General Specifications As Per Brochure

Max. Pressure:                           100 Bar

                                         1500 PSI

Coolant Volume:                          Automatically Variable
                                         36 - 180 Liters / Minute
                                         9 - 48 GPM
Tank:                                    900 Liter / 240 Gallon
Filtration:                              Triple Parallel Bags
Outlets:                                 3

The WV3-180 can operate as three completely independent 60 liter (16 gpm)
modules or combine to give you high pressure AND very high volume (180
liters) to one outlet at any time during the same program!


Standard Configuration:
The ChipBLASTER WV3-180 is fed by a transfer pump that draws from the machine

tool sump, through the filter vessel to the integral 900 liter (240 gal) tank.

When the machine tool calls for coolant, the filter pump(s) draws the coolant

from the ChipBLASTER tank and pumps through the post (safety) filter to the

inlet of the positive displacement pump. The coolant then flows at high

pressure through a series of distribution and safety valves and on to the

machine tool.

M Code Requirement:
  1 "M" Code Controlled Signal is Required to Operate as One High Volume

  Outlet.
  3 "M" Code Controlled Signals Are Required to Operate as Three Independent

  Modules
  4 "M" Code Controlled Signals Are Required to Operate as Three Independent

  Modules AND One High Volume Outlet.
24 VDC,110 VAC or 240 VAC signal is acceptable needed
* If your machine uses pulsed "M: codes, contact ChipBLASTER

Required Electrical Power:
  106 amps, 230 VAC, 3 Phase, 60 Hz
  53 amps, 460 VAC, 3 Phase, 60 Hz
  64 amps, 400 VAC, 3 Phase, 50 Hz

Ideal for Machine Tools Up to 90 Kw (120 HP), Dual Turret Lathes & 50 Taper

Mills.

See brochure for more details and options.

RETURN to complete inventory display       RETURN to our home page