10" x 20", Acer Supra-1020AHD,Incremental Dwnfd.,5HP.,Microprocessor Ctrl.,2011   Our stock number: 392631

10 x 20 , Acer Supra-1020AHD,Incremental Dwnfd.,5HP.,Microprocessor Ctrl.,2011

Click on picture below for larger version
10 x 20 , Acer Supra-1020AHD,Incremental Dwnfd.,5HP.,Microprocessor Ctrl.,201110 x 20 , Acer Supra-1020AHD,Incremental Dwnfd.,5HP.,Microprocessor Ctrl.,201110 x 20 , Acer Supra-1020AHD,Incremental Dwnfd.,5HP.,Microprocessor Ctrl.,201110 x 20 , Acer Supra-1020AHD,Incremental Dwnfd.,5HP.,Microprocessor Ctrl.,2011
10 x 20 , Acer Supra-1020AHD,Incremental Dwnfd.,5HP.,Microprocessor Ctrl.,201110 x 20 , Acer Supra-1020AHD,Incremental Dwnfd.,5HP.,Microprocessor Ctrl.,201110 x 20 , Acer Supra-1020AHD,Incremental Dwnfd.,5HP.,Microprocessor Ctrl.,201110 x 20 , Acer Supra-1020AHD,Incremental Dwnfd.,5HP.,Microprocessor Ctrl.,2011

General Specifications As Per Brochure (Buyers are responsible for confirming

all details below)


Equipped With:
    Sensor Triggering Directional Control Valve
    Two Speed Rapid Elevation Travel
    Table Speed is Adjusted w/ Flow-Control Turning Knob
    Electronic Saddle Lock Device
    Recirculating Auto Lube System for all Slideways and Leadscrews
    Super-Precision Direct Drive Spindle

SPECIFICATIONS:
    Table Size:                             10" X 20"
    Work Load - Maximum:                    840 Lbs.
    Grinding Capacity - Maximum:            11" X 20"
    Longitudinal Table Travel - Hydraulic:  23-1/5"
    Longitudinal Table Travel - Manual:     24-4/5"
    Crossfeed Travel - Automatic Maximum:   10-3/5"
    Crossfeed Travel - Manual Maximum:      11-3/4"
    Automatic Crossfeed Increment:          0.02" - 0.5"
    Crossfeed Handwheel - Per Graduation:   0.001"
    Crossfeed Handwheel - Per Revolution:   0.2"
    Spindle Center to Table:                22-3/4"
    Table Speed (Variable):                 16 - 80 FPM
    Incremental Downfeed - Auto:            0.00005" - 0.002"
    Wheelhead Step Feed:                    0.00005"
    Wheelhead Handwheel - Revolution:       .05"
    Wheelhead Handwheel - Graduation:       0.0005"
    Rapid Traverse Rate:                    150 mm/min
    Slow Traverse Rate:                     6 mm/min
    Standard Grinding Wheel:                12" X 1-1/4" X 3" 
    Spindle Motor:                          3 HP / 3,450 RPM
    Hydraulic Motor:                        1 HP
    Elevating Motor:                        1/8 HP
    Crossfeed Motor:                        80 W
    Electrics:                              230-460V / 3 Phase / 60Hz
    Approximate Dimensions:                 85"L X 73"W X 80"H
    Approximate Weight:                     4,600 Lbs.



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page