20.08"X, 16.93"Y, 12.99"Z, Ganesh Genmill T-500, Mitsubishi M80, 12,000 RPM   Our stock number: 400435



All Information From OEM Brochure Should Be Verified By Buyer:

Equipped With:
 Heavy Duty Cross Roller Bearing Ways
 Dual Ground, Dual Contact "Big Plus" 12,000 RPM Spindle
 21-Tool, High Speed Tool Changer
 2,362 IPM Rapid Traverse Rates
 32-GB High Speed Data Server for Massive Prgram Memory
 High Speed Synchronous Rigid Tapping
 45 PSI Coolant System for Cutting Tools
 Chip Wash Down Coolant Flushing System
 Air Gun & Coolant Gun
 Full Machine Enclosure Including Top Cover
 Spindle Air Blast by M-Code for Through Spindle & at the Cutting Tool
 Portable MPG Hand Wheel with Magnetic Base
 LED Worklight
 Heat Exchanger for Electrical Cabinet
 Machine Condition Signal Lamp - Tri-Color Stack Lamp
 Automatic Pressurized Centalized Lubrication System
 4th Axis Wiring Pre-Installed
 M30 Automatic Power-Off Turn Off the Circut Breaker

**The Mitsubishi control, motors, and drive package are covered by a 3-year

warranty. The Machine Has a One-Year Warranty**

Axis Travel
 X-Axis:                            20.08"              510mm
 Y-Axis:                            16.93"              430mm
 Z-Axis:                            12.99"              330mm
 Spindle Nose To Table Surface:     5.1"-18.1"          130-460mm
 Spindle Centerline To Column:      18.89"              480mm

Work Table
 Table Surface Dimension (X/Y):     22.04" x 15.75"     560 x 400mm
 T-Slot Dimension/Spacing:          3-14mm Slots        125mm Spacing
 Table Height:                      35" Above Floor     890mm
 Table Weight for Accuracy:         550 lbs             250 KG

Spindle
 Spindle Motor:                     Mitsubishi DJ-D5.5/120-01 - 7.5 HP
 Spindle Motor Coupling:            Inline Direct Drive

 Spindle Speed:                     12,000 RPM          15,000 RPM Optional
 Synchronous Tapping Speed Limit:   6,000 RPM
 Tapping Performance:               M20 x 2.5 Aluminum  M14x2.0 Steel 
 Drilling Performance:              38mm Aluminum       25mm Steel
 Spindle Torque:                    26 ft-lb @ 1500 RPM
 Tool Type:                         BT#30               4 Bearing Spindle
                                                        2 Top - 2 Bottom
 Spindle Bearing - Inner Diameter:  40mm                P4 Class
                                                        7 Steel Ball Bearings
 Spindle Material / Hardness:       SCM415              HRC 58-62
 Retention System / Holding:        MAS-P30T-1          Bellville Spring Stack

                                                        1650-1760 lbs

 Spindle Runout:                    <0.000040" TIR / Pull Stud USST B30-4500H


Axis Feeds (X/Y/Z)
 Rapid Traverse:                    2,362 IPM           60/60/60m/minute
 Rated Cutting Feedrate:            0.04 - 1181 IPM     30/30/30m/minute

 Mechanical Way System:             Roller Bearing Ways Roller Ways 30/30/35mm

 Axis Drive Motor Power:            2 HP /3 HP          1.5 kw/2.2 kw w/ Brake

 Axis Thrust Force:                 3,335lbs/3,692lbs   14840 N/16430 N
 Ballscrews:                        32mm                16mm Pitch

 Positioning Accuracy:              +0.00015"           +0.004mm

 Positioning Reapeatability:        +0.00008"           +0.002mm
 Least Input Command Increment:     0.0001" / 0.000040" 0.001mm 40 Millionths


Tool Changer
 Tool Capacity:                     21-Tools            Drum turret
 Tool Shank:                        BT#30               MAS P30T-1 Pull Stud
 Tool Change Time:                  1.6 Sec             Servo Motor Driven
 Tool Diameter with Adjacent Tool:  2.36"/3.15"         60mm/80mm w/No Tool
 Tool Length / Max. Tool Weight:    7.87"/6.6 lbs       200mm/ 3 kg
 Tool Selection / Tool Access:      Random              Bi-Directional

General
 Air Service Requirements:          85 psi @ 5 scfm     6 kg/cm2
 Electrical Requirements:           16kva, 40 Apms      22vac+5%, 60hz 
 Coolant Pump - Chip Flush Pump:    1.0 HP              .75kw
 Cutting Tools - HP / Pressure:     1.0 HP / 45 PSI     .75kw
 Coolant Tank Capacity:             32 Gallons          120 Liters
 Machine Dimesnions:                50"x87"x95"         125x221x241 cm
 Machine Weight:                    6,110 lbs           2,770 kg

Genmill T-500 Machine Options
 Factory machine installation: "Peace-of-Mind Factory Installation"
*Includes Expenses*:                                    $2,995.00

 Factory on-site 3-day machine operation and program training

*Includes Expenses*:                                    $3,995.00

 Automatic Operator Door:                               $2,995.00
 Belt-Style Rear Discharge Chip Conveyor:               $2,995.00
 Auger-Style Chip Conveyor:                             $1,990.00
 15,000 RPM Spindle Speed Upgrade:                      $5,995.00
 Second-Year Machine Warranty:                          $2,995.00
 Voltage Stabilizers and Transformers 
(specify voltage needs):                                POR

 Air Conditioner for Electrical Cabinet 
Refrigerated-Style,Upgrade Over Standard Heat Exchanger:$1,990.00

 375 PSI Through-The-Spindle-Coolant Prep:              $4,995.00

 375 PSI Through-The-Spindle-Coolant Upgrade 
(25-Bar - No Additional Coolant Tank Supplied:          $9,995.00


 Linear Scales For All 3-Axis
Heidenhain5um Optical Liner Scales:                    $13,995.00

Tooling Certificates:
 For Collets, Vises, Cutting Tools, Machine Options Etc.
 $2500 Tooling Certificate  
 $5000 Tooling Certificate  
 $10,000 Tooling Certificate  

*See the Genmill Options Brochures for a Complete Listing of Tooling Options*



Lifetime FREE Training:
Ganesh Machinery offers a 3-day training program for

all production CNC machines at our training center. The intense training

program includes basic manual programming, machine setup, operation, and

operator level maintenance for those with a working knowledge in the

programming & setup of CNC machines. Training does not cover CAD/CAM systems

or Manual Guide-i type of programming.  There is no charge for the training

program at Ganesh for our customers.  Turn-key projects and on-site training

are an available option charged at the prevailing hourly rate.  

Warranty:
1 full year Ganesh parts and labor warranty on the machine and 3-

years CNC control & drives.

Service and Parts:
Ganesh or your authorized Ganesh trained servicing dealer

provides installation and service.  Spare parts are stocked at Ganesh in

Chatsworth to support your continued machine operation.

F.O.B. Point:
Machines ship F.O.B. Ganesh Machinery from Chatsworth, CA 91311


Payment Terms:

20% down payment with your Purchase Order secures the machine.

70% is due prior to machine shipment, and the 10% balance is due net-30 days

after installation.  Or the machine can be financed with a Ganesh approved

lender.  Leases with $1.00 buyout are available upon approved credit.  

Delivery Schedule: Delivery is stock to 12-weeks, subject to prior sales.

Purchase is governed by the Ganesh Machinery terms and conditions of sale.

UL & TV ELECTRICAL APPROVAL IS AN AVAILABLE OPTION

Prices and specifications subject to change without prior notice.



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page