1/2", TSUGAMI, BO126III, FANUC 31iTB, 2015, HPC, Chip Cnvyr, Edge Scout, Low Hrs   Our stock number: 397276

1/2 , TSUGAMI, BO126III, FANUC 31iTB, 2015, HPC, Chip Cnvyr, Edge Scout, Low Hrs

Click on picture below for larger version
1/2 , TSUGAMI, BO126III, FANUC 31iTB, 2015, HPC, Chip Cnvyr, Edge Scout, Low Hrs1/2 , TSUGAMI, BO126III, FANUC 31iTB, 2015, HPC, Chip Cnvyr, Edge Scout, Low Hrs1/2 , TSUGAMI, BO126III, FANUC 31iTB, 2015, HPC, Chip Cnvyr, Edge Scout, Low Hrs1/2 , TSUGAMI, BO126III, FANUC 31iTB, 2015, HPC, Chip Cnvyr, Edge Scout, Low Hrs
1/2 , TSUGAMI, BO126III, FANUC 31iTB, 2015, HPC, Chip Cnvyr, Edge Scout, Low Hrs1/2 , TSUGAMI, BO126III, FANUC 31iTB, 2015, HPC, Chip Cnvyr, Edge Scout, Low Hrs1/2 , TSUGAMI, BO126III, FANUC 31iTB, 2015, HPC, Chip Cnvyr, Edge Scout, Low Hrs1/2 , TSUGAMI, BO126III, FANUC 31iTB, 2015, HPC, Chip Cnvyr, Edge Scout, Low Hrs

Click the link below to view a video demonstration of this machine
https://youtu.be/xN_5bGeWV9I

All details to be confirmed by the buyer

Equipped With:
    Edge Scout Magazine Bar Feed, New 2016  
    Axial Shift for Scout Bar Feed
    LNS Turbo MH500 Chip Conveyor
    MP Systems V-2 Swiss High Pressure Coolant System, 2000 psi
    Trimist 850 Mist Collector
    Part Conveyor
    Part Catcher
    Guide Bushing & Chucker Kit

Power on: 3607 hours
Run Time: 1377 hours
Cut Time:  506 hours

Cut mostly brass and some copper.


General Specifications per Manufacturer

Control:                                         Fanuc 31iTB
Maximum Bar Stock:                               12 mm / 0.47" 
# Axes:                                          6 
Rotary Axis:                                     Main Spindle Full "C" 
                                                 Back Spindle 1 degree
Sliding Headstock / Guide Bushing:               YES 
CONVERTIBLE: Run w/o Guide Bushing (chucker):    YES 
Max  Length: with Guide Bushing:                 210mm / 8.26"
Max Length: w/o Guide Bushing:                   45 mm / 1.77"
# Tool Positions (std / max):                    25 (std) 
# Live Tool Positions (std / max):               Varies by options 
Main Spindle  Speed:                             200 - 12,000 rpm 
Sub Spindle Speed:                               200 - 12,000 rpm 
Live Tool Speed:                                 8,000 rpm 
Main Spindle Motor:                              1.5  / 2.2 kW 
Back Spindle Motor:                              1.5 / 2.2kW
Axis:                                            0.5 kW (X1,X2,Y1,Y2,Z1,Z2)
Cross Drill:                                     0.75 kW (option)
Coolant Pump:                                    0.25 kW
Lubricating Oil Pump:                            3 W
Power Source Requirement:                        11 kVA
Compressed Air Requirement:                      0.4 Mpa or above
Air Discharge Rate:                              50 NL/min
Coolant Tank Capacity:                           120 L
Weight:                                          2,050 kg / 4,520 lbs. 
Footprint: W x D x H:                            1,655 mm x 1,125 mmx 1,700 mm
                                                 65.2" x 44.3" x 66.9"  

Key Advantages Include:

 - Enhanced 6-axis Swiss Style Lathe at minimal investment cost
 - Y2 Axis added to Back Tool Post enables multiple back milling operations

plus simultaneous operation of main and sub spindles. 
 - 25 Total Tool Positions include multiple rotary and fixed tool

configurations; 2,3, or 4 spindle Cross Drill Option and tooling
 - Back Milling Operations enable back slotting, back end milling, back cross

drilling/tapping
 - 210 mm stroke, 45 mm when used in chucker mode
 - Rapid Traverse Rate of 32m/min shortens idle and cycle times
 - Enriched NC Functions Standard - tool nose radius compensation, chamfering

and corner rounding and cutoff detection, plus many more.

 

Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page