3/4" TSUGAMI BS20BII, Fanuc LH-1, 1998, C-Axis, Sub, Rhino Bar   Our stock number: 400406

3/4 TSUGAMI BS20BII, Fanuc LH-1, 1998, C-Axis, Sub, Rhino Bar

Click on picture below for larger version
3/4 TSUGAMI BS20BII, Fanuc LH-1, 1998, C-Axis, Sub, Rhino Bar3/4 TSUGAMI BS20BII, Fanuc LH-1, 1998, C-Axis, Sub, Rhino Bar

To View A Video Demonstration of This Machine, Use The Link Below.


General Specifications per Brochure:
(Specifics to be confirmed by buyer)

Equipped With: 
   Lexaire 1.62 Rhinobar 
   Royal FilterMist 
   Tool Presetting 
   Auto Tool Touch Off 
   Parts Catcher
   Bushing Blaster for chip control 
   Tool Nose Radius Comp 
   Rigid Tapping
   Canned Drilling Cycles 
   Bar Feed Interface 
   Background Editing 
   Multiple Repetitive Cycles
   3 HP Flood Coolant
   Tower Light 

General Specifications:

CNC Control:                                Fanuc LH-1 (18i-TA)
Maximum Bar Diameter:                       3/4"
Z1-Axis Travel:                             8.21"
Main Spindle
   Spindle Speed:                           200 to 8,000 RPM
   Indexing:                                C-Axis
   C-Axis Increment:                        0.001 Degree
Number of Tool Stations:                    6 OD, 4 ID, 3 ID/OD BW Tools
                                            4 Cross Driven Tools
Tooling Sizes, OD Turning:                  5/8" Square
Programmable Servo Axis Designations:
   Z1 Main Headstock In and Out:            8.21"
   T1 OD Tool Slide Up and Down:            5.90"
   X1 OD Tool Slide Right and Left:         2.00"
   X2 ID Tool Slide Up and Down:            7.90"
   Auxiliary Slide Motion:
   Z2 I.D. Tool Slide In and Out
    (Synchronous to Z1):                    7.88"
Sub-Spindle Specifications:
   Maximum Diameter:                        0.787"
   Maximum Drill Capacity - Mild Steel:     3/8"
   Maximum Tap Capacity - Mild Steel:       5/16"
   Speed Range (Serial Interface):          200 to 7,000 RPM
   Power Rating:                            3.0 HP
   Sub-Spindle Indexing:                    15 Degree increment
Part ejection:                              front or rear ejection
Horsepower of Main Spindle:                 5.0 HP
Driven Tool Drive Motor Rating:             1.5 HP
Maximum Speed Cross Tool T10-T12:           200-5,000 RPM
Maximum Speed Cross Tool T13:               120-3,000 RPM 
Offset From Guide Bushing T10 & T11:        0.472"  (.397 max. shank)
Offset From Guide Bushing T12:              0.965"  (.511 max. shank)

Tsugami BS20BII 98" x 51" x 75" 5,500 lbs
HPC Pump 29" x 16" x 16" 100 lbs
Chip Pan w/HPC Filter 50" x 44" x 23" 250 lbs

Get a Quote

City St ZIP:

How did you hear of us?
Additional information on your request:

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page