8mm (.315") - 63.5mm (2.5") Dia, IEMCA Master 865/12/MP, Fixed Headstock, NEW   Our stock number: 319939

8mm (.315 ) - 63.5mm (2.5 ) Dia, IEMCA Master 865/12/MP, Fixed Headstock, NEW

Click on picture below for larger version
8mm (.315 ) - 63.5mm (2.5 ) Dia, IEMCA Master 865/12/MP, Fixed Headstock, NEW

General Specifications As Per Brochure:

Bar Size Capacity:                             8mm (.315") - 63.5mm (2.5")
Bar Length Capacity:                           12'
Maximum Bar Length:                            12' 4"
Minimum Bar Length:                            39"
Magazine Capacity, Single Rack:                12.5 linear inches
Magazine Capacity, Multi Rack:                 47 or 71 linear inches
Magazine Capacity, Bundle:                     5500 lbs.
Maximum Remnant Length:                        15" up to 2.55"diameter
                                               10" for larger diameters
Operating Voltage:                             230V AC 3 Phase(400V Available)

Control Voltage:                               24 Volts DC
Total Power Required:                          3.75 kVA/3.0 kW
Compressed Air Required:                       90 PSI, 1 cfm
Guide Channel Oil:                             ISO 150, 25 Gal. (not Incl.)

Feeding Speed:                                 6"/sec (adjustable)
Facing Accuracy:                               +/- .020"
Bar Change Time:                               30 seconds for 12' bar
Bar Straightness Requirement:                  .007"/foot
Bar Feeder Shipping Weight:                    3640 lbs.
Color:                                         RAL 5002 Blue, RAL 7035 Light

Standard Equipment Includes:
Custom Electric Cable Package
Remnant Retract, Bushing Device
Guide Channel Set Includes:
 =1 Bar Pusher, 1 Nose, 1 Rotating Tip, 1 Split Bushing, 1 Collet



Master 865/12/MP with two (2) complete guide 
channel sets which includes 2 bar pushers, 
2 rotating tips, 2 collets,2 noses,

2 split bushings and 1 spindle liner:          $ 50,400.00

Package B

Master 865/12/MP with three (3) complete guide 
channel sets which includes 3 bar pushers, 
3 rotating tips, 3 collets, 3 noses,

3 split bushings and 2 spindle liners:          $ 52,900.00

Category III Interface:                         $  1,400.00
Special Adaptation Kit:                         $  1,600.00

IEMCA/Bucci USA Installation:                   $  3,100.00

Includes labor, travel and 12 month warranty

Important Notes:
Bar Feeder Installation does not include lathe-side software

or hardware for magazine bar feeder interface.This interface must be supplied

and installed by the lathe OEM or Distributor, prior to bar feeder

installation.Maximum Bar diameters are for front ejection of the remnant. For

remnant retraction, maximum diametersare slightly less. Bar straightness,

proper guide channel selection, correct alignment and anchoring ofbar feeder

will ensure optimum performance at maximum rpm.

Get a Quote

City St ZIP:

How did you hear of us?
Additional information on your request:

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page