"New" Ganesh VFM-2818 5X8, 12.6"X, 17.7"Y, 14.9"Z, 5-Axis Trunnion, 12K RPM   Our stock number: 342040

New Ganesh VFM-2818 5X8, 12.6 X, 17.7 Y, 14.9 Z, 5-Axis Trunnion, 12K RPM

Click on picture below for larger version
New Ganesh VFM-2818 5X8, 12.6 X, 17.7 Y, 14.9 Z, 5-Axis Trunnion, 12K RPMNew Ganesh VFM-2818 5X8, 12.6 X, 17.7 Y, 14.9 Z, 5-Axis Trunnion, 12K RPMNew Ganesh VFM-2818 5X8, 12.6 X, 17.7 Y, 14.9 Z, 5-Axis Trunnion, 12K RPM

Features:
  Integral 5-Axis Machining Capability (4+1 Simultaneous)
  8.3" Dia. Worm-Gear Driven Tilting Rotary Table
  Heidenhein Precision Rotary Encoders on A&C Axis
  Heidenhein Precision Linear Scales on X,Y & Z Axis
  12,000 RPM Inline Direct-Drive Beltless Spindle
  1,417 IPM Rapid Rates in X & Y Axis for Fast Production
  24-Tool High Speed Twin Arm Tool Changer- CAT or BT #40 Tooling
  Cross-Roller Style Linear Way System for Maximum Cutting Rigidity
  1,000 PSI "Through-The-Spindle" Coolant system with rotary coupling

General Specifications As Per Brochure (must be verified by buyer):

VFM-2818 5X8 TECHNICAL SPECIFICATIONS
AXIS TRAVEL
X-Travel:                                  12.6"/320mm
Y-Travel:                                  17.7"/450mm
Z-Travel:                                  14.9"/380mm
Spindle Nose to Rotary Table Surface:      2.11"- 15.62"/60 - 375mm
Spindle Center to Z-axis way covers:       17.71"/450mm (throat dimension)

TILTING ROTARY TABLE
Platter Diameter:                          8.34"/210mm
Center Bore Diameter:                      40 H7
T-slot width / Number:                     12 H7 / 4 Hardened & ground table &
                                           T-slots
Guide block width:                         18mm
Maximum Work table Load:                   165 lbs 75kgs
Maximum Part Swing:                        12.5"

SPINDLE
Spindle Motor - Mit Inline Direct-Drive:   15-HP peak Mitsubishi SJ-V7
                                           .5/7.5kw
Spindle Speed:                             12,000 rpm Direct-Drive
Spindle Torque:                            50 ft-lb @ 1,500 rpm
Tool Type:                                 CAT #40 Taper BT #40 optional
Spindle Taper Material / Hardness:         SCM415 / HRC 58-62
Retention System / Holding Capability:     Bellville Spring Stck 1650-1760 lbs
Spindle Runout:                            0.000040" T.I.R.
Spindle Bearings - Front:                  110mm NSK 70BNR 2/P4 class-7
Spindle Bearings - Rear:                   110mm NSK 70BNR 2/P4 class-7

AXIS FEEDS
Rapid Traverse X, Y:                       1,417 ipm 36m / minute
Rapid Traverse Z:                          944 ipm 24m / minute
Cutting Feedrate:                          0.04 - 394 ipm 10,000 mm/min
Axis Drive Motor Power - X, Y:             2.7-HP (2.0kw nominal)
                                           Mitsubishi HF204-3000
Axis Drive Motor Power - Z:                4.0-Hp (3.0kw nominal)
                                           Mitsubishi HF303B w/brake
Ballscrews - X, Y, Z:                      32mm ballscrews 12mm pitch
Thrust Force - Z (maximum / constant):     4408 lbs /2204 lbs 2,000 kg /1000kg
Least Input Command Increment:             0.0001" / 0.000040" 0.001mm / 
                                           (40-millionths in metric)

TOOL CHANGER
Tool Capacity (24+1):                      24-Tool Twin-Arm Hi-Speed 
                                           Tool Changer
Tool Shank:                                CAT#40 Taper BT#40 optional
Tool Change Time:                          1.7-sec. tool-to-tool
Maximum Tool Diameter / w/adjacent tool:   5.90"/3.15"  150mm / 80mm
Maximum Tool Length (from gage line):      11.81"       300mm
Maximum Tool Weight:                       15 lbs.      7kg
Tool Selection / Tool Access:              Random access Bi-directional 
                                           Shortest path

SPECIFICATIONS
Air Service Requirements:                  85 psi @ 5-scfm 7 Kg/cm2
Electrical Requirements - connected load:  220vac  5%, 60-Hz
Coolant Capacity / Pressure:               68-gallons / 1,000 psi 
                                           256 liters / 70-bar
Floor space requirements (W x D x H):      87" x 81" x 113" 
                                           221x206x288cm (add 48" for cnvyr)
Shipping dimensions (W x D x H):           97" x 91" x 101" 246x229x256cm
Machine Weight:                            9,960 pounds 4,500 kg
Warranty - 1-year machine warranty:        3-year Mitsubishi control, motors 
                                           & drive warranty

VFM-2818 5X8 5-Axis VMC (4+1) Production Package $129,990.00

Includes all of the accessories listed below:

  Chip Conveyor - Link-Belt w/ 40" Barrel-Height Discharge
  Glass Scales Feedback on X, Y, and Z Axis
  1,000 PSI (70-Bar) "Through-the-Spindle" Coolant System
  Full Machine Enclosure with Top Covers (precut for exhaust duct)
  Rotary Encoder Feedback on A and B Axis
  Spindle Oil Cooler - Thermostatically controlled
  Remote Operator MPG Hand wheel
  High-Speed Synchronous Rigid Tapping
  Dual LED High-Intensity Worklamps
  16GB Data Server and Ethernet connectivity
  Tramp-Oil Coolant Recovery System
  10-Thru-Tool-Coolant Pull Studs

For Full Pricing Including Options, Details, Etc., Please Open The Attached

pdf File.







Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page