"NEW" GANESH KSL 7612TMY, MITS M70L, 2014, 17" Swing, 21" Turning   Our stock number: 343679

NEW GANESH KSL 7612TMY, MITS M70L, 2014, 17 Swing, 21 Turning

Click on picture below for larger version
NEW GANESH KSL 7612TMY, MITS M70L, 2014, 17 Swing, 21 TurningNEW GANESH KSL 7612TMY, MITS M70L, 2014, 17 Swing, 21 Turning

Featuring:
  17" Swing Diameter
  21" Turning Length
  3" Bar Capacity
  12 Station VDI-40 "Quick-Change" Tool Turret w/7HP Milling
  Y-Axis w/4" of Travel +/- 2" Off of Centerline
  C-Axis w/Full Contouring Capability
  Programmable Tailstokc w/MT #5 Programmable Quill
  10" Hydraulic 3-Jaw Lathe Chuck w/Set of Soft Jaws
  Chip Conveyor and Chip Cart Included w/Machine
  Parts Catcher
  Renishaw Tool Probe

General Specifications As Per Brochure (must be verified by buyer):

GANESH KSL-7612 TMY CNC LATHE SPECIFICATIONS:

CAPACITY
Swing over bedways:                     17.7" (450 mm)
Maximum turning diameter:               12.6" (320 mm)
Maximum turning length:                 21.6" (550 mm)
Between centers distance:               30.5" (775 mm)

SPINDLE
Spindle nose/Spindle bearing NSK NN3026 A2-8 / 4-ball bearing spindle
                                          w/double roller bearing
Bar capacity / Spindle bore:            3.07"O (78 mm) / 3.58"(91mm)
Spindle bore diameter/bearing diameter: 3.58" O (91 mm) / 130mm internal
                                         bearing diameter
Maximum spindle speed:                  3300 RPM (3,000 RPM when using 12" ck)
Spindle motor horsepower:               30-HP Peak
Spindle center height:                  48.5" (1230mm)

TOOL TURRET Rated for 700-PSI coolant pressure
Number of turret stations:              12 Any combination of 12 ID, OD
                                          or Live tool stations
Tooling type/(toothed-rack cross bolt on top)
                                        VDI-40 DIN 5480 (axial Type-A face
                                          mounting tool turret)
Driven tool holder specification:       DIN 5480 - Spline drive driven tool 
                                          coupling (Sauter type)
Driven tool motor power / speed:        7-HP with 14.75 ft. lbs. of torque
                                          (20 nm) / 4,000 RPM
Turret index time (adjacent tool):      0.8 seconds
Turret disk diameter:                   17.32" (440 mm)

AXIS SPECIFICATIONS
X - Axis Travel / Ballscrew diameter:   10.27" (270 mm) / 40mm x 8mm pitch
                                          ballscrew
Z - Axis Travel / Ballscrew diameter:   23.62" (600 mm) / 45mm x 8mm pitch
                                         ballscrew
Y - Axis Travel / Ballscrew diameter:   4" Y-axis travel = +/-1.97" (+/-50mm)
                                          / 36mm x 8mm ballscrew
Rapid Travers Rate - X-axis:            787 ipm (20 m/minute)
Rapid Travers Rate - Z-axis:            787 ipm (20 m/minute)
Axis Servo Motor Power - X,Y,Z axis:    4.7 HP (3.5kw) Mits servo motors
Maximum Cutting Feedrate:               394 ipm (10 m/minute)
Minimum Programmable Input:             0.000039" (0.001mm)

TAILSTOCK (Programmable) Tag-Along Style. M-code pin-coupled to turret for
  positioning
Quill Stroke / Quill Thrust:            4.92" (125 mm) / 2975 lbs. ( 1350kg)
Quill Diameter:                         3.74" O (95 mm)
Quill Taper:                            Morse Taper MT-5

MACHINE SPECIFICATIONS
Connected Electrical Load:              48KVA - 125amps @ 220 VAC  5%
                                          service
Pneumatic Requirements:                 Air service is not required for
                                          this machine
Coolant Tank Capacity:                  32-gallon tank w/ dual coolant
                                          filtration
Coolant Pump - Flood Coolant:           HP High Flow - Headwall flood
                                         coolant
Coolant Pump - Tool Turret:             1-HP / 50 PSI - tool turret coolant
                                         (Walrus TPHK2T3-3)
Coolant Pump - High Pressure Option:    3-HP / 150 PSI - tool turret coolant
                                         (Walrus TPR2-9A)
Automatic Metered Lubrication system:   3-6cc /15-minute (adjustable
                                         lubrication flow rate)
Operator Door Access Width:             31" door opening width for E-Z
                                         operator access
Machine Weight (approx.):               15,470 pounds (7000 kgs)
Machine Footprint ( W x D x H ):        125" x 82" x 81" (add 34" for chip
                                          conveyor
Warranty - Standard (extended warranty available) 3-year control warranty
1-year machine warranty

GANESH KSL-7612 TMY Productivity Package $149,990.00

Productivity Package Includes:
  10-Piece Start-Up VDI Tooling set
  Chip Conveyor and Chip Cart
  Tailstock
  Live Center
  Parts Catcher
  Renishaw HPGA-LP2 Push-Button Tool Probe
  Barloader Interface
  10" 3-Jaw Chuck w/ 3" Through-Hole (TF3X-10)





Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page