Ganesh, GenTurn 52BY2, MITS M720, 2", MillTurn, 9-Axis, B-Axis, Double Y-Axis   Our stock number: 398725

Ganesh, GenTurn 52BY2, MITS M720, 2 , MillTurn, 9-Axis, B-Axis, Double Y-Axis

General Specifications As Per Brochure 
(Buyers are responsible for confirming all details below)

Equipped With:
    2" Bar Capacity
    15 HP Dual Opposing Spindles
    B-Axis & Dual Y-Axis for both Front and Backworking
    36 Tool Positions w/ 18 Driven tools, 12 for B-Axis

Specifications:

MAIN SPINDLE                                INTEGRAL BUILT-IN MOTOR SPINDLE
    Maximum bar diameter:                   2.008"
    Spindle Nose:                           A2-5
    Collet size:                            Traub TRB-52

    Maximum spindle speed:                  6,000 RPM
    Servo Spindle motor horsepower:         15-HP peak, 10-HP 30-min. rated
X1, Y1, Z1 AXIS
    X1, Y1, Z1 axis servo motor:            X1-1.3 hp Y1/Z1-2.0 hp
    X1 axis travel:                         10.63"
    Y1 axis travel:                         18.11"
    Z1 axis travel:                         9.84"
    Minimum programmable input:             0.00004" resolution
    X1, Y1, Z1 rapid travel rate:           1181 IPM (30m/min)
MAIN SPINDLE TOOLING
    Number of driven tools:                 6 axial and 6 radial driven
    Driven tool motor power:                5-HP
    Driven tool spindle speed:              6,000 RPM
    Driven tool collet size                 ER-20 (up to 1/2" tool shank)
    O.D. turning tools                      5-20mm O.D.  holders available
    I.D. boring tools                       5-25mm I.D. bores available
SUB SPINDLE
    Type:                                   INTEGRAL BUILT-IN MOTOR SPINDLE
    Maximum bar diameter:                   2.008"
    Collet size:                            Traub TRB-52
    Maximum spindle speed:                  6,000 RPM
    Servo Spindle motor horsepower          15-HP peak, 10-HP 30-min. rated
X2, Y2, Z2 AXIS
    X2, Y2, Z2 axis servo motor:            X2/Z2-1.3 hp/Y2-2.0 hp
    X2 axis travel:                         18.89"
    Y2 axis travel:                         18.11"
    Z2 axis travel:                         10.63"
    X2, Y2, Z2 rapid travel rate:           1181 IPM (30m/min)
    Minimum programmable input:             0.0001"
SUB SPINDLE TOOLING
    Number of axial driven tools:           3 axial, uses ER-20 collets
    Number of radial driven tools:          3 radial, uses ER-20 collets
    Driven tool motor power:                2.7-HP (2.0kw)
    Driven tool spindle speed:              6,000 RPM
    Driven tool collet size:                ER-20 (up to 1/2" tool shank)
    O.D. turning tools:                     4-20mm O.D. holders available
    I.D. boring tools:                      #4 - 25mm I.D. bores available
COOLANT SYSTEM - 300 PSI                    
    Size:                                   80 Gallon tank,
    Pumps:                                  3 pumps with flow control
ELECTRICAL REQUIREMENT                      110-Amps,42kva,220 vac, 3 Phase
    AIR REQUIREMENTS:                       85 psi, 20-cfm
    MACHINE WEIGHT:                         12,345 LBS
    MACHINE DIMENSIONS:                     142" x 85" x 82" w/ chip conveyor

Options:
GenTurn 52-BY2 9-Axis Mill/Turn Center $199,990.00 
9-Axis Turning Center with B-Axis, and both Dual "Y" Axis & "C" Axis,

including: 
2-Traub-52 "Dead-Length" collet chucks. Automatic power shut-down. 
36-Tool positions including 18-Driven Tools with ER-20 collet spindles

included, 
Parts catcher with parts conveyor, chip conveyor, fluorescent worklight 
Barloader interface, headwall air blast and coolant outlets for main and sub

spindle, 
Sub-Spindle programmable air blast, oil flush, and finished parts ejector 
215 PSI High-Pressure coolant pump for cutting tools with coolant flow sensor

monitor. 
Dual 1-HP coolant pumps for headwall & chip flush with coolant flow sensor

monitoring. 

GenTurn 52-BY2 9-Axis Mill/Turn Center Production 
Package 
PRODUCTION PACKAGE PRICE: $214,990.00 
As listed above plus Short Bar Loader Installed at your facility, + 1-Spindle

Liner, & Coolant Collector 

HIGH PRODUCTION PACKAGE PRICE: $229,990.00 
- With EDGE Patriot 551 Automatic 12' Bar Loader w/ Spindle Liner. Installed

at your facility



FOR MORE INFORMATION PLEASE CONTACT Automatics & Machinery.



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page