 Table Load:                          3530 lbs           1600 kgs load

 Spindle Motor:                       25 HP S3 Power     20HP 30-Min

 Spindle Speed:                       12,000 RPM         (15,000 Optional)
 Spindle Torque:                      90 ft-lb @ 1,500 RPM
 Tool Type:                           CAT #40 Taper      BT#40 Optional
 Retention System/Holding Capability  BellVille Spring Stack (1650-1760 lbs)
 Spindle Runout:                      <0.000040" TIR
 Spindle Bearings - Rear:             110mm NSK70BNR     2-P4 Class 7 Bearing
 Spindle Bearings - Front:            110mm NSK70BNR     2-P4 Class 7 Bearing
 Retention Knob:                      C40-4502H (Coolant)

Axis Feeds
 Rapid Traverse (X,Y):                1,417 IPM          36m/minute
 Rapid Traverse (Z):                  1,260 IPM          32m/minute
 Cutting Feedrate:                    0.02-393 IPM       10m/minute
 Axis Drive Motor Power (X,Y/Z):      5.0 HP             3.5kw
 Ballscrews (X,Y,Z):                  40mm Ballscrews    12mm Pitch
 Least Input Command Increment:       0.0001"/0.000040"  0.001mm(40 Millionth)
 Accuracy X,Y,Z Axis (JIS6338):       +0.0002"/12"       +0.005mm Over 300mm
 Repeatability X,Y,Z Axis (JIS6338):  +0.0001"/12"       +0.003mm Over 300mm

Tool Changer
 Tool Capacity (30+1):                30 Tool Twin Arm   Chain Drive Rack
 Tool Shank:                          CAT#40 Taper       BT#40 Optional
 Tool Change Time:                    1.7 Seconds Tool to Tool
 Tool Diameter / w/adjacent tool:     5.90" / 3.15"      150mm/80mm
 Tool Length/Weight (from gage line): 11.81" / 15 lbs    300mm/7Kg
 Tool Selection/Tool Access           Random             Bi Direction: 

 Coolant Capacity:                    97-Gallons/300 PSI 256 Liters
 Electrical - Connected Load:         50 amps            220vac+5%, 60hz
 Air Service Requirements:            85 PSI @ 14-scfm
 Machine Dimensions:                  115" x 82" x 116"  306x231x256cm
 Machine Weight:                      15,708 lbs         7,120 kg

*Machine Options*

Factory machine installation: "Peace-of-Mind Factory Installation" - Includes

Expenses:                                                $2,995.00

Factory On-Site 3-Day Machine Operation and Program Training - Includes

Expenses:                                                $3,995.00

Belt Type Chip Conveyor w/ 38" Barrel Height Discharge:  $3,990.00

15,000 RPM Spindle Speed Upgrade:                        $5,995.00

40 Tool Chan-Drive Tool Changer Upgrade:                 $9,995.00

Second-Year Machine Warranty:                            $4,990.00

Voltage Stabilizers/Transformers 
(specify voltage needs):                                 POR

1,000 PSI Through-The-Spindle Coolant Upgrade:           $9,995.00

Heidenhain Linear Scales for All 3-Axis - Installed:     $12,495.00

For Collets, Vises, Cutting Tools, Machine Options Etc.
$2500 Tooling Certificate  
$5000 Tooling Certificate  
$10,000 Tooling Certificate  
*See the Genmill Options Brochures for a Complete Listing of Tooling Options*


Lifetime FREE Training:
Ganesh Machinery offers a 3-day training program for

all production CNC machines at our training center. The intense training

program includes basic manual programming, machine setup, operation, and

operator level maintenance for those with a working knowledge in the

programming & setup of CNC machines. Training does not cover CAD/CAM systems

or Manual Guide-i type of programming.  There is no charge for the training

program at Ganesh for our customers.  Turn-key projects and on-site training

are an available option charged at the prevailing hourly rate.  

1 full year Ganesh parts and labor warranty on the machine and 3-

years CNC control & drives.

Service and Parts:
Ganesh or your authorized Ganesh trained servicing dealer

provides installation and service.  Spare parts are stocked at Ganesh in

Chatsworth to support your continued machine operation.

F.O.B. Point: Machines ship F.O.B. Ganesh Machinery from Chatsworth, CA 91311

Payment Terms:
20% down payment with your Purchase Order secures the machine.

70% is due prior to machine shipment, and the 10% balance is due net-30 days

after installation.  Or the machine can be financed with a Ganesh approved

lender.  Leases with $1.00 buyout are available upon approved credit.  

Delivery Schedule: Delivery is stock to 12-weeks, subject to prior sales.

Purchase is governed by the Ganesh Machinery terms and conditions of sale.


Prices and specifications subject to change without prior notice.

Get a Quote

City St ZIP:

How did you hear of us?
Additional information on your request:

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page