21"X, 12.5"Y, 14"Z, CHIRON FZ12KS SwivelHead, 24K RPM, in-service 2010   Our stock number: 390981

21 X, 12.5 Y, 14 Z, CHIRON FZ12KS SwivelHead, 24K RPM, in-service 2010

Click on picture below for larger version
21 X, 12.5 Y, 14 Z, CHIRON FZ12KS SwivelHead, 24K RPM, in-service 201021 X, 12.5 Y, 14 Z, CHIRON FZ12KS SwivelHead, 24K RPM, in-service 201021 X, 12.5 Y, 14 Z, CHIRON FZ12KS SwivelHead, 24K RPM, in-service 201021 X, 12.5 Y, 14 Z, CHIRON FZ12KS SwivelHead, 24K RPM, in-service 2010
21 X, 12.5 Y, 14 Z, CHIRON FZ12KS SwivelHead, 24K RPM, in-service 201021 X, 12.5 Y, 14 Z, CHIRON FZ12KS SwivelHead, 24K RPM, in-service 201021 X, 12.5 Y, 14 Z, CHIRON FZ12KS SwivelHead, 24K RPM, in-service 201021 X, 12.5 Y, 14 Z, CHIRON FZ12KS SwivelHead, 24K RPM, in-service 2010

This machine has been very well maintained and by Chiron Service. Recently

removed from service.

Major services: replaced the X & Y axis ball-screw assemblies (bearings, nut

and screws), replaced the Siemens PCU (computer), a float switch recall was

performed, as well as, replacing the comment closer. Spindle is ok but may

need to be rebuilt as well as the Z-axis Ball Screw.  Customer has kept all

records of preventative maintenance and repairs.  

Click the link below to view a video demonstration of this machine
https://www.youtube.com/watch?v=Y_zVYMwglpk


General Specifications As Per OEM Brochure 
(Buyers must confirm all details)

Equipped With:

   47 Tool Pockets 
   24,000 RPM Spindle
   Thru the Tool Coolant
   Fixture for Rotary Table
   Fixture Flush & Flow Control for fixture washing)
   Hydraulic Clamping Package, w/ HZS 110-Z vice
   Machine Table w/ 2 mounting surfaces
   Milling from Bar
   Siemens 840D Controller
   Renishaw probe/package OMP 40-2LS 
   Chiron Lasercontrol 40
   Firetrace Fire Suppression System
   Knoll 1,000 PSI (70 Bar) High Pressure Pump
   NCU 573.5 Up to 12 Measuring Circuits for 3D Curves
   Barfeed Interface (for left side feed)*
   2.5" (65mm) Spindle capacity @ 4500 RPM
   Acceleration from 0 to 12,000 rpm, or 
    deceleration 12,000 to 0 rpm, in 0.6 seconds
   Y-axis Travel of 400mm (16")
   Transformer (almost new), step up/down 208VAC / 480VAC
   Chip Conveyor
   Mist Collector
    
Specifications:

   X axis                                   21.65"
   Y axis                                   12.6"
   Z axis                                   14.17"
   Tool Taper                               HSK-A50
   Number of Tools                          48
   Motor:                                   32hp
   Tool Change Time Approx                  0.9 Sec
   Rapid traverse in X, Y and Z axes        75 m/min
   Glass Scales:                            All Axes
   Swiveling range:                         -10deg to +100 deg, 
                                            0-90 deg in 0.5 sec

Note: Barfeed in photos NOT included; New/Used barfeed available... POR

Machine Chiron's actual "Build Sheet" shows a price of $564,280
Location: West Coast



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page