General Specifications As Per Brochure: Bar Size Capacity: 8mm (.315") - 63.5mm (2.5") Bar Length Capacity: 12' Maximum Bar Length: 12' 4" Minimum Bar Length: 39" Magazine Capacity, Single Rack: 12.5 linear inches Magazine Capacity, Multi Rack: 47 or 71 linear inches Magazine Capacity, Bundle: 5500 lbs. Maximum Remnant Length: 15" up to 2.55"diameter 10" for larger diameters Operating Voltage: 230V AC 3 Phase(400V Available) Control Voltage: 24 Volts DC Total Power Required: 3.75 kVA/3.0 kW Compressed Air Required: 90 PSI, 1 cfm Guide Channel Oil: ISO 150, 25 Gal. (not Incl.) Feeding Speed: 6"/sec (adjustable) Facing Accuracy: +/- .020" Bar Change Time: 30 seconds for 12' bar Bar Straightness Requirement: .007"/foot Bar Feeder Shipping Weight: 3640 lbs. Color: RAL 5002 Blue, RAL 7035 Light Gray Standard Equipment Includes: Custom Electric Cable Package Remnant Retract, Bushing Device Guide Channel Set Includes: =1 Bar Pusher, 1 Nose, 1 Rotating Tip, 1 Split Bushing, 1 Collet Options PACKAGE A Master 865/12/MP with two (2) complete guide channel sets which includes 2 bar pushers, 2 rotating tips, 2 collets,2 noses, 2 split bushings and 1 spindle liner: $ 50,400.00 Package B Master 865/12/MP with three (3) complete guide channel sets which includes 3 bar pushers, 3 rotating tips, 3 collets, 3 noses, 3 split bushings and 2 spindle liners: $ 52,900.00 Category III Interface: $ 1,400.00 Special Adaptation Kit: $ 1,600.00 IEMCA/Bucci USA Installation: $ 3,100.00 Includes labor, travel and 12 month warranty Important Notes: Bar Feeder Installation does not include lathe-side software or hardware for magazine bar feeder interface.This interface must be supplied and installed by the lathe OEM or Distributor, prior to bar feeder installation.Maximum Bar diameters are for front ejection of the remnant. For remnant retraction, maximum diametersare slightly less. Bar straightness, proper guide channel selection, correct alignment and anchoring ofbar feeder will ensure optimum performance at maximum rpm.
to complete inventory display
to our home page