1-1/4" GANESH CYCLONE 32NCY, 2009, 4-axis, Gang, sliding headstock, 7-live tools   Our stock number: 336196

1-1/4 GANESH CYCLONE 32NCY, 2009, 4-axis, Gang, sliding headstock, 7-live tools

Click on picture below for larger version
1-1/4 GANESH CYCLONE 32NCY, 2009, 4-axis, Gang, sliding headstock, 7-live tools1-1/4 GANESH CYCLONE 32NCY, 2009, 4-axis, Gang, sliding headstock, 7-live tools1-1/4 GANESH CYCLONE 32NCY, 2009, 4-axis, Gang, sliding headstock, 7-live tools1-1/4 GANESH CYCLONE 32NCY, 2009, 4-axis, Gang, sliding headstock, 7-live tools
1-1/4 GANESH CYCLONE 32NCY, 2009, 4-axis, Gang, sliding headstock, 7-live tools1-1/4 GANESH CYCLONE 32NCY, 2009, 4-axis, Gang, sliding headstock, 7-live tools1-1/4 GANESH CYCLONE 32NCY, 2009, 4-axis, Gang, sliding headstock, 7-live tools

General Specifications As Per Brochure (Please Verify Details);

***************** VERY LOW HOURS **************

AXIS TRAVELS
CNC Controlled Axis                  4 (X,Y,Z,&C) w/High-Performance C-axis
X-Axis Travel (Vertical Tool)        7.5" (190mm) THK (Japan) Linear Ways
Y-Axis Travel (Cross Tool)           11.4" (290mm) THK (Japan) Linear Ways
Z-Axis Travel (Sliding Headstock     6.5" (165mm) THK (Japan) Linear Ways
C-Axis Travel (Rotational Axis)      360 degrees (360,000 radial positions)

SPINDLE
Spindle Bore (Usable bar diameter)   1.25" (32mm) 
Spindle Speed Range                  100-6,000 RPM (or Hi Torque 4,000 RPM Optional)
Spindle Horsepower                   10-HP 
Spindle Center Height                38" (965mm)
Rigid Tapping on Main Spindle        Yes
Spindle Collet Type                  Traub A-32

TOOLING SYSTEM
Number and size of turning tools     6 Tool Stations of " or 12mm
  (5 stations of 5/8" Optional)
Number of Internal Static Tools      5 ID tool stations (25mm bores) 
  for tool bushings/collets
I.D. Tool Bores (Round Shank)        25mm bore for ER-20 collets or split 
  or solid tool bushings

DRIVEN TOOL SYSTEM
Number of cross working driven tools 4-cross driven tool stations 
  with ER20 collet holders
Number of end working live tools     3-axial driven tool stations with
  ER20 collet holders
Size of driven tools (round shank)   ER-20 collet capacity (1/16" - ")
  (1-13mm) diameter
Rigid Tapping with Driven Tools      YES
Driven Tool programmable range       0-6,000 RPM - stepless speed range
Driven Tool HP                       2.0 (HP) 1.5kw (Radial Live Tools)

AXIS DRIVES
Rapid Travers Rate - X,Y,&Z axis     1.181 ipm (30m/minute)
Maximum federate for thread cutting  236 (ipm (6m/minute)
Minimum Programmable Input           0.000039" (0.001mm)
C-Axis Resolution                    0.001 degree (360,000 Radial Positions)
Brushless AC Servo Motor Drive       X = 1.5HP (1KW), Y&Z =.75 HP (.5 KW)
Ballscrew diameter                   25mm double-nut NSK ballscrews

SYSTEM REQUIREMENTS
Connected Load Power Consumption     16 KVA - 42 amps @ 208-240 vac 
Pneumatic Requirements               80 - 90 psi @ 1 cfm for parts catcher
  and spindle brake
Coolant Pump Motor/ Tank Capacity    3/4 HP / 25 gallon tank with 
  dual filtration
Automatic Metered Lubrication system 3-6cc/15-minute 
  (adjustable lubrication flow rate)

MACHINE DIMENSIONS
Floor Space - L X W                  72.9" X 63.4" (1,852 x 1,611mm)
Machine Height                       75.5" (1,919 mm)
Machine Net Weight                   5,500 lbs (2,500 kgs)

Equipped With:
  Fanuc CNC Control
  Rigid Tapping 
  Line input transformer
  Misc Tooling
  Barfeed interface
  Parts Catcher and conveyor
  Fanuc CNC Control 
  Y Axis
  Full C Axis 
  Spindle Brake
  Parts Catcher
  Chip Conveyor
  Full C-Axis
  240V/3Phase/60Hz/ 30amp
  Full Set of Manuals 
Large Quantity of Tooling & Collets
  4 Radial live tool Holder (ER20 Collet style)
  3 Axial Live tool Holder (ER20 Collet style)
  5 ID tool Post 25mm Bushing
  6 OD Turning Tools 1/2" Square Shank w. Wedge lock system
Hardinge 22 Collets, 
  Over 30 Collets from 1/8 - 1-1/8 in 1/8 Ranges for Round & Various Square/Hex

Less than 1000 hours 

Under power for your immediate inspection!



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page