"New" Ganesh GMV-4, 12" x 54" Table, 4,000 RPM, 40 Taper Spindle   Our stock number: 339394

New Ganesh GMV-4, 12 x 54 Table, 4,000 RPM, 40 Taper Spindle

Featuring:
  Class-7 Super Precision Fafnir Spindle Bearings
  5-Horsepower Variable Speed Head
  80 - 4,000 RPM Spindle  Speeds (5,000 RPM Inverter Spindle Optional)
  Square Box Ways on Knee & Column - Y & Z Axis
  1.5-Horsepower Knee Power Feed Motor
  Automatic Lubrication System for Slideways and Leadscrews
  Hard-Chrome Plated Quill
  40-Taper Spindle
  1-Year Warranty

General Specifications As Per Brochure (must be verified by buyer):

STANDARD GANESH GMV-4 MACHINE SPECIFICATIONS:


TABLE:
Table Size:                             12" X 54" (254mm X 1372mm)
Table Travel / (With Power Feed):       36" (914mm) / 32" (812mm)
Table Capacity:                         1200 lbs
T-slot width (3 Ground T-Slots):        5/8" with ground reference edges
                                        (15.9mm wide)
  
MACHINE TRAVELS & CAPACITY
Table Travel - X axis/(With Power Feed):36" (914mm) / 32" (812mm)
Cross Travel - Y axis:                  16" (400mm)
Knee Travel - Z axis:                   16" (406mm)
Ram Travel:                             17.7" (450mm)
Spindle Nose-to-Table TravelL:          2" - 18" (50 - 457mm)
Quill Travel - Manual & Power Feed:     5" (127mm)
Quill feeds - With Trip Release:        0.0015", 0.003", 0.006" (0.038mm
                                        0.076mm, 0.152mm) 
Quill Diameter:                         4.13" (105mm)
Leadscrews with ground pitch (X & Y):   200" per rev. (5mm) (ballscrews
                                        available)
Adjustable scale ring resolution:       0.001" (0.0254mm)

Slide Ways:                             Hardened & Ground Meehanite Cast Iron
Longitudinal Table - Z Axis:            Hardened & ground dovetail ways
Cross Slide to Knee - Y Axis:           Hardened & ground square box ways
Knee to Column - Z Axis:                Hardened & ground square box ways

SPINDLE HEAD

Head tilt (Left-to-Right):              90 - 0 - 90 degrees
Head tilt (Front-to-Back / Up-Down):    45 - 0 - 45 degrees
Head Swivel:                            360-degrees
Spindle Motor:                          5-HP, 3-Phase 208-240 vac 
                                        (5-HP option)
Spindle Taper:                          40-taper 
Spindle Runout:                         0.0002" maximum runout (0.005mm)
Spindle Bearings:                       Fafnir ABEC-7 matched set of 
                                        Class-7 bearings
Variable Speed Drive - Dual Range:      80 - 520 rpm (low-range) / 
                                        600 -4000 rpm (high-range)

Note: 5,000-RPM Electronic Variable-Speed Spindle available with the optional

AC Inverter Spindle Head

DIMENSIONS & WEIGHT
Power Requirements:                     3-Phase 220 vac @ 44-amps 
                                        (440 vac optional)
Coolant Capacity:                       11-Gallons (41 liters)
Machine weight:                         3528 lbs

THESE BASIC ACCESSORIES ARE INCLUDED WITH EACH MACHINE - A $3,500 VALUE
Motorized Knee Power Feed               $1,295  Value
Spring Loaded Way Covers                $  495  Value
2-Cooling Fans in Spindle Head          $  395  Value
Halogen Work Light                      $  395  Value
Automatic Lubrication System            $  295  Value
Coolant Pump & Nozzle                   $  495  Value
Coolant & Chip Tray                     $  295  Value
(Hi-Torque 1.5-HP knee powerfeed included with each machine)

For full quote with option list & pricing details, etc, please open the
attached pdf file.





Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page