"NEW" Ganesh VFM-4024 Express, 40.55" x 23.62"Y x25.59"Z, 12K RPM, CTS   Our stock number: 339314

NEW Ganesh VFM-4024 Express, 40.55 x 23.62 Y x25.59 Z, 12K RPM, CTS

Click on picture below for larger version
NEW Ganesh VFM-4024 Express, 40.55 x 23.62 Y x25.59 Z, 12K RPM, CTSNEW Ganesh VFM-4024 Express, 40.55 x 23.62 Y x25.59 Z, 12K RPM, CTS

  12,000 RPM Inline Direct-Drive Beltless Spindle
  Big-Plus Dual Contact High-Performance Precision Ground Spindle
  30-Station Twin-Arm Tool Changer For CAT or BT#40 Tooling
  1,417 IPM Rapid Rates For Efficient Production
  300 PSI "Through-The-Tool" Coolant System With Rotary Coupling
  Large Axis Travels For Big Work - 40.5" x 23.6" x 25.6"
  4th & 5th Axis Wiring Is Included With The Machine

General Specifications As Per Brochure (must be verified by buyer):

X-Travel:                                40.55"/1,030mm
Y-Travel:                                23. 62"/600mm
Z-Travel:                                25.59"/650mm 
Spindle Nose to Table Surface:           5.1"- 27.56"/130 - 700mm
Spindle Center to Z-axis covers:         22.83"/580mm (throat


Table Size (LxW):                        43.3" x 19.68"/1,100mm X 500mm
T-slots 5 total:                         0.709" slot width
                                         18 mm wide on 100mm centers
Max. Table Load:                         1,541 lbs/700kgs

SPINDLE - Big Plus
Spindle Motor:                           25 HP Peak
                                         15-HP (30-minute duty rating) 
Spindle Speed - Inline Direct-Drive:     12,000 rpm
                                         (15,000 & 24,000rpm optional)
Spindle Torque:                          90 ft-lb @ 1,500 rpm
Tool Type:                               CAT #40 Taper (BT #40 optional)
Spindle Taper Material / Hardness:       SCM415 / HRC58-62
Retention System / Holding Capability:   Bellville Spring Stack
                                         1650-1760 lbs
Spindle Runout:                          0.000040 T.I.R.
Spindle Bearings - Front:                110mm NSK 70BNR
                                         2 - P4 class-7 bearings 
Spindle Bearings - Rear:                 110mm NSK 70BNR   
                                         2 - P4 class-7 bearings

Rapid Traverse - X and Y:                1,417 ipm 36m / minute
Rapid Traverse Z:                        1,260 ipm 32m / minute
Cutting Feedrate:                        0.04 - 810 ipm
Axis Drive Motor Power - X, Y:           5-HP (3.5kw) Mitsubishi HF354S-A48
Axis Drive Motor Power - Z:              5-HP (3.5kw) Mitsubishi HF354BS-A48
Ballscrews - X, Y, Z:                    40mm ballscrews with 12mm pitch
Maximum Thrust Force:                    4408 lbs 2,000 kg
Constant Thrust Force:                   2204 lbs 1,000kg 

Tool Capacity - 30+1:                    30 Tool Twin-Arm
Tool Shank:                              CAT 40 Taper Big Plus
Tool Change Time:                        1.7 sec tool-to-tool
Maximum Tool Diameter / w/adjacent tool: 5.90" / 3.15"   150mm / 80mm
Maximum Tool Length:                     11.81"          300mm
Maximum Tool Weight:                     15 lbs. 7kg
Tool Selection / Tool Access:            Random access / Bi-directional

Air Service Requirements:                85 psi @ 5-scfm 7 Kg/cm2
Coolant Capacity:                        100 gallons
Connected load electrical requirement:   220vac  5%, 60-Hz
Floor space requirements:                115" x 87" x 116"
                                         (add 48" on left side for conveyor)
Shipping dimensions (L x W x H):         169" x 92" x 96"   306x231x256cm
Machine Weight:                          13,228 pounds  6,000 kg
Warranty - 1-year machine warranty:      3-year Mitsubishi control w/motor &
                                         drives warranty)

VFM-4024 3-Axis VMC Production Package      $99,990.00 

Includes all of the productivity features shown below:

**Mitsubishi High-Performance M720/730 Control, Motor, and Drive Package
  The Premium Mitsubishi M720P-4VS Control With Large 15" LCD Screen For Easy
  16GB Data Server and High-speed Machining Capability Supports 4 & 5-Axis (4+1)

  Highly Accurate Digital Servo Motors Support High Speed 680-block Program

  Graphic Display, Tool Life Management & expandable card memory are included.
  A 1-year Machine Warranty & 3 Year Mitsubishi Control, Motor & Drive
    Warranty Included 

For full quote with option list & pricing details, etc, please open the

attached pdf file.

Get a Quote

City St ZIP:

How did you hear of us?
Additional information on your request:

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page