"NEW" GANESH VFM-2416, 24.01"X, 15.75"Y, 17.72"Z,12,000 RPM,4th & 5th Axis Wired   Our stock number: 351034

NEW GANESH VFM-2416, 24.01 X, 15.75 Y, 17.72 Z,12,000 RPM,4th & 5th Axis Wired

Click on picture below for larger version
NEW GANESH VFM-2416, 24.01 X, 15.75 Y, 17.72 Z,12,000 RPM,4th & 5th Axis Wired

Click the link below to view a video demonstration of this machine

  12,000 RPM Inline Direct-Drive Beltless Spindle
  Big-Plus Dual Contact High-Performance Precision Ground Spindle
  1,417 IPM Rapid Rates In X & Y Axis For Fast Production
  20 Tool High Speed Twin Arm Tool Changer - CAT or BT#40 Tooling
  300 PSI Through The Spindle Coolant System w/Rotary Coupling
  4th & 5th Axis Wiring Included With The Machine

General Specifications As Per Brochure (must be verified by buyer):


X-Travel:                                24.01"/610MM
Y-Travel:                                15.75"/400MM
Z-Travel:                                17.72"/400MM
Spindle Nose to Table Surface:           5.11" - 22.83"/130 - 580MM
Spindle Center to Z-Axis Way Covers:     15.35"/390MM (throat dimension)

Table Size (LxW):                        25.59" x 15.75"/650MM x 400MM
T-slot Width (3 T-Slots Total):          18MM on 100MM Centers
Max. Table Load:                         882 lbs/400 kgs

Spindle Motor - 5.5/7.5 kw:              10 HP 30-min Duty Rating
Spindle Speed - Inline Direct Drive:     12,000 RPM
                                         (6K, 8K, 10K & 15K Optional)
Tool Type:                               CAT #40 Taper (BT #40 Optional)
Spindle Taper Material/Hardness:         SCM415/HRC48-62
Spindle Runout:                          0.000040" T.I.R.
Spindle Bearings - Front:                100MM NSK 70BNR 
                                         P4 Class 7 Bearings x 2
Spindle Bearings - Rear:                 100MM NSK 70BNR
                                         P4 Class 7 Bearings x 2
Retention System/Holding Capability:     Bellville Spring Stack 1650-1750 lbs
Retention Knob Specification:            #40 Japanese Standard

Accuracy X/Y/Z Axis (JIS6338):           +/- 0.0002"/12" 
                                         +/- 0.005MM Over 300MM Travel
Repeatability X/Y/Z Axis (JIS6338):      +/- 0.0002"/12" 
                                         +/- 0.005MM Over 300MM Travel
Least Input Command Increment:           0.0001"/0.000040"
                                         0.001MM/(40 millionths in metric)
Rapid Traverse X/Y/Z Axis:               1,417/1260 IPM 36M/32M Minute
Cutting Feedrate:                        0.02 - 393 IPM 10M/Minute
Axis Drive Motor Power X/Y Axis:         2.7HP (2.0kw) Mits HF 204S-3000
Axis Drive Motor Power Z Axis:           3.35HP (2.5kw) Mits HF 254SB w/brake
Ballscrews X/Y/Z Axis:                   32MM  / 12MM Pitch
Linear Ways X/Y/Z Axis:                  30/35/35MM Premium Cross Roller
Thrust Force Z (Max/Constant):           4408 lbs/2204 lbs   2,000kg/1000kg

Tool Capacity (20+1):                    20 Tool Twin Arm High Speed Changer
Tool Shank:                              CAT #40 Taper (BT#40 Optional)
Tool Change Time:                        1.7 Sec Tool to Tool
Max. Tool Diameter w/adjacent tool:      5.90"/3.15"  150MM/80MM
Max. Tool Length (from gage line):       11.81"       300MM
Max. Tool Weight:                        15 lbs       7kg
Tool Selection/Tool Access:              Random Access/Bi-directional

Air Service Requirements:                85 psi @ 14-scfm
Connected Load Electrical Requirements:  220vac +/-5%, 60HZ 30KVA
Coolant Capacity/Pressure:               68 Gallons/300PSI  256 Liters/20 Bar
Floor Space Requirements (W x D x H):    87" x 73" x 113" 218x186x228 CM
                                         Add 44" For Conveyor)
Shipping Dimensions (W x D x H):         97" x 91" x 101" 246x229x256 CM
Machine Weight:                          9,923 lbs   4,500 kg
Warranty - 1 Year Machine Warranty:      3 Year Mitsubishi Control, Motors
                                         & Drive Warranty

VFM-2416 3-Axis VMC Production Package   $69,990.00

Includes All Of The Productivity Features Shown Below

  Mitsubishi High Performance M720 Control, Motor & Drive Package
  12,000 RPM Direct Drive Beltless Spindle
  Big Plus Dual Contact High Performance Precision Spindle
  20 Tool High Speed Twin Arm Tool Changer
  300 PSI Through The Spindle Coolant w/Rotary Union
  Chip Conveyor - Link Belt Style w/40" Barrel Height Discharge
  Chip Wash/Down System - Washes Chips Into Conveyor
  Full Machine Enclosure w/Top Covers & Precut Exhaust Duct
  Spindle Air Blast By M-Code
  Spindle Oil Cooler - Thermostatically Controlled
  Coolant Oil Skimmer To Control Coolant Contaminants
  Remote Operator MPG Hand Wheel
  High Speed Synchronous Rigid Tapping
  4th & 5th Axis Prewired w/Quick Disconnect Connectors
  Dual LED High Intensity Worklamps
  12 Thru Tool Coolant Pull Studs

For Full Pricing Including Options, Details, Etc, Please Open The Attached pdf


Get a Quote

City St ZIP:

How did you hear of us?
Additional information on your request:

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page