.059' - 1/2"Dia, EDGE RANGER 112, 12', for Sliding or Fixed Headstock   Our stock number: 399126

.059' - 1/2 Dia, EDGE RANGER 112, 12', for Sliding or Fixed Headstock

The Ranger 112 is an Automatic Magazine style Bar Feeder designed for feeding

round, square and hexagonal bar stock in lengths up to 12'5", in a diameter

range of 1.5-15mm, into CNC lathes.

The Ranger 112 comes equipped with a Mistubishi controller and belt drive

standard. It also features dual anti-vibration devices that stabilize the bar

stock at two critical points between the guide channel and lathe spindle

maximizing RPM potential. The polyurethane guide channels increase strength

and stability.




General Specifications from Manufacturer

All Specifications and Prices are subject to change without notice

Control:                               Mitsubishi motion control
Bar Diameter Capacity
   No Bar Preparation:                 1.5 mm to 12.7 mm (.059" to .500")
   With Bar Prep or front eject        1.5 mm to 12.7 mm (.059" to .594")
Maximum Bar Length:                    3800mm (12'5")
Minimum Bar Length:                    420mm (16.54")
Scroll Capacity:                       16 bars
Bar Loading Cycle Time:                35 seconds for 12' bars
Pusher Style:                          Double Pusher
Channel Style:                         Polyurethane Quick Change

Material Straightness Spec:            .007" TIR/foot of material
                                       (V Blocks. 3 points equidistance)

Feed Force (pusher Torque):            Max 450N Adjustable
Forward feed rate:                     1400 mm/sec max, adjustable
Return feed rate:                      2360mm/sec max, adjustable


Power Consumption:                     1.5 KW/2KVA
Operating Voltage:                     230V/60Hz 3-Phase
Control Voltage:                       24V DC

Oil Capacity:                          46 Liters (12 gallons)
Oil Viscosi8ty:                        ISO 100 cST
Compressed Air Suppluy:                0.6 MPA (6 bar) - 90 psi

Machine Weight (without oil):          1250 lbs
Dimension (Approx):                    181" x 24" x 49"


Guide channel chart

Channel  Pusher    Min Bar             Max Bar             Max Diam w/ Frnt 
Diam     Diam      Size                Size                Eject or Bar End
                                                           Prep
----------------------------------------------------------------------------
8 mm     7.5 mm    1.5 mm (.059")      6.4 mm (.250")      7 mm (.275")
11 mm    10 mm     3 mm (.118")        9 mm (.354")        10 mm (.393")
14 mm    12 mm     3.2 mm (.125")      11 mm (.437")       13 mm (.512")
16 mm    15 mm     5 mm (.196")        12.7 mm (.500")     15 mm (.594")

Standard Features:

 - (1) Guide channel set to be chosen by customer. Several sizes to choose

from, each handling a specific stock range. See chart below (spindle liner

required if channel set is not lathe's max capacity)
 - (1) Standard telescoping front nose matched to the guide channel set
 - (1) O.D. bar stock collet (to be chosen by customer, specific collet needed

for each stock diameter)
 - Swiss headstock synchronization device
 - Automatic remnant retraction, self centering gripper
 - Custom lathe cable and interface plugs


Optional:

(2) Guide channel Package:                                 $24,900
Installation (USA)                                         $ 3,300

Additional Guide Channels"                                 $ 2,350
Spindle Liner:                                             $   420
Bar Stock Collets                                          $    90
Movable Antivibration Devise 
   Bushing Blocks (2-28mm) two set reqd                    $   110 ea
High Voltage Kit (required fro some lathes)                $ 1,500
Axial Shift with Safety Switches:                          $ 1,500



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page