General Specifications As Per Brochure Max. Pressure: 80 Bar 1200 PSI Coolant Volume: Fixed Rate System 60 Liters / Minute 16 GPM Tank: 380 Liter / 100 Gallon Filtration: Dual Parallel Bags Outlets: 2 The J2-60 operates as two completely independent 30 liter (8 gpm) modules for dual turrets or as a single 60 liter (16 gpm) fixed volume unit. Standard Configuration: The ChipBLASTER J2-60 is fed by a transfer pump that draws from the machine tool sump, through the filter vessel to the integral380 liter (100 gal) tank. When the machine tool calls for coolant, the filter pump(s) draws the coolant from the ChipBLASTER tank and pumps through the post (safety) filter to the inlet of the positive displacement pump. The coolant then flows at high pressure through a series of distribution and safety valves and on to the machine tool. 1 "M" Code Controlled Signal is Required to Operate as One High Volume Outlet 2" M" Code Controlled Signals are Required to Operate as Two Independant Modules 24 VDC, 110 VAC or 240 VAC Signal is Acceptable *If your machine uses pulsed "M" codes, please contact ChipBLASTER Required Electrical Power: 56 amps, 230 VAC, 3 Phase, 60 Hz 28 amps, 460 VAC, 3 Phase, 60 Hz 35 amps, 400 VAC, 3 Phase, 50 Hz Ideal for Machine Tools Up to 30 Kw (40 HP), Dual Turret Lathes & 50 Taper Mills. See brochure for more details and options.
to complete inventory display
to our home page