Tecno Wasino G07, 1.5" bar, Gang-tool, Fanuc 21iTB, 2005, LOW HRS, Gantry   Our stock number: 398671

Tecno Wasino G07, 1.5 bar, Gang-tool, Fanuc 21iTB, 2005, LOW HRS, Gantry

Click on picture below for larger version
Tecno Wasino G07, 1.5 bar, Gang-tool, Fanuc 21iTB, 2005, LOW HRS, GantryTecno Wasino G07, 1.5 bar, Gang-tool, Fanuc 21iTB, 2005, LOW HRS, GantryTecno Wasino G07, 1.5 bar, Gang-tool, Fanuc 21iTB, 2005, LOW HRS, Gantry
Tecno Wasino G07, 1.5 bar, Gang-tool, Fanuc 21iTB, 2005, LOW HRS, GantryTecno Wasino G07, 1.5 bar, Gang-tool, Fanuc 21iTB, 2005, LOW HRS, Gantry

General Specifications As Per Brochure (buyer to verify details)

To view a video demonstration of this machine, copy any paste the link below.
https://www.youtube.com/watch?v=NuCW58rZFzQ&feature=youtu.be

Equipped With:
  Fanuc Series 21i-TB Control
  S Robo-7 Gantry Loader 
  Coolblaster 2000 PSI High pressure pump
  Mist collector 
  Wasino NC Bar32 Bar Loader, 3ft cap. 

Hours
  Power on ............... 23191 hours
  Operating Time .........  4269 hours
  Cut Time ...............  6069 hours


Capacity:
  Maximum Swing Dia:                     11-7/32"
  Nominal workpiece D x L:               3-15/16" x 3-15/16"
  Bar Capacity:                          1-1/2"
Head Stock:
  Center height from floor:              39-3/8"
  Spindle nose:                          3-15/16" Flat
  Spindle bore:                          1-3/4"
  Spindle front bearing ID:              2-15/16"
  Spindle speeds:                        6000 RPM; Infinitely Variable 
  Standard Chuck:                        Thru hole hydralic chuck 
Feed Axes:
  X-axis (cross slide) travel:           18-29/32
  Z-axis (carriage) travel:              11-7/32"
  X-axis rapid traverse speed:           m/min (fpm) 12 (30.4)
  Z-axis rapid traverse speed:           m/min (fpm) 20 (65.6)
Tool Table:
  Tooling type:                          Gang Type
  Standard tool shank:                   5/8"
  Max boring holder dia.:                25/32" (1") ---*2
  Spindle Motor output:                  5/7.5 HP
Power Supply:

  Voltage, frequency:                    AC200/200 -15%, +10%
                                         50/60 Hz +/- 1 Hz
  Power supply capacity:                 13 KVA

Power on - 23191 hours
Operating Time - 4269 hours
Cut Time - 6069 hours

Dimensions of Machine (approx.):         55" x 68" x65-3/4"
Machine gross weight (approx.):          3850 lbs



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page