Ganesh Cyclone 52TTMY, 6"Chk, 2" bar, 2013, 8 Axis, Twin Turret,Twin Spindle   Our stock number: 392765

Ganesh Cyclone 52TTMY, 6 Chk, 2 bar, 2013, 8 Axis, Twin Turret,Twin Spindle

Click on picture below for larger version
Ganesh Cyclone 52TTMY, 6 Chk, 2 bar, 2013, 8 Axis, Twin Turret,Twin SpindleGanesh Cyclone 52TTMY, 6 Chk, 2 bar, 2013, 8 Axis, Twin Turret,Twin SpindleGanesh Cyclone 52TTMY, 6 Chk, 2 bar, 2013, 8 Axis, Twin Turret,Twin SpindleGanesh Cyclone 52TTMY, 6 Chk, 2 bar, 2013, 8 Axis, Twin Turret,Twin Spindle
Ganesh Cyclone 52TTMY, 6 Chk, 2 bar, 2013, 8 Axis, Twin Turret,Twin SpindleGanesh Cyclone 52TTMY, 6 Chk, 2 bar, 2013, 8 Axis, Twin Turret,Twin SpindleGanesh Cyclone 52TTMY, 6 Chk, 2 bar, 2013, 8 Axis, Twin Turret,Twin Spindle

General Specifications As Per Brochure
CNC Control                                     Mitsubishi M720 
                                                64-bit Risc CPU running at
                                                135,000 Blocks/min & 680 Block
                                                Look-ahead......
CAPACITY
   Turning Diameter,Max                         7.48" (190 mm) 
   Standard                                     6.7" (170mm) 
   Turning length                               15.75" (400mm) 
   Center distance                              36.22" (920mm) 

MAIN SPINDLE / SUBSPINDLE
   Identical Mitsubishi Integral Spindles
   Spindle nose / Bearing Diameter              A2-5
   Spindle Bar Capacity                         2.0" (51 mm)
   Chuck Size                                   6"
   Spindle Center Height                        46.45" (1,180mm)
   Maximum spindle speed                        60-6,000 RPM 
   Integral Spindles (4,000 RPM Hi-Torque option)
   Spindle Motor                                20hp peak, 15hp 
                                                (30-minute duty rating)

LIVE TOOL TURRETS 
   Dual 16-Station Live Tool Turrets
   Number of turret stations                    16 x 2
                                                32 (Any combination of 32 ID
                                                OD or Live tool stations)
   Index time (adjacent tool / 180 deg index)
   0.2 seconds / 1.2 seconds High-Speed Servo Indexing
   Tool Size / Collet Size                      25mm for square tool and round tool) / ER-32

Y axis travel 2.75" of travel - 1.378" off of centerline ( 35mm)

Y axis Rapid Feed Rate                          236 Inch Per Minute (6m per minute)

"C" AXIS
   Spindle Radial Resolution
   0.001
   360,000 radial positions with full contouring capability

"B" AXIS (sub spindle travel)
   Distance Between Spindles                    36" (914mm)
   B Axis Rapid Traverse Rate                   1,573 IPM
   B Axis Travel                                25.59" (650mm)

AXIS SPECIFICATIONS
   Axis Travel                                  X1 5.9", X2 9.05"
   Axis Travel                                  Z1 17.32", Z2 17.32"
   Rapid Travers Rate                           630 ipm (16 m/minute)
   Rapid Travers Rate                           1,574 ipm (40 m/minute)

FLUID CAPACITY
   Hydraulic System

   10.5 gallons (40 Liters) with 3-HP (2.2kw) pump motor
   Coolant Pumps - Dual Coolant Pumps
   2x 1.7 hp pumps for tooling & 1 pump for coolant flushing
   Coolant Tank 70-gallon (280 Liters) coolant tank

Machine Weight                                  22,707lbs (10,300 kgs)

Electrical Requirement 49.5KVA (220VAC  5%, 3-phase, 60 Hz, 131 amps)

Air Requirement 71-psi @ 8-cfm for parts catcher, ejector, oil mist lubricator

Machine Demensions                              167" x 88" x 79"


Machine is complete with the "Ganesh Productivity Package" including:
Edge 551 12' Hydraulic Automatic Magazine-type Bar Loader 
8-Axis Mill / Turn Center with a true linear "Y"-Axis
Dual 16-Station Live Tool Turrets with 32-Driven Tool Stations
Finished Parts Pick-Off Unit with Parts Conveyor, Barloader Interface
Headwall air blast and coolant outlets for main and subspindle & through-the-

turret coolant supply
Dual 4-amp coolant pumps with coolant flow sensor monitoring
Choice of a Traub-52 "Dead-Length" collet chuck or 6" 3-jaw hydraulic chuck

for each spindle
25-Static BMT-65 Toolholders (as shown on top of tooling page)
Steel Belt High-Discharge Chip Conveyor (42" Barrel height with "air-curtain"

clean-off feature)
Start-Up Tool Package: 4-angle & 4-straight driven tool holders

There are approximately 12 Live tools holds including ratary Face, Cross,

Adjustible Angle, etc and fixed ID & OD Tool Blocks.

Note: this machine is in near new condition



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page