General Specifications As Per Brochure Max. Pressure: 80 Bar 1200 PSI Coolant Volume: Fixed Rate System 30 Liters / Minute 8 GPM Tank: 380 Liter / 100 Gallon Filtration: Single Bag Outlets: 1 For machine tools up to 15 kw (20 hp) Standard Configuration: The ChipBLASTER J-30 is fed by a transfer pump that draws from the machine tool sump, through the filter vessel to the integral 380 liter (100 gal) tank. When the machine tool calls for coolant, the filter pump(s) draws the coolant from the ChipBLASTER tank and pumps through the post (safety) filter to the inlet of the positive displacement pump. The coolant then flows at high pressure through a series of distribution and safety valves and on to the machine tool. M Code Requirement: 1 "M" Code Controlled Signal is Required for Activation/Deactivation of the Chip Blaster A 24 VDC,110 VAC or 240 VAC Signal Is Acceptable *Latching "M" codes are standard, If your machine uses pulsed "M" codes, please contact ChipBLASTER Required Electrical Power: 28 amps, 230 VAC, 3 Phase, 60 Hz 14 amps, 460 VAC, 3 Phase, 60 Hz 18 amps, 400 VAC, 3 Phase, 50 Hz Ideal for Machine Tools Up to 15 Kw (20 HP) See brochure for more details and options.
to complete inventory display
to our home page