LEXAIR Multi Mini Rhinobar, 6' or 12', three sizes (NEW)   Our stock number: 340892

LEXAIR Multi Mini Rhinobar, 6' or 12', three sizes (NEW)

Click on picture below for larger version
LEXAIR Multi Mini Rhinobar, 6' or 12', three sizes (NEW)

General Specifications from Manufacturer

Specifications - The MULTI MINI RHINOBAR utilizes a single tube, muzzle-loaded

design with interchangeable three tube cartridge.  One cartridge of the

customer selected sizes is included in the base MULTI MINI RHINOBAR price.

The MULTI MINI RHINOBAR can accommodate bar stock up to 3/4" diameter by 6' or

12' lengths.
Overall length - 17'. For applications where space does not permit using a

full  12' bar, a 6' bar model is available with overall length of 11'.

The hydraulic system requires 15 gallons of Pennzoil AW-100 hydraulic oil or

equivalent, which is supplied by the customer.  Pump motor - 1 hp, 220/440

volts, 3 phase.

       MULTI MINI RHINOBAR Features
 *Engineered for Swiss style CNC screw machines & small headstock lathes
 *Feed tube indexing in seconds
 *Standard Z axis capability
 *Positive, pusher retention system
 *Heavy duty construction for maximum rigidity and vibration prevention
 *Unique swing-out mechanism for ease of reloading bar stock 
 *Removable pendant for convenient operator control

Quality and utility are the basis of the MULTI MINI RHINOBAR bar feed and no

effort has been spared to insure that the end product will provide the service

you require.

All prices subject to change without notice*****


MULTI MINI RHINOBAR Model MMRB .750-12'-----------------------------$15,750.00
MULTI MINI RHINOBAR Model MMRB .750-6'------------------------------$15,750.00

Additional Feed Tube Cartridges  priced as follows:

1/4", 3/8", 1/2" ................................. $3,800.00
1/4", 1/2", 5/8" ..................................$3,800.00
3/8", 1/2", 3/4" ..................................$3,800.00
Optional cartridge with 1 1/8" feed tube...........$4,630.00

Optional Spindle Liners - Each spindle liner size is priced as follows:
NOTE:  Prices based on Lathe Draw tube I.D., not stock size.
1/4" to 3/4"...................................... $520.00 each

NOTE:  All bar stock must have a 30 degree chamfer cut on the pusher end to

achieve the highest performance.

Optional Step Down Transformer for lathe applications that run on 
   440 Volts.......................................................... $475.00

Custom Electrical Cable Package with plugs  
THIS IS REQUIRED ON ALL BAR FEED-LATHE APPLICATIONS, WHETHER FIXED
 HEAD STOCK OR SWISS SLIDING HEAD STOCK MACHINES...................... $360.00

Optional Front Mounted Safety Switch
 (For use on Swiss Screw Machine applications)........................ $550.00

Warranty - One year, parts and workmanship

Electrical Lathe Interface - Lathe must have programmable open & close of

chuck and an appropriate interface provided by the lathe manufacturer. If an

interface is not available, please contact Lexair and we will work with the

lathe manufacturer or quote the cost to develop an interface where possible.

Installation - The standard installation includes set-up and leveling of the

bar feeder, alignment with lathe spindle and bolting to floor (bolts

included), electrical connection to lathe, (interface supplied by builder),

training and run-off of the bar feeder.

Proper training and run-off depend on the lathe being operational, tooled and

programmed, as well as stock and machine operator being available.

Note: Additional time, travel and expenses caused by customer, dealer or OEM

delays will be billed at $120 per hour on site, $60.00 per hour travel plus

expenses.

Installation by Lexair Personnel................................... $2,800.00

Delivery - 12 to 15 working days



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page